Hello about 2 weeks ago I think the blue projection lamp on the tv blew and now the picture is all red and green. I would like a quote on how much it would be to service the TV since I can not carry it into the store and is it worth it to fix such a great but old TV. I got it as a gift from a friend who had the tube done back in 2004. No other problem otherwise than green people are a pain to watch. Magnavox PTV-382-A001
An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert who has written 50 answers of more than 400 characters.
An expert whose answer got voted for 20 times.
Re: Picture is all Green or Red
Its probably a combination of worn CRTs (picture tubes) and contaminated coolant chambers located between the CRT face and its lens. The repair cost as well as the availability of parts make this a poor candidate for repairs. It could easily cost over $1000 to do this repair.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
IF IT IS HOOKED UP WITH COMPONENT CABLES (GREEN, RED, AND BLUE) FOR PICTURE AND RED AND WHITE FOR AUDIO, MOST LIKELY THE RED ONE IS NOT SEATED PROPERLY, CHECK BOTH ENDS THE ONE CONNECTED TO THE TV AND THE ONE CONNECTED TO WHATEVER THE SOURCE IS ( SATELLITE BOX, CABLE BOX ETC.
Picture Mode: Expert1
Fresh Contrast: Off
Noise Reduction: Medium
Black Level: Low
Real Cinema: On
Color Standard: HD (N/A w/HDMI)
White Balance: Warm
**Method: 10-Point IRE
Color Management System
Red Color: 0
Red Tint: 0
Green Color: 0
Green Tint: -15
Blue Color: 0
Blue Tint: 11
Yellow Color: 15
Yellow Tint: 2
Cyan Color: -15
Cyan Tint: 0
Magenta Color: 0
Magenta Tint: -1
lg70 nice tv excellent processor just to bad there is no intensity control on color management oh well still better than what the three s are pushing block out the hype lg will be number 1 in a few years haters are starting to come around and well leds coming,
p.s. i dont work for lg just tired of losers bashing stuff because they dont own it. im isf certified those settings are right on the money straighter than a ruler
the color which you see has problem i think you might be seeing white slanting lines also with this. it mainly due to
1 supply to green video supply
2 loose cuntact in g.video section
3 green tr. defective
4 ckt from ic to green input is defective
5 chroma ic defective if supply is ok.
Most projection TVs have an option to refocus. For example, my Sony rear projection TV has a button on the front for focusing the lamps. Try finding this button or option in the menus with your remote.
Projection TVs actually use three lamps, one red, one green and one blue. These need to line up exactly in order to form a good picture, and when they come out of focus, you see the edges which sometimes has the effect of a 3D image when you aren't wearing 3D glasses.
Hope this helps!
there is currently a bug with HDMI when you try to run it from comcast box to a tv or through something to a tv. its thinking that you're trying to copy something...but in actuallity you're not. comcast knows of this problem and they are trying to make new boxes to fix it.
y,pb,pr are component cables. the red/blue/green cables that are digital to analog to digital, but will still give you a great picture.
if your using a HDMI cable and have comcast service call comcast and have them bring you a new red/blue/green cable. They may play stupid but don't let them leave without changing cables. -->
Sounds like you have two differant problems. A red drive or red picture tube is bad and the conbvergence IC's are bad. To test the red drive disconnect the green picture tube socket BUT MAKE SURE THE SET IS UNPLUGGED!!Then remove the red socket and move over to the green tube. Then turn on the set. If you get the same out of the green then you have a drive problem that needs to be trouble shot for a bad componet. If you do get a picture with the red connected to the green then the red tube is shot. If you know how to read a schematic, get one and then you should have no problem troubleshooting the red drive and the convergence problem. If you dont then there is no easy or quick fix as this is a solid state set and there are no user replaceable parts inside this.,. Your going to need, for safetys sake, call in a trained tech to assist you with this repair