Question about Buffalo Technology WHR-G54S Wireless Router (WHR2G54S)

Open Question

How do i change my NAT connection from moderate to open

Hi, i have a Linksys Wireless-N Broadband Router and I have been having trouble changing from a moderate NAT connection to an open NAT connection for my xbox live on my xbox 360. I have enabled the UPnP and put in the port numbers in my routers configuration and yet every time I get on xbox live on my xbox 360 and test my xbox live connection it still says that I have a moderate NAT connection. PLEASE ANYBODY HELP ME FIX THIS PROBLEM, IT WOULD BE GREATLY APPRECIATED!!!! i am using a buffalo wireless router and im using an xbox350 wireless network adaptor to connect to it. my nat connection is moderate and i dont know how to change it to an open one

Posted by on

5 Suggested Answers

Coldcut
  • 1554 Answers

SOURCE: router

I use a second wireless card for just such issues.
the internal cards antenna is weak.
toshiba seem to be the worst about this to me.

Posted on Feb 04, 2008

rosener
  • 103 Answers

SOURCE: Canot connect wireless

Hi sir,

Hope this will give you an idea. Hope the wireless signal is fine when connecting to wireless router. But I pressumed there's no problem with your firewalls and basic installation procedures. And it gives me a hint that you can run using your fren wireless router. Now, check the routers name that exactly searched from Network Wireless Setup Wizard at control panel. If there's a need to configure internet connection at routers setup menu please do. Please refer also your assigned IP by your ISP, gateway, dns1 and dns2 if your connection type is Static. If it is dynamic or PPPOE and other connection type please ask assistance with your ISP for the entries.

Best regards,
Rosener Guyano

Posted on Feb 05, 2008

ayamaya
  • 143 Answers

SOURCE: Buffalo router-WYR-GR4

you need to access your router's setup page in order to get the wep key. follow the steps below

- open a web browser and type http://192.168.11.1 on the address bar. the default username is "root" and leave the password blank
- you will be prompted with your router's page, go to the wireless settings
- then go to wireless security, there you will find your wep key or the encryption that you needed to connect wirelessly

hope this'll help and just ask me if you have other concern

ciao!

Posted on Jul 18, 2008

kakee
  • 1268 Answers

SOURCE: Change NAT to open

You need to open all the ports for the xbox live. The NAT of that router model cannot be configured to open. Its just a simple NAT for internet connection.

Posted on Feb 09, 2009

Hardtack
  • 46 Answers

SOURCE: How do i change my NAT connection from moderate to open

This one is simple. Find the IP address that your Xbox is assigned by your router, then put it into the DMZ. This also goes for PS3 users who are having trouble with internet access.

Posted on Feb 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Halo 3


make sure the security settings on router is WEP-Personal. I don't know what you have for internet but Dial-up, DSL, and satellite internet will not get NAT 1.

Mar 14, 2009 | Linksys WRT54GX2 Wireless-G Broadband...

1 Answer

Switching from moderate NAT connection to an open NAT connection


yo tengo problema co el asistente de conexion del linksys

Feb 10, 2009 | Linksys WRT160N Wireless Router

1 Answer

How do i change my NAT connection from moderate to open


This one is simple. Find the IP address that your Xbox is assigned by your router, then put it into the DMZ. This also goes for PS3 users who are having trouble with internet access.

Feb 10, 2009 | Linksys WRT160N Wireless Router

2 Answers

Change NAT to open


You need to open all the ports for the xbox live. The NAT of that router model cannot be configured to open. Its just a simple NAT for internet connection.

Feb 09, 2009 | Linksys WRT160N Wireless Router

1 Answer

I dont know how to change NAT type.


since NAT has to be set on the Linksys...
you will have to use the software provided by linksys, or use a web based interface which connects to the linksys and you can do the respective changes...!!!

Jan 28, 2009 | Linksys WRT54GX2 Wireless-G Broadband...

1 Answer

Setting the NAT on x-box to open


I chated on line with someone at Linksys. They solved my problem. Thank you.

Jun 14, 2008 | Linksys WRT54GL Wireless-G 54Mbps...

3 Answers

Change NAT to open


Ok kids... all you hve to do is log in to your belkin 54g at http://192.168.2.1

Find out what ip address your xbox is using and then Click on the DMZportion of your settings on the left hand side of the page.

Enter the xbox's ip address and click the enable box.
Click apply.


Your NAT will now be OPEN!

Cheers!

Mar 24, 2008 | Linksys WRT54GL Wireless-G 54Mbps...

Not finding what you are looking for?
Buffalo Technology WHR-G54S Wireless Router (WHR2G54S) Logo

1,601 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buffalo Technology Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Prashant M
Prashant M

Level 3 Expert

2260 Answers

hellics

Level 1 Expert

45 Answers

Are you a Buffalo Technology Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...