Question about HP iPAQ RX3115 Pocket PC

1 Answer

Ipaq rx-3115 stops at align screen after reset

My ipaq locks up after resetting.  Will not go past align screen.  Seems to be receptive to touches.  It does sync with activesync and computer and I have upgraded the ROM.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

This happened to me and i got so mad that i broke the screen. But that was a good idea because then i got a new screen and now it works fine. Just get another screen and it should work fine. or you can just get the digitizer part and swap out your LCD parts.

Posted on Apr 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ipaq rx-3115 stops at align screet after reset


Sounds like u need a replacement LCD
Easily found on ebay

Replacement screens usually come with instructions.

Please note u will need a hollow t8 or t9 tool to open the ipaq case.

Feb 17, 2009 | HP iPAQ RX3115 Pocket PC

1 Answer

I can't make my IPAQ pass the align screen


Replaced LCD touch screen in Australia.  Cost $95.00 AUS Thanks for Fixya help you where really great.

Feb 12, 2009 | Compaq iPAQ H3955 Pocket PC

1 Answer

Ipaq h5455 wont stop wibrating and i cant reset it


try a hard reset - it will restore to the original state. it removes all files and programs in the memory files in a storage card wont be affected.


Just hold down the calendar and today buttons, these are the two outer buttons on the lower left and lower right, then using a stylus press and hold for at least ten seconds the soft reset button this is located on the lower right edge of the unit. The screen should reset and the iPAQ will boot up again.

Mar 21, 2008 | HP iPAQ H5455 Pocket PC

1 Answer

Frozen screen


hello :-) i just talked to another person who was having the same problem as you. And guess what?? the same problem happened to me on my IPAQ 4350. It turned out when I would hard reset my IPAQ it asked me to align the screen but it wouldn't move and it would freeze and not let me pass . But I later found out that my screen was damaged and I got a new touch screen installed and my IPAQ works perfect :-). I would recommend for you to do the same and call HP and see if they could install it for you. Thanks :-}

Nov 05, 2007 | HP iPAQ H2210 Pocket PC

1 Answer

IPaq won 't respond to screen calibration.


So far no fixes. It's just been collecting dust. I think it's a screen response issue, and will probably cost more to fix than to replace (at least for me) in my situation. I'm thinking iPhone....

Jul 08, 2007 | HP iPAQ RX3115 Pocket PC

3 Answers

Ipaq RX 3115 Stops at align Screen


solia, I'm sorry, I didn't mean to close the chat session on you.
Is your unit still under warranty? If so, check with the manufacturer.
They can help.

Mike

Sep 27, 2006 | HP iPAQ RX3115 Pocket PC

2 Answers

Ipaq rx3115 doesnt turn on!


I am guessing that you have made sure that it is fully charged. If it is, since you have only had it a week I would try a hard reset. I don't know if the 3115 has them but check to make sure that any battery door lock switches are locked.

Sep 14, 2005 | HP iPAQ RX3115 Pocket PC

1 Answer

IPaq keeps moving appointment times


the ipaq automatically adjusts for daylight savings but the PC does not. On your PC double click on clock, click on Time Zone tab and then on that screen you will see the box that needs to be checked. also check that both PC and IPAQ are set to same time-zones.

Sep 11, 2005 | HP iPAQ RX3115 Pocket PC

1 Answer

Rx3115 locking up


To execute a hard boot on the iPAQ rx3115, the manual says to "while pressing the two outside buttons on front of iPAQ, press the recessed reset button on bottom." Hope it Helps... Wirzan

Sep 08, 2005 | HP iPAQ RX3115 Pocket PC

Not finding what you are looking for?
HP iPAQ RX3115 Pocket PC Logo

Related Topics:

199 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...