Question about Sony VAIO K45 Notebook

1 Answer

Black screen once system boots up i get an error message and then screen goes black

Posted by on

  • Ryan Wendell May 11, 2010

    What does this error say? System specs? Please more detail.

    -Ryan


    -please rate


×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 53 Answers

Johnslaptops.com I repair these all the time i hate to bare bad new but it a bad mother board.This is so common with sony laptops i have a stack of them with the same troubles. i just got a pcg k45 than seam to work good till you get to the starting windows screen and just shuts down.
Sony knows it has problems but they just keep selling them anyway. because it dont happen till the warranty runs out.A new mother cost about $425 for this model. Wish i could tell you something better

Posted on Feb 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

"error loading operating system" message on dell inspiron 1420 laptop


only way to bypass this is use a recovery disk to boot from and then perhaps the issue will manifest itself

otherwise, it's the dreaded re format step

May 22, 2012 | Dell Computers & Internet

1 Answer

Monitor comes up black i can see the cursor but nothing else any ideas? it boots normally but once past the boot screen its all black with just the cursor showing


Nevermind the more I thought about it, your not getting to the operating system. The PCs used to say something to the effect of 'operating system not found' after the POST if it could not find a boot device. I think that's what's happening here, you have to go into to BIOS and see if it can detect the hard drive. When the laptop boots look for a message saying 'press F1 for setup' or something along those lines... if it comes up too quick to see start hitting F1, Esc, Del keys right after the power lights comes on, BIOS is usually one of those keys. Once in BIOS look for a 'devices' type tab and search for where it reads the hard drive If there's nothing there then its your problem, and you need to get the BIOS to autodetect it. Respond if you have questions.

Jan 11, 2012 | Toshiba Satellite A215-S5818 Notebook

1 Answer

When i start up my advent 1000 laptop the screen goes black and an error message comes up (a disk read error occurred)


If you can get CHKDSK to run, it might fix the problem. Can you boot from the installation CD? Does your system have a diagnostic partition? ( It if so, it will be an option on the early boot screen)
Finally, can your remove the disk and install it in another computer then run CHKDSK /F
Hope this information will help.
Your response is very much appreciated. Thank you for using Fixya...

Sep 25, 2011 | Computers & Internet

2 Answers

Windows 7 won't bootup, has error recovery. it loads files then nothing. screen is black.


Had that problem a few times myself.
Only way I could fix was to restore back to factory condition.
As you boot, watch bottom of screen closely.
depending on system, Should need to press F2, F10, possibly F12, might even be Del.
Most likely you didn't get restore disk, or have made one.
If you do, insert disk before boot up. System should boot to DvD.
Don't forget once restored to update.
Hope this helps
Don

Jun 22, 2011 | Computers & Internet

1 Answer

On start up the system boots and windows loads but wont finish. The message ''Insufficient system resources exist to complete API.'' it comes in a box headed Isass.exe- System Error Any help would be...


When windows tries to fire up, does it ask you whether to boot up in safe mode or normal (would be a black and white MS DOS screen with no mouse functions)? If not, you need to reboot your computer and go into boot options. There should be a little comment line in one corner of the screen before windows loads that says something like F2 Setup F12 Boot Menu. Do you get that once it has begun trying to execute windows?

97-KMAG

Dec 15, 2010 | Acer Aspire One PC Notebook

1 Answer

Upon boot up, it doesn't complete, screen goes black, then message firmware error appears.


  • Do an NVRAM reset. Press and hold 6, 7, 8 upon boot up.
  • Boot up printer without network cable, fax line and options, see if error comes up.
  • Get the exact error message.

If problem continues, printer will probably require service. Contact Lexmark technical support(under warranty) or local authorized service provider for professional assistance.

Sep 22, 2010 | Lexmark X658DE All-In-One Laser Printer

1 Answer

Wont boot up says a disk read error occurred. press ctrl alt del to restart. i do this and the same message comes up


Hello,

your operating system files is corrupt, that's why your computer is showing you that message.Your computer cannot but except the it is repaired.

To repair your windows, you will need the Cd that came with your computer, that's what you will be needing in other to repair your system.

Also, you can still boot your system by booting in safe mode. To boot in safe mode, restart your computer and immediately, keep pressing "F8" on your keyboard, a black screen will come up and you will see a booting option, scroll to safe mode and press enter.

Once your system boots up in safe mode, you can restart your system and the problem might be solved.

Take care.

Jun 01, 2010 | Toshiba Satellite A135-S2386 Notebook

3 Answers

My computer wont start up


First try pressing F2 at start up to see if you can get to setup. Also pressing F12 may get you a boot menu. If cd is already set as first boot you may get a chance to boot from a Windows cd. The idea here is to get to a minimal Windows configuration like setup or safe mode (F8) to see if this is a hardware or operating system fault. Two common issues with eMachines are power supply problems where repetitive reboots can actually fry the motherboard or if the PC has a few years use the CMOS battery. Steve Medley

Oct 30, 2008 | E-Machines eMachines Desktop PC

Not finding what you are looking for?
Sony VAIO K45 Notebook Logo

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Computer Links

Level 3 Expert

2385 Answers

Are you a Sony Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...