Question about iLO 3200 32 in. LCD Television

3 Answers

TV won't turn on even though it starts green, then goes off

My tv flashes green whenever I try to turn it on, but then light goes out and nothing happens. Dosen't matter whether I use remote or not. Started having trouble a couple of weeks ago with turn on: TV came on with sound first, then 2-3 minutes later, had picture. Now nothing. Help! TV only two to three years old!

Posted by on

  • 4 more comments 
  • Anonymous Feb 21, 2009

    same problem here and it's two years old

  • Anonymous Feb 28, 2009

    I Have the same problem turning the TV on and then nothing happens. Started doing the unplug and re-plug that worked for awhile and then Bam that also stop working.Now i have a larg nice looking 32 in blamk picture frame.

  • khammock Mar 02, 2009

    About the same age - same problem - high pitched noise with green light, comes on then shuts itself off.

  • shawine Mar 05, 2009

    It sounds like we all have a similar problem. My tv is only a year old and wal mart can not help me.

  • Anonymous Mar 10, 2009

    Same problem here, it started a few weeka ago, it would come on and all you had was sound no picture for about 2 to 3 minutes. Then just the other day it would turn on and then off. Is just over 2 years old.

  • Anonymous Mar 15, 2009

    won't come on at all.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have same problem. What I do now is take the back off and leave it off, I put a hair dryer on the power supply board for 3-5 minutes. Comes on every time. I paid $850 for this tv from walmart and will never buy from them or ILO. It is Junk

Posted on Mar 13, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Although my tv still does the "turn green and turn off" thing, I simply unplugged and repluggd the tv. After I did that, I pushed the "ON" button on the tv itself, unplugging and replugging the tv until it finally came on. I think the "instant warm-up" switch is going out.

Posted on Feb 19, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,267 Answers

Symptoms of a Defective or dying Power supplies on LCD TVs.
1. Light(s) on the front panel are behaving not normal example, blinking, amber color or not steady, fainting, etc.
2. TV not turning ON properly.
3. TV turns OFF by itself.
4. Needs to be unplug to many times to make it work.
5. Humming or high pitch noise heard through speakers or at the back of the TV.

I repair these power supplies. Write to jah2mil@hotmail.com if you require further assistance

Posted on Mar 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My sony wega kf-50E200A tv keeps turning off. during each cycle the green light blinks 42 times and the tv comes on again for about 3 minutes and it happens all over again


More than likely the power supply is defective, but without testing and the repair manual that is just a guess, you make the decision to replace or repair the TV.

Jan 07, 2017 | Sony KF-50E200A TV Lamp with Housing

1 Answer

Sharp lcd tv. Grn lite flashing, reset by unplug, vol + ch - , plug in. Tv came back on, after few mins screen goes blk, have sound. turn off and on picture back for few minutes, goes blk, snd ok.


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://electro-medical.blogspot.com/

Jan 07, 2017 | Sharp Televison & Video

1 Answer

Tv will not turn on, orange light flashing


Could be an open internal fuse or power supply failure

Jan 07, 2017 | Televison & Video

2 Answers

I have sound but no picture on my tv


This is a popular question. Most of the time you either need to make sure all connections are not loose or just need to turn off your tv and receiver and unplug. Wait for 1 minute then reboot.
I recommend this short video as it walks you through some diagnostics for other possible problems.
Repair TV With Sound But No Picture

Nov 24, 2015 | Luxor Televison & Video

1 Answer

The color on my TV is all pink. I have tried a hard reset but it didn't help.


Your TV has lost a GREEN color from a basic color palette (Red-Green-Blue). It is often caused by:
- damaged LCD cable (which connects the display with a signal board inside the TV),
- damaged video signal cable (ex. SCART, HDMI, VGA),
- damaged video processor (on the signal board).
I can't give you a more accurate answer, because I don't know what is your TV mark and model and, in what situations you have the problem.

Jan 19, 2015 | Televison & Video

1 Answer

Sony bravia shuts off


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

Aug 30, 2014 | Televison & Video

1 Answer

No Video Or Sound - Stand By Light Flashes 5 Times


If the tv was made before December 2008, there is a capacitor settlement from a class action lawsuit by Samsung. Supposedly (at no charge) they will send a repairman to replace the capacitors.

Nov 27, 2013 | Televison & Video

1 Answer

Would like to know the codes for a LG tv, Sony tv, and a TOSHIBA DVD ?


How to Program


Remotes With SET Button
1. Choose and press a device key i.e TV. LED will flash once.
2. Press "SET" Hold until the LED Lights up.
3. Enter the 4-digit Device code (refer code list).
4. The LED will flash once as each number is programmed at the end of the 4 digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process. If the first code does not work then repeat the process with the next.
5. Important - Some brands use other manufacturers to make their devices if the codes available do not work the try the MAGIC search function.


Remotes Without SET Button
1. Choose and press a device key i.e TV. LED will flash once.
2. Press and hold BOTH the CHANNEL UP AND VOLUME DOWN button until the LED Lights up.
3. Enter the 4-digit Device code (refer code list).
4. The LED will flash once as each number is programmed, at the end of the 4th digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process. If the first code does not work then repeat the process with the next.
5. Important - Some brands use other manufacturers to make their devices if the codes available do not work the try the MAGIC search function.


MAGIC SEARCH FUNCTION
1. The magic search function enables you to scroll through the entire code list one by one by pushing the on/off button. Each time you push the on/off button the remote automatically switches to the next code in the list and sends a signal to the device you have chosen.
2. Choose and press a device key i.e TV. LED will flash once.
3. Press and hold the SET button or if no SET button then hold BOTH the CHANNEL UP AND VOLUME DOWN button until the LED Lights up.
4. Enter the 4-digit Device code (refer MAGIC list) i.e TV is 0001.
5. The LED will flash once as each number is programmed at the end of the 4 digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process.
6. Start scrolling by pushing the ON/OFF button as soon as your TV or Chosen device turns OFF lock the code in by pushing the DEVICE key again.

Mar 27, 2013 | Televison & Video

1 Answer

I can't get my Comcast remote control to sync up with this sylvania 32in HD tv. I tried every code in the Comcast DVR manual under sylvania tv's and nothing, I would love a fix to this problem.


the tv is likely to be generic in nature i.e. parts used by many manufacturers. if you knew what tv builder actually designed it you could find the code. does the remote have a search feature if so use it, it should find something that operates most tv functions eventually

Mar 09, 2013 | Televison & Video

1 Answer

URC-22B doesn't work with my BEKO tv.


Check with this method. Manually turn on your tv.
Then push and hold the code saerch button until the light stays lighted release the button.
Push and release the device button you want to set TV.
Now you got to push and release the ON/OFF button until your device turn off when your device turn off stop and push and release the enter button for storage the code.
Warning: You may push and release the ON/ OFF button for almost 200 times.
Good luck.














.

Jun 12, 2009 | Televison & Video

Not finding what you are looking for?
iLO 3200 32 in. LCD Television Logo

532 people viewed this question

Ask a Question

Usually answered in minutes!

Top iLO Televison & Video Experts

AFcityboy

Level 1 Expert

4 Answers

Radames Pagan
Radames Pagan

Level 3 Expert

196 Answers

loony2ns

Level 1 Expert

9 Answers

Are you an iLO Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...