Question about Samsung TV Remote Control

2 Answers

Remote won't work

It was working fine last night, but this morning it would not change channels or go up and down with channels. I changed batteries and then nothing on the top part worked. The programming buttons still worked during this time and the volume buttons worked. Nothing is blocking the signal in fact the remote was 8 inches away from the TV.
ANy suggestions????????? I'm going to get a battery tester and check all the batteries.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 37 Answers

You may have accidently pressed the "cable" or "vcr" button
press "tv" button as see if it does the trick

Posted on Feb 26, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi I had the same problem last night, so I took the batterys out  and left it for a Day, have just put them back and its working for the moment, hope that it keeps on working !!! good luck with yours.

Posted on Feb 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My remote won't let me channel down past a certain channel, I can type the numbers in and it will go but if I try to arrow down channels it goes about 5 channels and then starts back over where it started,...


mp_383

What channels are you able to receive? When you press the Select button on DISH remote, which light on the top of the remote lights up? The Sat button should light up when you are in satellite mode. If any other button lights up, press and release the Sat button and then try changing channels. If this doesn't work, we may need to troubleshoot with you. Please call us on 1-800-333-3474 and speak with Tech Support. I hope this helps.

Ray Calo
DISH Network

Mar 08, 2011 | DISH Network 135899 Remote Control

1 Answer

Can not change channel on my Sanyo LCD TV


I have not solved it but, when I play the dvd player it seems to make everything else work....

Feb 14, 2009 | Sanyo Televison & Video

2 Answers

Both TiVo and Vizio remote aren't working right. Has to be TV.


my remote is not responding to new battery not showing green light.

Nov 16, 2008 | Vizio L32 32 in. LCD HDTV

1 Answer

LG 42LC7D TV does not want to chg channels after 5 min of use


There are some inductors that are out of spec. LG's original SB said to replace some of these with a jumper, but it only lasted a couple months.

You need to have the Total Main Assy replaced.

Jul 28, 2008 | LG 42LC7D-UB Television

3 Answers

Power plus universal remote control codes


Try downloading this manual

http://www.remotecentral.com/cgi-bin/files/dl.cgi?file=others/mitsubishi/bd512-manual.zip&area=other

Jul 13, 2008 | Televison & Video

1 Answer

Remote problems and now FPA locked


In the worse case:
It is very possible that the remote recieve on the set has gone defective. It is also possible that there is a fault with the processor in the set, and the remote signals are not being responded to.

As for your universal remote, I don't trust them.

Did you try changing the batteries in the remote? Make sure the new ones are actualy in good condition.

Jerry G.

Jan 01, 2008 | RCA 32V420T 32" TV

Not finding what you are looking for?
Samsung TV Remote Control Logo

881 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72601 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...