Question about Dell M992 19" CRT Monitor

1 Answer

Monitor shuts off

Hey guys, I have a DELL M992 19" CRT. Recently, my monitor shut off and when I turn it back on, the screen stays black. I disconnected everything for a few hours and it turned back on for a night. Next day, the same problem occurred and now it shuts off every half an hour or so. I'm guessing something is burnt out inside the monitor. Does anyone have a clue as to what the problem could be or what needs to be replaced inside the monitor? And would it be possible for a guy like me who has never opened a monitor to fix the problem myself or would I need to take it to a repair shop? And last but not least, what could be the expenses? Thanks for all your help.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,692 Answers

The labor rate in the midwest where I live is $50 just to look at it. Unless you have electronic experience and test equiptment, I do not believe you wil be ableo to service it yourself.Usually cheeper just to buy another replacement one. 

Posted on Feb 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Problem with monitor


Since the monitor is working normally other than turn off, I suggest plugging it into a power bar with switch. The pad switch is probably defective in the monitor.

Mar 11, 2012 | Dell Computer Monitors

1 Answer

E228WFP display disappears Posted by


disconnect all the cable from the monitor except the power cable .
see if you see any test screen and keep it on ,if the test screen blacks out you monitor is bad ,better buy a new one as usually repairs cud be expensive

Apr 17, 2010 | Dell E228WFP LCD Monitor

1 Answer

M1991 screen stays black, little light is yellow


The fault is a back-light problem and the fault could be a faulty inverter board or a faulty CCFL lamp.
For service, parts and DIY info check out LCD Parts WEB site, please click on this link :-
www.lcdparts.net

Mar 15, 2010 | Dell Computer Monitors

1 Answer

Dell Computer Monitor - Black Screen


If it worked on a computer at the IT person, it is most likely a faulty graphics card in your computer. You may want to get that checked out.

Please vote if this helps.
nLinked
Computer Support Services

Jun 08, 2009 | Dell E193FP 19" LCD Monitor

1 Answer

Monitor flashes on then goes black.


I think you have the display shut off. the button on the bottom left will shut screen off. It will come on for a few seconds if you touch the screen, but will shut off again. just push the display button again and it should stay on.

Apr 02, 2009 | ViewSonic OptiQuest Monitor

2 Answers

Starlogic 20 inch widescreen monitor screen keeps going black


This is probably a back light problem. Take a bright flashlight and while the monitor is on, point it at the LCD and try different angles, etc. If you can see an image, it is the back light, probably the back light voltage converter unit in the lcd. It could also be the back light bulbs.

If you don't see an image with the flash light, then it could be the main logic board.

ort11

Mar 08, 2009 | Computer Monitors

2 Answers

Monitor shuts off but green light stays on


I perhaps can. I would think inverter or ccfl's.

Jun 12, 2008 | Dell UltraSharp 2407WFP 24" LCD Monitor

2 Answers

Repair manual


Problem solved! The main power thingy (the thing with the big red wire coming out of it) was all black and dusty. There was 'soot' all over the whole insides of the monitor. I concluded that this monitor should be laid to rest, and a new flat-screen monitor erected in its place.

Nov 18, 2007 | ViewSonic G220f (Beige) 21" CRT Monitor

1 Answer

Monitor (viewsonic e70fb) keeps shutting itself off


the screen has begun vibrating and is very hard to read.


it sounds me that there is some sparking in power supply or high voltage section (FLYBACK) due to loose contact,

 

your problem of  shut off, I would turn it back on and it would stay on

.might be also due to that only.

please call tech if you are not a tech person.

it is not a major one & simple to fix.

good luck.

Oct 11, 2007 | ViewSonic E70fb (Black) 17 in.CRT...

2 Answers

Dell 2407 a04 Turns on (for 2 seconds) then off


your pc may be set to a resolution that is out of range for the monitor. Boot into "Safe mode" reset the Display settings to 640 x 480. reboot into normal mode then change the screen settings to your desired resolution.

Sep 07, 2007 | Dell UltraSharp 2407WFP 24" LCD Monitor

Not finding what you are looking for?
Dell M992 19" CRT Monitor Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computer Monitors Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

William Miller
William Miller

Level 3 Expert

8820 Answers

Are you a Dell Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...