Question about Buffalo Technology LPV2-USB-TX1 Print Server

2 Answers

I need the printer driver for my Kyocera Printer, Laser type,FS 3800N.. How to get it and save it. Please advise. Bud

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

You can also go to  Go to Downloads and USA, select your product "Legacy Printers" then your model.  Then select print drivers.  I would suggest the KX Driver.  It is the fullY Fuctional driver that has PCL 5, PCL XL(PCL 6) and KPDL(PS3) built in.  It also has some good add-ons like Print to PDF.  Hope this helps, I've been a Kyocera Tech for 11 years.

Posted on Apr 23, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 150 Answers

You can find the correct driver for your printer here:

Choose from PCL, KX, or KPDL. If you are unsure, you should probably use PCL.

Please rate, Thanks!

Posted on Feb 27, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What does a c4203 code mean?

More than likely you have a PDF Owner's manual on the Software install disk. It should have troubleshooting section to help you with this and any future issue. The software may also have a trouble shooting system.
I googled and this seems to be a possible answer:

May 14, 2015 | Kyocera Mita Ecosys FS-C5350DN - 32PPM...

1 Answer

Keep receiving message on printer screen to clean machine but no instructions how to do this. Please can you help.

exact message wording will be helpful...

check first all paper path, check especially on the rollers if no paper scraps are left on them or on the mechanism.

go to this site, select your model and download service manual, it will contain detailed procedures:

hope this will help you - do not forget to vote... :-)

Apr 08, 2015 | Kyocera Mita Ecosys FS-C5400DN - 37PPM...

1 Answer

Ip address for kyocera fs-1320d

Contact your IP Provider for the information you require

Mar 30, 2015 | Kyocera Mita Ecosys FS-1320D - 37 PPM...

1 Answer

Change ip address

You cannot change the ip address, if you are using static ip address.If it is dynamic ip address, you can change it easily by resetting the modem or switching it off and can also use Proxy server or Hide ip address software to change the ip address.
To check the ip address before and after changing, Visit the . Here you can search IP,domain host and it also includes city, country, global latitude & longitude coordinates etc.

Nov 04, 2013 | Kyocera Mita Ecosys FS-C5100DN -23 PPM...

1 Answer

How do I install a new line sensor on my HP 5500DN laser printer

restart the printer , if does not help , try to update the driver if does not , try to do reset "NVRAM "

Aug 14, 2013 | HP 5500 Color Laser Printer With Internal...

1 Answer

Cannot access Advanced page via browser on KyoceraMita FS-1118MFP

THE page might have been removed from there permanently from the database of google.
try that again ,u can have.

Apr 01, 2010 | Kyocera Mita Kyocera-Mita - NETWORK BOARD...

1 Answer

Unable to install DP G 301 For laser jet 5 printer

0.Follow the manual instructions to configure the Printer Server (tpc/ip), connection toyour local wireless LAN, etc. then, specific for Vista: 1.Vista Start Button 2.Control Panel 3.Printer 4.Add New Printer 5.Select Local Printer 6.Click on "Create new Local Port" and from the menu "Standard TCP/IP Port" 7.Click on "Next" button 8.Menu "Type" select TCP/IP and write the IP address of your Printer Server. UNSELECT "detect printer to..." then press "Next" button 9.If everithing is fine, it must find your printer server. 10.Select your driver ... that's it .... unfortunately I found some problems printing documents: it works till half page then the printer stop and I must cancel manually from the printer the job in order to reset the printer itself.... looking for solutions

Mar 16, 2009 | D-Link Print Servers

1 Answer

Problem in taking a print from Nokia 3500 using kyocera printer attached with Bluetooth adaptor

Check your Bluetooth adapter and see if it requires driver. If it requires driver then you can't just plug it in to your printer unless your printer has a built-in drivers for Bluetooth adapters.

Check if the printer supports Bluetooth adapters and make sure that your Bluetooth adapter is compatible with the printer.

Jun 25, 2008 | IOGear Bluetooth Combo Printer Adapter [...

1 Answer

Not printing to network attached printer

I have a DLink DPR-1260, and found the configuration to be challenging too. First of all, has it ever worked? If not, you may need to check your router config to ensure that they are both on the same subnet. Typically they come set to 192.168.x.x... if the router is set to, the print server is set to, and your subnet mask is set to it'll never connect. Make sure that the router and print server are configured to the same subnet... 192.168.1.x for example... and then try it. Let us know if that doesn't resolve your issue, and we'll keep working with you.

Oct 26, 2007 | D-Link DP-300U (DHDP300U) Print Server

3 Answers

Printer is offline ever

I would suggest you one option if the operating system is windows. You have to go to Start -->Control Panel --> Printers and Faxes . Then you will see your printer icon there. RIght click on that. Check whether you are having an option "Use printer Online" or "Set printer Online". If you have that option , just click on that and apply the settings and see what happens - Thank you

Oct 25, 2007 | Trendware TRENDnet TE100-P1U Print Server

Not finding what you are looking for?
Buffalo Technology LPV2-USB-TX1 Print Server Logo

Related Topics:

269 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buffalo Technology Print Servers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

old marine
old marine

Level 3 Expert

1463 Answers

Cindy Wells

Level 3 Expert

4756 Answers

Are you a Buffalo Technology Print Server Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides