Question about Velbon CX-690 Tripod

Open Question

Velbon cx 680 plastic leg clamp u/s

Plastic leg clamp - snaped. Is it possible to obtain a replacment?

Posted by on

6 Suggested Answers

SOURCE: Velbon VMATE-607/F Tripod - Broken Leg Lock

duct tape

Posted on Feb 27, 2008


morgan747
  • 9 Answers

SOURCE: Leg clamp tightening adjustment on a 055 tripod

There should be a nut on the other side of the housing of the tightening lever that you can tighten. Turn the lever to unlock the leg then start with 1/8 th turns of the nut to tighten, then turn the lever to lock the leg. Do this until you get the desired locking.

Posted on Mar 20, 2009

  • 2 Answers

SOURCE: The lower leg clamp on my SLIK U212 deluxe is cracked.

Per another post on here i located a website which sells Slik parts -
http://kenkooutlet.com
- the part was cheap but the shipping was too high in my case. Good luck.

Posted on Jul 24, 2009

  • 1 Answer

SOURCE: parts for a velbon tripod

I broke the release lever on my Velbon Ultra Lux tripod and looking for a replacement.

Posted on Sep 19, 2009

  • 63 Answers

SOURCE: velbon AE spare parts

Hi Keypr.
For repairs on the broken Velbon leg, you can try and contact:
ToCAD America Service Dept.
300 Webro Road
Parsippany, NJ 07054

1-800-886-2236

Ask for an estimate.

Hope this helps,
Andrew

Posted on Apr 07, 2010

  • 8 Answers

SOURCE: I have a Velbon CX-570 Tripod and have lost the

The part you need is the velbon qb-4w. It is available from a variety of websites for about $9.

Posted on Jun 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I lost the shoe for my Velbone CX 586. I want a new shoe...


Take a look at www.tripodquickrelease.com, they carry Velbon quick releases.

Jun 09, 2012 | Tripods & Monopods

1 Answer

Need to replace the slide which attaches the three leg braces on a Velbon Videomate 607.


If you're in the UK or Ireland, contact Velbon here. For the rest of the world, contact them here.

Apr 19, 2012 | Velbon VIDEOMATE 607 Tripod

1 Answer

HI ! MY NAME IS ELENA AND I GOT A VELBON CX-44


Hi Elena,
Check the website: http://www.tripodquickrelease.com/Velbon_Quick_Releases.htm for your part needed. There were two CX series, 440 and 444. According to the site, you need quick release QB-4W or QB-4LC.
There are pictures of each quick release posted, so you can reference to the correct needed.
Hope this helps, Andrew

Jun 04, 2010 | Velbon CX-440 Tripod

1 Answer

I lost the quick release plate for my CX 470 Velbon tripod


you want the velbon qb-4w quick release plate. it is available from a variety of websites for about $9.

May 19, 2010 | Velbon CX-470 Tripod

1 Answer

Velbon AE spare parts


Hi Keypr.
For repairs on the broken Velbon leg, you can try and contact:
ToCAD America Service Dept.
300 Webro Road
Parsippany, NJ 07054

1-800-886-2236

Ask for an estimate.

Hope this helps,
Andrew

Apr 05, 2010 | Tripods & Monopods

1 Answer

I have a Velbon CX-570 Tripod and have lost the quick release platform and need to replace it. Where can I order it?


The part you need is the velbon qb-4w. It is available from a variety of websites for about $9.

Nov 19, 2009 | Velbon CX-470 Tripod

2 Answers

Parts for a velbon tripod


hi there, i think you can obtain the parts directly from Hakuba USA. www.hakubausa.com they're the USA distributers for Velbon and will actually repair it... if you can't by simply replacing a part. also a phone # 1-800-423-1623 and a seperate # 800-886-2236 to order quick release plates.

Jan 04, 2009 | Velbon VideoMate Deluxe Heavy-Duty...

1 Answer

VGB3 leg lock broke


On the velbon vgb 3, the leg locks consist of a lever, one or two pieces of metal and a plastic piece. The metal and plastic pieces rest in a depression against the lever. When the lever is pulled out, pressure against the smaller leg section is released. When the lever is pushed in, pressure against the smaller leg section is exerted, locking the legs in place. On the back side of each joint, there is a phillips head screw which acts as a stop to keep the leg section from coming all the way out. When the screw is backed out, the leg section can be removed, exposing the latching mechanism. If the only problem is that the latch mechanism came apart, it can simply be reassembled. If, however, something broke and allowed the latch assemby to come apart, that will have to be dealt with as well. My guess is that the phillips screw may have become loose, and the latch came apart.

Aug 14, 2006 | Velbon Chaser EFL-4 (A) Tripod

Not finding what you are looking for?
Velbon CX-690 Tripod Logo

Related Topics:

290 people viewed this question

Ask a Question

Usually answered in minutes!

Top Velbon Tripods & Monopods Experts

kakima

Level 3 Expert

96608 Answers

Steve

Level 3 Expert

3287 Answers

Brad Brown

Level 3 Expert

13550 Answers

Are you a Velbon Tripod and Monopod Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...