Question about Air Purifiers
Tips for a great answer:
Sep 18, 2015 | Kenmore Air Purifiers
The Intelli-Check™ Filter Monitors will indicate replacement of the pre-filter and the
HEPA filter. Depending upon your individual usage (environment and hours used),
you may need to check and replace the filters more or less frequently.
To check Expected Filter Life Usage
When the unit is turned on, quickly press the appropriate filter monitor button. The
pre-filter light will flash up to 3 times and the HEPA filter light will flash up to 4 times,
depending upon how much expected filter life has been used.
1 flash = from new, up to 1/3 expected life used up
2 flashes = between 1/3 and 2/3 expected life used up
3 flashes = between 2/3 and all of expected life used up
Remains on = time to check/replace pre-filter
1 flash = from new, up to 1/4 expected life used up
2 flashes = between 1/4 and 1/2 expected life used up
3 flashes = between 1/2 and 3/4 expected life used up
4 flashes = between 3/4 and all of expected life used up
Remains on = time to check/replace HEPA filter
To RESET Filter Monitor
When the filter monitor light remains on, it is time to check/replace the filter and reset
the filter monitor, if needed. With the unit powered on, press and hold the appropriate
filter monitor button down for approximately 5 seconds until the light turns off.
Depending upon your individual usage (environment and hours
Mar 29, 2011 | Kaz Honeywell Hepa Air Cleaner (50250) Air...
Nov 13, 2008 | Air Purifiers
Apr 14, 2008 | Bionaire BAP815B-U Air Purifier
Apr 08, 2008 | Holmes Products (HAP223-UC2) Air Purifier
Apr 06, 2008 | Kenmore 85244 Air Purifier
Jan 18, 2008 | Kenmore 335 CADR Air Purifier
Sep 21, 2007 | Bionaire HEPA Air Purifier Air Purifier
Jan 13, 2017 | Air Purifiers
856 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: