Re: 2002 Landcrusier 6 CD changer - CD's all skip at some...
HI.. CD CLEANERS DONT WORK....IF YOU HAVE THE TIME.. REMOVE THE WHOLE UNIT OUT..AND CLEAN THE LASER...(Q-TIP,CLEANER)IF YOU THINK IT MAY JUST BE A DIRTY LASER IT'S SOMETHING TO TRY.. BEFORE GETTING A NEW ONE ..WITH OUT LOOKING AT IT IS HARD TO SAY.. CHECK ALL CONNECTIONS ALSO.. GOOD LUCK
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There are two ways either the 90* or the 180*. If your having problems like skipping I'd suggest finding a place at the center of the car where there is less shock for the unit, like under your seat. I know changers have this 6 seconds or more memory so in case it skips, the first 6 sec ahead of the song is stored and play it to avoid the skip.
Had the same problem!! Found the solution here under "Wont Play" question. Push that cd chngr magazine (holder) all the way into the unit and tap with a blunt object( Dont tap too hard,it's plastic!!) screw driver worked for me! Push the eject button and you'll hear the unit working! Pop it in and out and it seemed to unfreeze whatever was frozen!! It finally loaded a cd and started playing again. I checked all 6 and they were okay!!
cds skip irrespective of their positions as the reading lens is the same for all.
you can do the following
1)this seems to be a SERVICING problem with dust playing the spoilsport.
2)buy a new disc (scratchless) , play it in all positions and com pare.
if it skips in all positions, call an electronic engineer who will replace /repair the delay circuit.