Question about Panasonic TH-42PZ700U 42 in. Plasma Television
I'VE GOT A PANASONIC TH-42PV7AZ PLASMA. AFTER 30MINS THE PICTURE CUTTS OFF AND AUDIO STAYS ON.ANY SOLUTON TO THAT...
I had the same issue twice with a TH 42PWD5. turns out it was my UPS that was killing the switching power supply. Warranty covered it but when I removed the UPS not a single issue in 3 years.
Posted on Jul 01, 2008
The six blinks indicates that an internal fan is either bad ot blocked by dust or debris, You should be able to look in the back of the unit and see some cooling fans. Chances are one on them is not turning and will need to be replaced
Posted on Nov 26, 2008
I had this problem in 2007 / 2008 here is what happened to me.
Jan 09, 2008 - I also have brought the unit to the authorized Panasonic repair facility and the problem is a failure in the P-board which is the power supply board. The P-board needs to be replaced. The repair will cost $475 plus tax. $250 is for labor. The unit was nop more than two months out of warranty. This does not speak well for Panasonic. I have been researching the problem and it looks like this has happened to many of the Panasonic plasma TVs.
Jun 14, 2008 - As an update to my problem with the failed P board. Contacted Panasonic Service and talked to a customer service representative. I told them how I have purchased many Panasonic products and how unhappy I was with the failure of the product. They proposed paying the labor cost of $250 and I would pay for the part. I just hope it does not happen again.
Posted on Oct 14, 2009
Thanks for using FixYa.These kind of issues in plasma usually happens due to bad cap on any of the boards inside. However, to check what has gone bad you’ll have to open the back of the unit you’ll need to check bulged/swollen capacitors on power supply board. As the unit won’t show anything for a long time so it means that it is the power board which is causing this issue. These issues usually happens due to overheating in plasma TVs after sometime, as these sets are very hard working device and produces a lot of heat.Please do accept the solution if the issue is resolved or post a comment for further assistance.
Posted on Jun 04, 2010
The power supply board of the television is dead, u know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.
I hope this will help in solving the problem....
Posted on Aug 01, 2011
Tips for a great answer:
Aug 29, 2016 | Panasonic Flat Panel Televisions
Dec 07, 2015 | Panasonic Viera Th-50px60u 50" Plasma...
Aug 14, 2012 | Panasonic Flat Panel Televisions
Jun 03, 2011 | Panasonic Viera TH-50PX80U Plasma TV
Apr 08, 2011 | Flat Panel Televisions
May 20, 2010 | Panasonic Viera TH-50PZ80U Plasma TV
Oct 16, 2009 | Panasonic Viera TH-50PX80U Plasma TV
Jan 03, 2009 | Panasonic Viera TH-50PZ85U Plasma TV
Nov 26, 2008 | Panasonic TH-42PHW5 Television
Sep 29, 2016 | Panasonic TH-42PZ700U 42 in. Plasma...
87 people viewed this question
Usually answered in minutes!