An expert who has achieved level 2 by getting 100 points
An expert who has answered 20 questions.
An expert that has over 10 points.
An expert whose answer got voted for 2 times.
Re: stereo will not save time or set stations. not
Sounds like a very common power wire issue. if not connected to the cigarette lighter or other continous power source when the car shuts off all memory will be lost, ie... audio settings, station memory, clock memory
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You need to Check the Wiring Harness from the Stereo. There is a Constant Power Memory Wire (Should be Yellow or Orange). This needs to be Connected to the Cigarette Lighter Power Wire for Constant Power Memory. Please Rate My Response! Thanks!
it sounds like your hot wire and memory wire are crossed you need to place your constant +12v wire to a source which is always hot and your memory wire to your ignition when you turn on your car it all works fine
Hi... your stereo has 2 power wires. Typically One is yellow and the other is red. Both should have power with the key on. Only one should have power with the key off..
the most common causes for what you are describing are either no constant power to the radio on one of the wires or you have the red and yelow wires switched around...
You have two "hot" wires going to the radio. One is the main B+ power and the other is for the "mem" function which keeps clock time and radio station presets in memory. Make sure that you have 12 volts to the memory wire (blown fuse?) If you do then you may have a problem that requires a trip to your local repair guy. Do you loose your preset stations when you turn off your car and leave the face in place (wait several minutes before turning car ignition back on)? If that is so, then you most likley don't have B+ to your memory wire. Good luck.