Question about Epson Stylus D92 InkJet Photo Printer

1 Answer

Epson D92 replacement cartridge problem.

I have an Epson Stylus D92 printer. All has been fine until last week when I replaced the yellow cartridge. When I installed it, I got a message to the effect that it is not a genuine Epson cartridge and now my printer will not work. I can assure you that the cartridge IS a genuine Epson part and was purchased as part of a multipack, of which it was the last one. Typical! Neither Epson or the retailer wants to know because of a lack of receipt. Who keeps the receipt months after first opening a multipack??

I have traced the problem to the chip on the cartridge. I deduce this by replacing the new cartridge with the old one where it's presence is acknowledged by a message saying that "the cartridge is spent".

Is there any way the chip recognition can be disengaged or that I can at least get to use my printer.

Your help is appreciated.

Ray

Posted by on

  • Anonymous Mar 28, 2009

    i cant get to old cartridge to replsce it

  • Anonymous Apr 12, 2009

    it says replace cartridge even when i put a new one in!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 20 Answers

You can buy an epson chip resetter. i think they 7pin chips .try ebay about a fiver.it should reset the chips.the cart that is empty use your restetter on that and put that chip on the one that doesnt work.should be ok then.resetter led nornally goes green if chip is reset.ink level goes up to full.when carts show empty reset and you should be able to keep printing a few more pages.check chip contacts are clean no dirt etc.try resetter on non working cart light should go green.hope this helps

Posted on Jun 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change the in on my older epson stylus photo


Hi,

Old Epson printer has an ink button usually located on the front panel, it will look like a tear drop. Press and release the button and the cartridge holder should go to a position where you can replace the Ink. You may need to press and release the button several times since Epson has a feature of detecting which ink is empty. Hope this helps.

Basti

Sep 16, 2010 | Epson Stylus D92 InkJet Photo Printer

2 Answers

How do i put new ink cartridges into epson d92


Hi Freind You Can go to the link I am pasting which will guide you to change your Ink Cartridges
http://support.epson-europe.com/onlineguides/en/d92/html/ink_4.htm

FTB

Nov 22, 2009 | Epson Stylus D92 InkJet Photo Printer

1 Answer

Epson Stylus shows out of ink with full cartridge


it is the problem your printer head change it and then solve

Jul 13, 2009 | Office Equipment & Supplies

1 Answer

Cartridge holder won't move when i press button to change ink


Hi, it's not ready for a replacement cartridge yet, the printer is only LOW on ink not OUT of ink. continue to use the printer until the flashing red light remains on solidly, then the head will move to the replace cartridge poswition when you press the button.

Feb 12, 2009 | Epson Stylus Multifunction Inkjet Printer/...

1 Answer

D92 inkject purchased last week in PC world ex display


You are correct ! Been there and done that ! mine is in the back garage collecting dust, I ended up paying almost $100 to replace cartridges only because the black was used up....Save yourself the $$ and replace the unit.
I have placed another "Epson" Printer in same place !
As the Print Tube falls off behind the carriage and it constantly had to be reconnected, It had got to the point of being a Headache ! I had purchased both units w/ 2 P.C combos at
"BestBuy" amagine that ! 'Bestbuy' means we have things
most department stores don't have ! I tried to explain the problems with the combination of the 2 pc bundled Printer's and I just got passed along until "Manager" was able to help ! So once again I explained to the Manager "Next Teenager" what was going on
He wanted me to bring in the complete "Bundle" PC and all !!
I finally had my fill and left, I will never buy anything there again..
But end result was that Epson is just as the Co. that represent it..
RJ

Nov 23, 2008 | Epson Stylus C46 InkJet Printer

1 Answer

Epson D92


Did you make sure to peel off the thin plastic band over the supply hole on the new cartridge?

Nov 22, 2007 | Epson Stylus Photo R320 InkJet Printer

Not finding what you are looking for?
Epson Stylus D92 InkJet Photo Printer Logo

832 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Michel Smith

Level 3 Expert

1218 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...