Question about Polycom Network Cable

4 Answers

My Polycom Soundstation Premier has an analog 8 wire plug. How can I get it to my 4 wire analog phone jack? A pinout solution would suffice. Thanks, Ken

Posted by on

  • kenneth_c_th Feb 17, 2009

    thank you. Micromaster did a great job and saved me hours of futile searching.... Ken

×

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 679 Answers

Please use the user manual for that.
let me know for further assistance.

Posted on Feb 17, 2009

  • rockfixya
    rockfixya Feb 17, 2009

    Please provide us the model number for more Help.


×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 19,396 Answers

The 8 wires plug must be a network cable, cannot be connected to a phone RJ11, it is a different kind of signal.

Posted on Feb 17, 2009

  • Ginko
    Ginko Feb 17, 2009

    The 8 pin must be an RJ45 ethernet terminator, that looks like a phone RJ11 connector, but it is a different thing.

    That is not analog , it is an ethernet cable and there is no way to connect a phone cable to that one.

    If I am wrong , please explain the problem with more detail.


×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,619 Answers

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,614 Answers

You will need a converter for that.

Posted on Feb 17, 2009

  • micromaster
    micromaster Feb 17, 2009

    just the like this:




  • micromaster
    micromaster Feb 17, 2009

    your always Welcome, Ken

    Thank you for using fixya, visit us here again.

    micro~


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Polycom soundstation 2 does not have a dial tone


That Polycom runs off of Analog dial tone.
Either a dedicated line or in most cases from an ATA off the phone system.
You should be calling your vendor/tech in that handles the phone system to check programming, cabel, jack and the Polycom itself too.

Dec 11, 2012 | Polycom Soundstation 2 Full Duplex...

1 Answer

What is the station type to use when hooking this polycom sound station premier EX to an Avaya S8300 on a digital port card?


The Polycon Sound Station Premier coference phone is an analog device. You need to connect it to an analog port on your phone system.

Dec 13, 2010 | Polycom >>> SOUNDSTATION PREMIER EX /AVAYA...

2 Answers

Polycom Sound station - help it won't work!


what line have you connected to the polycom? you will need to connect a single line circuit line.

Apr 06, 2009 | Polycom SoundStation

1 Answer

Need a user Manual


here the most i can find

The SoundStation Premier and Soundstation Premier EX has been discontinued and is no longer available for purchase. Support for the product will be available until 02/21/2010.

http://www.polycom.com/global/documents/support/setup_maintenance/products/voice/soundstation_premier_user_guide.pdf

Mar 19, 2009 | Lands Phones

1 Answer

Flash timing setting for polycom sound station


You need to update the flash timing on your Soundstation to match what is on your PBX.

Check out http://knowledgebase.polycom.com/kb/search.do?cmd=displayKC&docType=kc&externalId=10964&sliceId=SAL_PUBLIC_1_2&dialogID=2075496&stateId=0%200%202071605 and http://knowledgebase.polycom.com/kb/search.do?cmd=displayKC&docType=kc&externalId=11208&sliceId=SAL_PUBLIC_1_2&dialogID=2075496&stateId=0%200%202071605

Jun 06, 2008 | Polycom SoundStation Premier EX Audio...

1 Answer

Static from SoundStation Premier


Check the phone cable you are using for your POTS line. Attach a phone directly to the phone jack and see if it is clear or static without the device.

May 20, 2008 | Polycom >>> SOUNDSTATION PREMIER EX /AVAYA...

1 Answer

Comcast Cable Modem with Polycom Soundstation Premier


Try adjusting the ringer volume, dial tone volume, and speaker volume. Make sure that the ringer type selection is not set to off. Also make sure that you are not bridging your call.

You can also use the Upgrade feature built into the phone to look for updates which may resolve your issue.

If this has only started happening recently, Restore the default settings and see if it resolves your issue.

Mar 20, 2008 | Polycom SoundStation

7 Answers

Polycom soundstation Ex - no dial tone


Someone in our office recently damaged the RJ-45 cable for our Polycom Soundstation. Because the jack was damaged I could not determine the order of the cables. After a call to polycom, we found the pinout information we needed - so I thought I would share, in case anyone else finds themselves in a similar situation:
With the RJ-45 prong pointing down the wires, from left to right are:
  • Black
  • Brown
  • Red
  • Orange
  • Yellow
  • Green
  • Blue
  • White
Then Crimp and test. I got this information directly from Polycom for use with the Polycom Soundstation. This information was not easy to get. They originally told me they could not provide the information and I would have to buy a power adapter. This is not true, just trim the cable and follow the above instructions.

Sep 14, 2007 | Polycom PCY220016000001 SoundStation2...

Not finding what you are looking for?
Polycom Network Cable Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polycom Computers & Internet Experts

Clive Gray

Level 3 Expert

1479 Answers

Michael Vincent Cruz

Level 3 Expert

868 Answers

Justin
Justin

Level 3 Expert

2072 Answers

Are you a Polycom Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...