Question about Canon PowerShot SD1000 Digital Camera

1 Answer

Continuous mode have the sd1000 and want to take continuous shots of ppl doing trick on snowboards want to know how to get this option to work and at wat how quickly each photo is taken

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert that has over 500 points.


    An expert whose answer got voted for 20 times.

  • Expert
  • 180 Answers

I think the frame rate is 1.3 frames per second.

How do I set Continuous Shooting?
Solution: Setting Continuous Shooting mode PowerShot SD750 and SD1000.

Continuous Shooting In this mode, the camera shoots continuously while the shutter button is held down. Recording ceases when the shutter button is released. In addition, under the following conditions, continuous shooting can occur at a consistent interval until the SD card is full*.

  • A resolution and compression combination other than continuous mode - 145.gif and 129.gif is selected.
    * If continuous shooting suddenly stops, the SD card may be full.
Continuous shooting is available in all modes except 171.gif[AUTO], stitch_assist_icon.gif[Stitch Assist], [Colcontinuous mode - colorswapdropper.gifimg src="" alt="colorswapdropper.gif" class="h_mi" />[Color Swap].
To set Continuous Shooting continuous mode - cont_icon.gifl>
  • Press the button to display cont_icon.gif.

  • Shoot the image.

    The camera will continue to record successive images while the shutter button is fully pressed. Recording will cease when the shutter button is released, the card is full or the card does not support a write speed to allow continuous shooting to continuecontinuous mode - cont_icon.gif To Cancel Continuous Shooting
    1. Press the cont_icon.gif button twice to display single_icon.gif.
    caution_a70.gifTo enhance the continuous shooting performance when you suspect the speed has dropped, you are recommended to format the SD card in the cacontinuous mode - note_icon_a70.gifFormat) after you save all its images to your computer. note_icon_a70.gif
    • The interval between shots may lengthen slightly when the camera's built-in memory fills.
    • If the flash is firing, the interval between shots will lengthen to accommodate the flash's charging requirements.

  • Posted on Feb 18, 2009


    1 Suggested Answer

    • 2 Answers

    SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

    a 6ya Expert can help you resolve that issue over the phone in a minute or two.
    Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
    click here to Talk to an Expert (only for users in the US for now) and get all the help you need.

    Posted on Jan 02, 2017


    Add Your Answer

    Uploading: 0%


    Complete. Click "Add" to insert your video. Add



    Related Questions:

    1 Answer

    My cameras power seems to work but the screen is all pur black ?? what can i do to fix this???

    I have canon power shot sd1000 camera. Every thing is o.k. except that recently the screen stays dark in picture mode and when on for taking pictures. pl let me know.

    Feb 03, 2011 | Canon PowerShot SD630 Digital ELPH / IXUS...

    1 Answer

    My canon ixus70 will not take photos,I can view past photos but it will not show image on screen or record digital image ,if I take a shot all I get is a black nothing. Janis

    Issue: How do I reset the camera to its default settings?
    Solution: Procedure for resetting the camera to its default settings PowerShot SD750 and SD1000.

    Resetting Settings to Their Default Values - PowerShot SD750 and SD1000. 1. Turn on the camera and press the <MENU> button to open the menu. 2. Using the arrowrightbutton.gifbutton, highlight the yellow setup_icon.gif(Set up) tab. sd750resetscreen.gif 3. Using the arrowdownbutton.gifbutton, select [Reset All..] and press funcseticon.gif. sd750resetscreen.gif 4. Select [OK] and press funcseticon.gif.
    • Settings cannot be reset when the camera is connected to a computer or to a printer.
    • The following cannot be reset:
      • Shooting mode
      • The [Date/Time], [Language] and [Video System] options in the setup_icon.gif(Set up) menu
      • White balance data recorded with the custom white balance function
      • Colors specified in the [Color Accent] or [Color Swap] modes of My Colors
      • Newly added My Camera settings

    Jul 28, 2010 | Canon PowerShot SD500 / IXUS 700 Digital...

    1 Answer

    With a fully charged battery, how long does the power shot sd1000 work in movie mode?

    It's not just the battery that will get better and longer results with a class 6 card or better.

    Jun 19, 2010 | Canon PowerShot SD1000 Digital Camera

    2 Answers

    My Canon Powershot SD1000 has a fully charged battery but won't turn on at all.

    Does your camera turn on when it's in playback mode? I have a similiar problem with mine. It only turns on in playback mode.

    Sep 25, 2009 | Canon PowerShot SD1000 Digital Camera

    2 Answers

    Functions are confusing...

    that function is a browsing pictures mode....its jumps from 10 to 10 ...or what ever you set it ..u can use it when you have a big amount of pictures..I mean thousands ...( its possible when you have picks about 1,5 M and have a 4 G card...and you look for a specific set of pictures...taken in a certain moment ....its kinda like a ffwd ....for the second can easy clean it with one of those cleaners for spectacles or a wet Kleenex ..and for the continuous mode you probably have the option in the seting menu ...aside with the vision mode ..and light seting ...

    Sep 04, 2009 | Canon PowerShot SD1200 IS / Digital IXUS...

    1 Answer

    Powershot SD1000 automatically shuts down in Camera mode

    In any mode that the camera will stay on, press the "Menu" button and navigate to the RESET option and try to reset the camera. See if this will get the camera to function properly.

    Jun 11, 2009 | Canon PowerShot SD1000 Digital Camera

    1 Answer

    Canon Powershot SD1000: LCD screen display

    Hopefully you resolved this already. If not, push the "DISP." button left of the MENU button. Pushing it gives you three options: black (for discreet shooting so your LCD doesn't give garner dirty looks from fellow concert goers), liveview, and liveview with info overlayed (shooting mode, ISO, etc.). Good luck!

    May 05, 2009 | Canon PowerShot SD1000 Digital Camera

    1 Answer

    Snowboarding skill level

    In Snowboarding, the skill level is divided into three types: * Newbie - from total beginner to having a few days of riding experience * Intermediate - comfortable with common riding techniques and starting to try tricks * Advanced - comfortable with riding all pistes and off slope; advanced tricks and skills"

    Dec 01, 2008 | All Star Forum Star Women's Snowboard

    2 Answers

    Flash won't work on Sony Cybershot T-70

    multi shot mode would not have flash.
    change back to single shot mode.

    Nov 06, 2008 | Sony DSC-T70 Digital Camera

    1 Answer

    Black screen, not capturing photos

    have the same problem...
    it happened about a month ago and i pressed the display button and it worked, but now that doesn't work either!

    Jul 22, 2008 | Canon PowerShot SD1000 Digital Camera

    Not finding what you are looking for?
    Canon PowerShot SD1000 Digital Camera Logo

    256 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Canon Cameras Experts


    Level 3 Expert

    102366 Answers


    Level 2 Expert

    175 Answers

    old marine
    old marine

    Level 3 Expert

    2036 Answers

    Are you a Canon Camera Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides