Question about Kenmore Elite 45986 Front Load Washer

1 Answer

Kenmore Elite 45872 won't spin fast enough on any spin setting

Clothes are wet, have tried Rinse and Spin cycle only as well as running through the entire normal cycle a second time. Seems to spin but is slow...

Posted by on

  • Anonymous Feb 18, 2009

    Kenmore Elite HE3: Clothes are too wet when done, doesn't seem to be spinning fast enough

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 121 Answers

Check belt and voltage and try spin with empty machine

Posted on Feb 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool Calypso Washer Mdl#30942 gets stuck during rinse cycle. Machine runs, then stops, but does not rinse completely. Last 35-38 min cycle is problematic. What is wrong and how to fix it?


It's hard to tell by your description of the problem, but it sounds like it could be the timer If it's not running while in spin mode, or as simple as a belt if it's running and not spinning fast enough.

Nov 28, 2014 | Whirlpool Calypso GVW9959K Top Load Washer

2 Answers

Kenmore elite model 11027052602 clothes wet after spinning cycle why


You might have a restriction in the outlet hose. Worse, you might have a bad pump.
It is easy to check for the constriction. Pour water into the tub, set the timer for the spin cycle and watch how strong/fast the water leaves the hose. Check for water beneath the tub.

Oct 07, 2014 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Have a quiet pak4 kenmore elite. the spin cycle seems to not wring out the clothes well. In some cases, the items are dripping wet. I tried running an empty cycle, (rinse and spin setting), and it seem to...


Try this: remove the front lower acces panel(below the door going acroos the lower portion of the washer)
by removeing the attaching screws and pull off, then inside you will see a cylinder shaped unit with a cap with a twist handle on it,this is the filter pump, unscrew the cap to remove the trap and clean out completely, there will be some water in it when you open it so have a towel ready to sop up the water,reassemble everything and try a load of clothes, this will fix your problem. Good luck !

Jan 12, 2010 | Kenmore Elite 45986 Front Load Washer

1 Answer

Kenmore Elite Top Load..Rinse water keeps running in Spin Cycle. Clothes are soaking wet when spin cylce is complete


the fill valve is an electric magnet valve and sounds like it is stuck unplug machine disconnect water lines plug in and when u turn on does it click, if yes then unplug try to slide a long qtip in and if it goes in replace valve

Jul 06, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

Kenmore Elite Washer 110.24992300 spin problems


The pressure switch is mis-reporting the water level to the ECU.

Test/replace the pressure switch.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

May 29, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Wet clothes at end of spin cycle


sounds like your transmission is not working properly. check your warranty information. (should be in your owners manual) many of the whirlpool made top loaders came with a 5 year warranty on the transmission/gear case

Dec 29, 2008 | Kenmore 22422 Top Load Washer

1 Answer

Series 70 kenmore elite washing machine


If it goes through the complete cycle o.k. except for the slow spin then the motor itself needs to be checked.

Mar 20, 2008 | Kenmore 24622 Top Load Washer

1 Answer

Kenmore front load wet clothes


Before going further it is important to determine if the machine is reaching full spin. Make sure the unit is set to MAX extract and watch the inner tub. The tub should be spin really fast (1000 rpm's or better) during the final spin. If not you have lost one of the phases on the motor.

Jan 08, 2008 | Kenmore Elite 45986 Front Load Washer

1 Answer

Broken washer/dryer


This sounds like a motor control board is faulty. Please load a couple of towels in the machine run it. Watch the machine as it goes through its' cycles.

1. Do the towels tumble when the machine is washing ?
2. When it begins to spin, does it spin one way at a fast pace or does it spin one way and then the other ?

Answering these two questions will help in troubleshooting your problem.

Jan 07, 2008 | Kenmore Elite 45986 Front Load Washer

Not finding what you are looking for?
Kenmore Elite 45986 Front Load Washer Logo

Related Topics:

577 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Ron Lankford

Level 3 Expert

5386 Answers

Archaeology
Archaeology

Level 3 Expert

662 Answers

reliableservice

Level 2 Expert

313 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...