Question about Taiwan Semiconductor Co. TSC TTP-243 Thermal Printer

1 Answer

I NEED PART# PRICE AND AVALIBILTY ON TDP-643 PLUS MAIN PCB

Posted by on

  • Michael Masters
    Michael Masters May 11, 2010

    Hi there, if possible, can you provide me with your model# and serial please?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Ordered part from local vendor

Posted on Feb 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Image runner getting this error code (E261-0000) / how do i fix it


Code

E261-0000

Description

The intervals of zero-cross signals deviate from the tolerance range while the fixing heater is supplied with power

Causes

The wiring is faulty (short circuit, open circuit). The main power supply PCB is faulty. The DC controller PCB is faulty.

Remedy

1. Connectors Are the connector J205 on the main power supply PCB and the connector J308B on the DC controller PCB securely connected? (zero-cross signal: J205-7 <-> J308B-1) NO: Connect the connectors securely. 2. Main power supply PCB, Main controller PCB Try replacing the main power supply PCB. Is the problem corrected? YES: End. NO: Replace the DC controller PCB.?

Best Regards

Jul 24, 2016 | Printers & Copiers

1 Answer

What is main PCB failure?


Main PCB, where "PCB" stands for Printed Circuit Board. If this board is bad, the printer will not function properly and it will need to be changed. This is a job for a printer technician. You can call your local Office supply companies to find an authorized repair station that will give you a quote to fix it. If you are curious, you can look up the part on the Brother website or other printer parts companies that are on the internet and get a price on the part itself and if you feel competent to change the part yourself and maybe save some money. Be aware that changing this part is not for the faint-hearted. It might be cheaper just see if the printer is still under warranty. Good luck.

Sep 22, 2014 | Brother HL 2270DW Laser Printer

1 Answer

The solution for an error code E000733-000


E733
0001 A fault is detected by the main controller PCB in the communication between
the DC controller PCB and the main controller PCB.
Main cause The connector has poor connection. The DC controller PCB is faulty.
Action
1. Connector, DC controller PCB
Is the connection between the connector J1015 on the main controller PCB
and the conductor J316 on the DC controlled PCB normal?
NO: Correct the connection.
YES: Replace the DC controller PCB.

Jun 29, 2014 | Canon imageRUNNER 3225 Black and White...

1 Answer

Canon ir 2220 ERROR CODE E261


U NEED TO INVESTIGATE
the input/output ports of the DC controller PCBs.
COPIER>I/O>DC-CON<DC-CON (5/7)>
P020 xxxxxxxxxxxxxxxx=runs from left to right 15>0
ADDRESS=P020

BIT-
0- zero-cross signal -
1- heater trigger 1 signal 0: ON
2- heater trigger 2 signal 0: ON
3- heater error OFF signal 0: error
4- not used
5- not used
6- M9 registration motor phase A pulse signal -
7- M9 registration motor phase B pulse signal -

E261 0000
The intervals of zero-cross signals deviate from the tolerance range while
the fixing heater is supplied with power.
Main cause The wiring is faulty (short circuit, open circuit). The main power supply
PCB is faulty. The DC controller PCB is faulty.
Making Corrections
1. Connectors
Are the connectors J205 on the main power supply PCB and the connector
J308B on the DC controller PCB securely connected?
(zero-cross signal: J205-7 <-> J308B-1)
NO: Connect the connectors securely.

2. Main power supply PCB, Main controller PCB

Try replacing the main power supply PCB. Is the problem corrected?
YES: End.
NO: Replace the DC controller PCB.

Jan 22, 2013 | Printers & Copiers

1 Answer

Canon ir 2200 error e246-0002


An E246 is a Counter pcb issue. You may want to reseat the Counter pcb on the Main Controller, Also if you swapped the Main Controller you need to leave the orginal Counter pcb in the machine. If this doesn't pan out you need to call the TSC and open a ticket. You can not order a Counter PCB.

Mar 09, 2011 | Printers & Copiers

1 Answer

Error e000733


E733
0001 A fault is detected by the main controller PCB in the communication between
the DC controller PCB and the main controller PCB.
Main cause The connector has poor connection. The DC controller PCB is faulty.
Action
1. Connector, DC controller PCB
Is the connection between the connector J1015 on the main controller PCB
and the conductor J316 on the DC controlled PCB normal?
NO: Correct the connection.
YES: Replace the DC controller PCB.

Mar 04, 2011 | Canon imageRUNNER 2200

1 Answer

I have canon c2620n and when i turn it on give E 732-0001 i need help pleas


E732-0001 Error Code: Reader Controller PCB is faulty

[ Case in the field ]
Description
E732-0001 can be displayed when a communication error occurs.
Cause
In the field, this symptom occurred because the Reader Controller PCB was faulty.
Field Remedy
1. Make sure that the connector between the host machine and the reader unit is securely fitted.
2. Make sure that the connectors on the Reader Controller PCB are securely fitted or there is no pinched cables.
3. Remove and insert the Main Controller PCB (Sub) from the Main Controller PCB (Main). If the symptom still recurs, go to the Step 4.
4. Replace the Reader Controller PCB with a new one.


E732-0001 Error Code: locks up during copying

E732-0001 can be displayed when a reader communication error occurs.
Cause
As a result of inspection, it was found that this symptom occurred because of poor soldering of J1302-34pin on the Main Controller PCB (Sub).
Field Remedy
1. Make sure that the connectors are securely fitted between J1302 on the Main Controller PCB (Sub) and J502 on the Reader Controller PCB and that
there is no pinched cable.
2. If no problem is found, replace the Main Controller PCB (Sub) with a new one.


E732-0001 Error Code: Because of poor contact of SDRAM

Description
E732-0001 indicates that a reader communication error has occurred.
Field Remedy
As a result of inspection, it was found that this symptom occurred because the SDRAM was not securely fitted on the Main Controller PCB. So, remove
and insert the SDRAM once again.

Jan 31, 2011 | Canon imageRUNNER C3200 Copier

2 Answers

HP DesignJet 1055cm Plus system error: 04C300 001F0000.


Its either the EIO card, make sure its seated properly, or the hard disk drive has failed in your plotter. Try running the plotter with out the hard disk drive, it is static sensitive, so make sure your grounded before removing it.

Mar 19, 2010 | HP DesignJet 1050c plus InkJet Printer

1 Answer

E000733-0001 error code


E733 0001 - A fault is detected by the main controller PCB in the communication between the DC controller PCB and the main controller PCB.
Main cause The connector has poor connection. The DC controller PCB is faulty.
Action
1. Connector, DC controller PCB Is the connection between the connector J1015 on the main controller PCB and the conductor J316 on the DC controlled PCB normal?
NO: Correct the connection.
YES: Replace the DC controller PCB

Nov 13, 2009 | Canon imageRUNNER 5000 Copier

1 Answer

Error261 in canon copier


E261
0000 The intervals of zero-cross signals deviate from the tolerance range while
the fixing heater is supplied with power.

Main cause The wiring is faulty (short circuit, open circuit). The main power supply
PCB is faulty. The DC controller PCB is faulty.

Making Corrections
1. Connectors
Are the connector J205 on the main power supply PCB and the connector
J308B on the DC controller PCB securely connected? (zero-cross signal:
J205-7 <-> J308B-1)
NO: Connect the connectors securely.

2. Main power supply PCB, Main controller PCB
Try replacing the main power supply PCB. Is the problem corrected?
YES: End.
NO: Replace the DC controller PCB.

Feb 22, 2009 | Canon NP 7130 Black and White Copier

Not finding what you are looking for?
Taiwan Semiconductor Co. TSC TTP-243 Thermal Printer Logo

Related Topics:

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top Taiwan Semiconductor Co. Printers & Copiers Experts

kakima

Level 3 Expert

96571 Answers

old marine
old marine

Level 3 Expert

1469 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Taiwan Semiconductor Co. Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...