An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 500 times.
Re: I own insignia 27" lcd input vedio keep changing none...
Check to see that none of you manual buttons are sticking or stuck, especially INPUT !
If none are stuck and your set is still under warranty please return it.
If not under warranty I would suggest taking to a local service center that is familiar with Insignia.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Did you try "Input , 2,5,8,0" ? May I know what exactly is the problem?
Caution:Be advised that the service menu is to be accessed only by trained professionals. Keep a notepad handy. If you accidentally change some setting then pen it down go back and change it again. Pen down the values of anything that you may wanna change. Be very careful.
I would check if you have selected the correct tv input on you remote. the shadow movement you see may be bleeding over from another input. on your TV remote you will see "input", keep clicking it, delaying a little each time, until you get to the correct input you are connected to.
Both power supplies are supplying the same voltages to the circuits but in order to use the one from the NS-27LCD 27" you will need to change the wiring configurations to make it work for the LCT2715..
I could repair the power supply from the LCT2715 for under $90.00 including parts, labor and shipping it back to you.
Let me know if you require further assistance.
this to happened to me with my insignia 27", I stumbled on the fix by accident...first unplug the tv and wait for 10 minutes, next just press the power button for 10 to 15 seconds and then put the plug back in and power it on (keep pressing the power button without releasing til it is on) then you should be able to use the menu and all other buttons manually....you may have to repeat this again.
Mine is doing the same thing. I have a 2 year old RCA 27" and I was told to do a "hard reset" I am trying it right now. All you have to do is unplug the power cord to the TV for 4 hours. See if that will help.