Question about Ryobi 15" Electric Factory Reconditioned Trimmer (ZRRY41002) - Factory Reconditioned

Open Question

Ryobi 30cc plt 3043ye cord retracts but wont engage

I added a cultivator,then when i put the snipper back on the cord seems to retract but will not engage, any ideas or help,

thanx

Posted by on

5 Suggested Answers

  • 13 Answers

SOURCE: Ryobi Line trimmer

watch you tube "how repair a pull starter" there lots of videos on there .. you can watch them again and a again

Posted on Oct 06, 2011

  • 1 Answer

SOURCE: Ryobi petrol 30cc Trimmer plt 3043 ye

Hi! With the red know in one hand, push the spool down with th other to the female threaded shaft comes to the top. Then, hold the red know in the other hand with your index finger on the bolt in the middle, holding it down. Now start threading it onto the female shaft COUNTERCLOCKWISE! Once you get it, it get's easier. Good Luck!~Frank~

Posted on Jun 16, 2008

evwood
  • 50 Answers

SOURCE: pretensioning starter cord on ryobi whipper snipper.

This was answered in a previous solution

Posted on Jan 03, 2009

  • 1 Answer

SOURCE: Ryobi Whipper Snipper plt 3043YE. change clutch plates

Waiting for some information, current had no reply.
Ryoby sent me a line diagram, would be gratefull for further information please.

Cheers

Justin

Posted on May 19, 2009

  • 5 Answers

SOURCE: I want to access the pull cord

This appears to be a model only sold in the UK but it looks like the standard, Ryobi,Homelite,Toro, trimmers we have in the states. You have to remove the 4 screws that hold the motor to the shaft to access the recoil starter. Once apart it will become evident how to remove the starter parts. Hope this helps.

Posted on Sep 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Starting Pull Cord


You didn't list the model but those little rewinds are typically built very similarly.
It may sound a little crazy but it works, take the unit to a power washer such as a car wash and blow out the gook in the rewind with lots of hot soapy water and then rinse. Then using a probe or small screwdriver get the rewind unstuck. If it retracts you’re good to go if not let me know as you may have a broken piece in there and I'll need the model to know what to do next.

Jun 04, 2010 | Ryobi 15" Electric Factory Reconditioned...

1 Answer

Trying to replace pull cord on ryobi cs30. How do


how do I repair/replace the pull cord on my Ryobi CS30?

May 22, 2010 | Ryobi Garden

1 Answer

I want to access the pull cord reel on a Ryobi trimmer PLT 3043YE


This appears to be a model only sold in the UK but it looks like the standard, Ryobi,Homelite,Toro, trimmers we have in the states. You have to remove the 4 screws that hold the motor to the shaft to access the recoil starter. Once apart it will become evident how to remove the starter parts. Hope this helps.

Sep 16, 2009 | Ryobi Garden

1 Answer

Cord not retract,motro not running.


carefully take the cover off that holds the cord as soon as the cover comes off the cord will probably retract. If it doesnt find look to see where it is binding. If it does there will be 2 pieces on the fly wheel that engage the part that holds the cord. Us a brake cleaning airisol product to clean them they are probably stuck. If you want to lubricate them use a product with teflon (PTFE) in it, it doesn't attract dust. Put it back togather.

Jun 14, 2009 | Garden

1 Answer

Ryobi Whipper Snipper plt 3043YE. change clutch plates


Waiting for some information, current had no reply.
Ryoby sent me a line diagram, would be gratefull for further information please.

Cheers

Justin

May 13, 2009 | Ryobi Garden

1 Answer

How to pretension starter cord on ryobi whipper snipper


Remove the housing and pull the cord partly out. Then rewind the rest. Check to see if it retracts properly. Good Luck!

Dec 30, 2008 | Ryobi 15" Electric Factory Reconditioned...

1 Answer

Ryobi gas trimmer cord dont want to retract


The rewind mechanism is not functioning. It consists of a ratchet and spring. Examine and replace the defective part.

Sep 26, 2008 | Garden

2 Answers

Ryobi Line trimmer


you have to remove the starter housing, inside will be 2 knobs that spring out when the cord is pulled that contact the flywheel cap of the motor and rotates the crank. check if they are missing or damaged and that they ejecting when the cord is pulled. if not; replace.

Jul 24, 2008 | Ryobi 15" Electric Factory Reconditioned...

1 Answer

Ryobi petrol 30cc Trimmer plt 3043 ye


Hi! With the red know in one hand, push the spool down with th other to the female threaded shaft comes to the top. Then, hold the red know in the other hand with your index finger on the bolt in the middle, holding it down. Now start threading it onto the female shaft COUNTERCLOCKWISE! Once you get it, it get's easier. Good Luck!~Frank~

Jun 07, 2008 | Ryobi 15" Electric Factory Reconditioned...

Not finding what you are looking for?
Ryobi 15" Electric Factory Reconditioned Trimmer (ZRRY41002) - Factory Reconditioned Logo

Related Topics:

262 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ryobi Garden Experts

Jim Parker
Jim Parker

Level 3 Expert

1040 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

375 Answers

EugenesDIYDen
EugenesDIYDen

Level 3 Expert

479 Answers

Are you a Ryobi Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...