Question about Plumbing

Open Question

Free manuals i need help finding a free manual on my JB Fast Vac Dv-142 Vacuum Pump

Posted by on

  • alicia_myree Feb 17, 2009

    i need the original service manual for this machine


5 Suggested Answers

  • 625 Answers

SOURCE: manual for genie vacuum

Take the top part off and look at it. there should be some screws around the circumference of the top holding the upper part. remove these screws and the motor/switch section should come off. You'll probably find more screws holding everything else together. the switch fits into an all plastic holder and is more than likely a slide switch.

Posted on Sep 01, 2007

Agent Don
  • 310 Answers

SOURCE: Need an owner's manual on line
Need an owner's manual on line
Posted by LinJay on Jun 09, 2008
I have lost my owner's manual for my shop vac and need to figure out how to set it up so I can pump out my flooded basement using a garden hose.
Is there anywhere I can find an owner's manual on line??
The model stated on my vac is not what I clicked on your vac states:
Model QPV 10.5

I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. I am supplying you with the contact for the Shop Vac Factory Service for owner’s manuals listed below: for the website and the customer service line, but make sure you include the Shop Vac Model # and the Serial # as well. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions. Customer Service 570-326-0502 Phone #
Shop-Vac Corporation Customer Service 570-326-7185 Fax #
2323 Reach Road
P.O. Box 3307
Williamsport, PA 17701
Hours are: Monday thru Friday 8:00 am to 5:00 pm (EST)
Thanks, Don the Vac Man
Go Ahead. Use Us.

Posted on Jun 09, 2008

  • 1 Answer


Please go to this site for free download.

Posted on Oct 21, 2008

  • 5 Answers

SOURCE: Need a user manual for Homelite Vac attack 2

I have a Homelite UT08107
Leaf Vac, I couldn't get it started so I took it completely apart and cleaned it all up and now I can't figure out how to put it back together. I'm looking for a shop or a servive manual

Posted on Sep 04, 2009

  • 20 Answers

SOURCE: need operating manual for robinair 4cfm vacuum pump

Contact us at

We are a service center, and can get you the manual

Posted on Oct 02, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Need manual

Check for blockages just inside the inlet, check for non return valves for sticking or not opening fully. Impellers often have a box channel that the liquid travels down when spun, check these for obstruction. Only further thing, the pump normally has to be primed and be FULL of liquid. Any air inside the pump will reduce flow.

For the manual

make model manual

or check the manufacturer's website.

I used to own a watermill and used a lot of water supplied by a jet pump.

Mar 24, 2016 | Plumbing

2 Answers

I need a manual for a Homelite chainsaw Where is

Hi calwolfe...
Go to the following website and download your manual, if it is among the list.
You did not get me a model so I did not have much to work with to find your user manual for your chainsaw.
Please take time to rate me

Sep 10, 2011 | Homelite 33cc 38cc 45cc Chainsaw Oil Pump...

1 Answer

How do i operate it?

Go to the Mastercool web site:
Pick out your model number and then click on "instructions" to download a manual. The most important thing is to change the oil frequently. This unit is used in HVAC to draw a vacuum on an evacuated AC system after repairs were made to insure it is free of any condensables.

Aug 01, 2010 | Mastercool 15 Cfm Deep Vacuum Pump 90059

1 Answer

I have never taken a Duro piston pump apart, It is used to pump water from well to house, lift 25 feet run 200 feet, I would like to find a kit and put in but also have a manual to see how to repair it is...

I solved it by continueing my search and one gentleman sent me a manual and added information at no charge. gee it seems there are more experts, a has been underpressure, that want a fee then good advice and knowledge for free, what a world we have created

Dec 13, 2009 | Plumbing

1 Answer

I need a manual for a 636 flowcrete concrete pump

Parts inside your printer are at the end of their service life. See your printer documentation.

sir, what should i do?

Nov 03, 2009 | Plumbing

Not finding what you are looking for?
Plumbing Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plumbing Experts

Donni Steen

Level 3 Expert

659 Answers

Brad Brown

Level 3 Expert

14360 Answers

Tom Chichester

Level 3 Expert

27856 Answers

Are you a Plumbing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides