Question about Lexmark X4270 All-In-One InkJet Printer

1 Answer

There's an error 1200

Need some help please when printer comes on it keeps saying error # 1200

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lexmark Master
  • 13,433 Answers

Hey,

this page has had some successfull suggestions have a look
http://www.fixya.com/support/t241484-erropr_code_1200_lexmark_x4270

Posted on Feb 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

First time using, says error #1200


The 1200 error indicates that either the cartridge/s is not properly installed or snapped in the cartridge carrier, the encoder strip (transparent strip behind the cartridge carrier) is out of place or something is blocking the cartridge carrier's path. This article 1200 Error Message on a Lexmark X4250/X4270/F4270 All-In-One will help you identify and resolve the issue.

May 31, 2011 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

How do I fix 1200 error


Error code: 1200
This error code is commonly associated with the Dell 922 printer. Usually you might see the cartridge moving front and back and slamming itself against the printer. You need to tighten the strings located on the back of the printer and then it should work fine

Clean the carriage rail. This is the round chrome piece that the carriage assy that holds the cartridges rides on. Use a paper towel that is slightly moist.
Be sure to not force anything. Unplug the printer after you get the carts in the middle. Move them to one side and clean and then move them to the other and repeat.


Lift up the scanner to reveal the cartridge compartment; under the chrome rod on which the cartridges run there are two small gaps about 8cm apart. In the right one should sit the paper sensor which is a small black rod that hooks downwards; the problem I had was my sensor had bent up and out of the gap so all I had to do was bend it gently back into position using a small screwdriver.

Hope you get it to go.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Apr 25, 2010 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

Can't load Lexmark 1200 on Vista at all.


:Latest driver found in Lexmark site . Reinstall driver and let me know if there are still errors found.

Mar 21, 2010 | Lexmark X1270 All-In-One InkJet Printer

1 Answer

Printer not printing display error 1200 only.


Hi
Ok you can try this.
Error code: 1200
This error code is commonly associated with the Dell 922 printer. Usually you might see the cartridge moving front and back and slamming itself against the printer. You need to tighten the strings located on the back of the printer and then it should work fine

Clean the carriage rail. This is the round chrome piece that the carriage assy that holds the cartridges rides on. Use a paper towel that is slightly moist.
Be sure to not force anything. Unplug the printer after you get the carts in the middle. Move them to one side and clean and then move them to the other and repeat.


Lift up the scanner to reveal the cartridge compartment; under the chrome rod on which the cartridges run there are two small gaps about 8cm apart. In the right one should sit the paper sensor which is a small black rod that hooks downwards; the problem I had was my sensor had bent up and out of the gap so all I had to do was bend it gently back into position using a small screwdriver.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Mar 17, 2010 | Dell 922 All-In-One InkJet Printer

1 Answer

Error #1200----help cannot receive Fax but can send them


Hi There

Hardware Error: 1200

The All-In-One is stalled.

1. Press Power to turn off your all-in one.

2. Unplug your all-in-one fro the wall outlet.

3 Check for paper jams.

4 Plug in your all-in-one

Cartridge Error: 1200

The cartridge carrier is jammed.

1. Turn off you all-in-one

2. Unplug the all-in-one form the wall outlet.

3. Open the control panel.

4 Open the cartridge access door

5. Make sure the cartridges are snapped in place in the carrier.

6. Check for objects obstructing the carrier.

7. Plug in your all-on-one

8. Press power to turn your all-in-one back on.

Hope this resolves your issues.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on Helping.
All The Best: Pineworks

Feb 01, 2010 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

Dell 922 print carrier stall error message. Also, error 1200.


Hi
hope it will work
Error code: 1200
This error code is commonly associated with the Dell 922 printer. Usually you might see the cartridge moving front and back and slamming itself against the printer. You need to tighten the strings located on the back of the printer and then it should work fine

Clean the carriage rail. This is the round chrome piece that the carriage assy that holds the cartridges rides on. Use a paper towel that is slightly moist.
Be sure to not force anything. Unplug the printer after you get the carts in the middle. Move them to one side and clean and then move them to the other and repeat.


Lift up the scanner to reveal the cartridge compartment; under the chrome rod on which the cartridges run there are two small gaps about 8cm apart. In the right one should sit the paper sensor which is a small black rod that hooks downwards; the problem I had was my sensor had bent up and out of the gap so all I had to do was bend it gently back into position using a small screwdriver.

Hope you get it to go.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Nov 18, 2009 | Dell 922 All-In-One InkJet Printer

1 Answer

Replacement cartridges don't fit


Hi
Ok you can try Error code: 1200
This error code is commonly associated with the Dell 922 printer. Usually you might see the cartridge moving front and back and slamming itself against the printer. You need to tighten the strings located on the back of the printer and then it should work fine

Clean the carriage rail. This is the round chrome piece that the carriage assy that holds the cartridges rides on. Use a paper towel that is slightly moist.
Be sure to not force anything. Unplug the printer after you get the carts in the middle. Move them to one side and clean and then move them to the other and repeat.


Lift up the scanner to reveal the cartridge compartment; under the chrome rod on which the cartridges run there are two small gaps about 8cm apart. In the right one should sit the paper sensor which is a small black rod that hooks downwards; the problem I had was my sensor had bent up and out of the gap so all I had to do was bend it gently back into position using a small screwdriver.

Hope you get it to go.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Mar 28, 2009 | Dell 922 All-In-One InkJet Printer

1 Answer

ERROR 1200


Hi,

This error is caused by the cartridge carrier stall. To troubleshoot this problem, please visit the below mentioned link:

Troubleshoot - Error 1200


Please rate it Fixya if helpful.

Thank you

Feb 18, 2009 | Lexmark X4270 All-In-One InkJet Printer

3 Answers

Lexmark fax machine series x4270 has an error code saying #1200


Please click on this link :
http://support.lexmark.com/perl/support/support.cgi

and then click on support ,once the page is opened please center X4270 in
Search by Model ,after that choose Lexmark X4270 ,after seconds a page will open and then in
Search the KnowledgeBasePut this number and follow the steps given:

ENUS23485


good luck...

Oct 26, 2008 | Lexmark X4270 All-In-One InkJet Printer

Not finding what you are looking for?
Lexmark X4270 All-In-One InkJet Printer Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...