Question about Cobra ESD 6100 Radar Detector

Open Question

What is the power out put on the power cord for a Cobra ESD-6100?

Power cord is missing for my Cobra ESD-6100 radar detector and I need to know the power out put so that I can replace it.

Posted by on

6 Suggested Answers

Mechanic688
  • 204 Answers

SOURCE: Missing cord

Hi, I would say your best bet for a cord would be Radio Shack or a well stocked CB radio shop or possibly a large truckstop/store. Hope this helps you out,, let us know,, Mechanic

Posted on Feb 05, 2008

SOURCE: Cobra radar detector speaker replacement

I contacted Cobra via internet site and ordered the speaker. However, it has been on order for over 6 weeks and still not here. I would have figured this would be a relatively high failure item and would be stocked. Thanks for the response. ohmhead

Posted on Mar 27, 2008

  • 3 Answers

SOURCE: need a power cord

I would go to your nearest Radio Shack. Thats where I got mine.

Posted on Oct 02, 2008

  • 19 Answers

SOURCE: replace power cord

The easiest way would be to go to Radio Shack.

Posted on Jan 03, 2009

  • 134 Answers

SOURCE: cobra

It operates off of 12V negative ground.

Posted on Mar 17, 2009

  • 131 Answers

SOURCE: cant find a replacement fuse for the power cord

the fuse is located in the cigarette lighter plug, at the end you will see a silver cap and then the disk that goes over the top of it, that will turn and then you will have the front open to replace the glass fuse that is in it... to find the fuse size, after the fuse is out look at the silver ends it will have the size stamped on it... it might be a 40 amp fuse. or 20 amp. just look at the silver sides on the fuse you will find that there... hope this helps you out

Posted on Jun 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cobra xrs 979 wont turn on The light on the power cord is on (fuse is ok) but the radar detector will not turn on anymore. Any ideas? Thanks!


I have a Cobra ESD-9117 that wouldn't turn on. There was power at the plug end. I took it apart and took the power/volume button off. I used a magnifying glass and found the contact for the power must have bent from all the years of use. I bent it back and all is good again.

Oct 29, 2016 | Cobra Radar Detectors

1 Answer

Cobra ESD 9210 Radar Detector for sale


USD 75 is what other used ESD 9210s are current going for here.

Jul 19, 2012 | Cobra ESD 9210 Radar Detector

1 Answer

I need new cord power i now sure what model buy


  • For a Cobra ESD-8200 Radar Detector you can choose from a strait cord or a coiled cord. It's just your preference/ Either will work.


Regards, Tony

May 25, 2011 | Cobra ESD-8200 Radar Detector

1 Answer

My radar detector goes off everytime i accelerate. can i fix it or is it broke?


by going off do you mean alerting you or is the power turning off if it is alerting you you may have electronic interference in the car if the power is going off it may be as simple as a short in the power cord
cobra 773-889-3087 sells then for 10.00 or you can trade your old detector to them and get the next highest model at a discounted price

Apr 11, 2010 | Cobra ESD 7000 Radar Detector

1 Answer

Can u use a cell phone car charge ask the cord for the cobra 10 Band radar detector


If the amperage put out by the cell charger will run the unit then yes-be sure that the polarity of the plug is the same as the polarity of the detector if it matches up youre good to go

Jan 14, 2010 | Cobra ESD 9110 Radar Detector

1 Answer

I HAVE A COBRA RADAR DETECTOR AND HAVE TO BUY A REPLACEMENT CAR/CIGARETTE POWER CABLE.I HAVE SOURCED A COMPANY WHICH CAN SUPPLY AN 800ma OR 2000ma power.DO YOU KNOW THE POWER CONSUMPTION OF A COBRA MODEL...


I dont know the exact amp rating on the ESD9000 you could probably get away with a 1 amp fused cig plug. Using a cig plug this is basically direct to your battery. You can use any universal cig plug adapter as long as you make sure you have the polarity set correctly, usually on the Cobra radars the center is positive.

May 14, 2009 | Cobra ESD-9215 Radar Detector

2 Answers

Cobra XRS 9950 Radar Detector not powering up


At the end of the power cord for the radar detector the end screws off and there is a fuse for the radar detector itself. Check it....

If that isn't the problem post back for further help.

Thank you for choosing Fixya!
-dan

Mar 19, 2009 | Cobra ESD 6100 Radar Detector

1 Answer

Need a power cord


I would go to your nearest Radio Shack. Thats where I got mine.

Sep 25, 2008 | Cobra ESD 7000 Radar Detector

2 Answers

Need help


Check Cig Plug Fuse and also Accessory fuse in your vehicle

Jul 22, 2008 | Cobra ESD-9215 Radar Detector

1 Answer

Missing cord


Hi, I would say your best bet for a cord would be Radio Shack or a well stocked CB radio shop or possibly a large truckstop/store. Hope this helps you out,, let us know,, Mechanic

Jan 22, 2008 | Cobra ESD 6200 Radar Detector

Not finding what you are looking for?
Cobra ESD 6100 Radar Detector Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cobra Radar Detectors Experts

John Nolan

Level 2 Expert

346 Answers

Iron
Iron

Level 3 Expert

3018 Answers

ohmhead

Level 1 Expert

2 Answers

Are you a Cobra Radar Detector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...