I cannot see anything on the screen but if I click for the picture it clicks and take the picture but cannot see anything on the screen. Just black screen with few small icons

GO SETTING TAB AND FIND OPTION SET DEFAULT MANUFACTURING SETTING AND TRY

1) Turn on your computer. Right away there will be a black screen. You can restore factory settings without a CD, too. This will reset your BIOS.

2) Press F1 when the black screen appears; you will enter the setup configuration mode. You will be presented with a menu.

3) Select Restore Factory Defaults. Your computer will do all the work for you. As with the CD, this process may take several hours.

OR

As soon as your computer is turning on press the F10 key and it will take you to the system recovery screen, click on the advanced option and click Destructive recovery and click next. WARNING: before doing this backup anything on your computer you want to keep pictures,videos,music etc.. this will delete everything that did not come pre-loaded from the factory, so if you have pictures of Aunt Fae's Class reunion you should probably back those up if you wanna keep them.
To keep your PC fresh and optimize it to best performance use system utility software RegInOut

Windows 7 & Vista:
Right Click on your desktop and go to Personalization. Click on Desktop Background at the Bottom of the screen. On the Picture Position drop down menu, click Stretch and save changes.

Windows XP:
Right Click on the Desktop and click Properties. Go to the Desktop Tab. Select stretch from the drop down menu. Apply.

Please Rate my answer. Thank you.

Hello kailuajacqui:
It sounds like someone has turned on the picture in picture option on your Television. The reason it is a black screen is because it is not setup on a station or other input in order for you to see anything.
Check your manual for how to turn off your PIP (Picture in Picture) option. Or just hit the PIP button on your remote control.

If this helped just click the thumbs up.
Your FixYa team member, Peter N.

Iris or Aperture not working its all time off so that you can not see through camera.You need to change Iris cable.

Yes, its known problem of CCD Imager in your Canon A75 camera and Canon will repair it free of cost.
Click Canon CCD Imager Advisory for details.

CCD malfunction, common with Sony manufactured CCD chips. You are in luck, its a free repair regardless of warranty date.
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=223&modelid=8044#

The camera is fine. Since it is an Single Lens Reflex (SLR), it is not possible to use the LCD screen to compose your pictures. Canon answers that here: CanonUSA


Click on the frequently asked questions

Did you know of anything you did to physically crack the screen?
As for the clicking-- that is the hard drive. It is either dead or stuck. you may want to try to "unstick" it the Risky way. To do this, Place a stack of paper on a table, and smack the ipod against it. Obviously you should do it to the back to avoid breaking the click wheel or screen (even though your screen may be broken already.)
As for the "very low battery" thing, just plug it into a computer or Ac adapter and let it sit. It will eventually charge.

Try plugging a seperate monitor to the computer if it goes then your problem is a stuffed LCD.