Question about Uniden TRUNKTRACKER III

2 Answers

Not receiving the tunked freq.

I have programed all the Mass State Police Freq. The scanner scans them but never receive any calls. Not sure if I missed a step or not

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,761 Answers

You didn't mention a scanner model or the type trunk system that you're working with. If you've entered a digital system into an analog scanner it won't receive the signals you're after, and some EDACS trunk systems have a security feature that will cause scanners to completely ignore in-use frequencies. For detailed information on your scanner and the systems that are active in your area, I recommend that you join www.RadioReference.com You can view or participate in owners' forums for your scanner and also gain access to a massive frequency/system database. Depending on your scanner model you might also be able to download and automatically program those systems and frequencies. Programming software is available from www.ScannerMaster.com, and cost ranges from about $30 to $70 .

I hope that this info helps. If it does, please take a moment to post a rating for me. A rating of "Very Helpful" would be appreciated.

Posted on Nov 24, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 127 Answers

You may be trying to pick up a frequency that is to far away for that scanner. not all scanners pick up as far as others.

Posted on Apr 19, 2009

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Finding the frequencies on my uniden BC148XLT bearcat


u have to go to the lab n see the freq

Sep 08, 2016 | Uniden Scanners

1 Answer

Where do i get free police scanner frequency at what site


http://www.police-scanner.info/ is one site that offers frequencies. the easiest way though is to go to Radio Shack and purchase the scanner frequency book for your state. another alternative is to go to your book store and get the book. If you do a google search for scanner frequencies, sometimes you can get them for free. You might also contact friends who have scanners in your area and get the frequencies from them. The FCC lists all the scanner frequencies, as the people who use them, police, fire, ambulance and also coast guard, are all licensed and this is public info. so google the fcc and check there. I have several scanners and this is how I got my freqs.

Mar 08, 2011 | Scanners

1 Answer

How do I program an Uniden BC-60XLT-1 scanner?


you need a USB to scanner interface and a program like w95.exe to ytransfer freq uencies to the channels. It;s a lot easier this way than laboriiously entering 1 at a time.

type w95.exe into berowser and download It's free but the transfer item cord is available from some ebay sellers Serial / USB transfer cable for bc60xlt

Jun 25, 2010 | Scanners

1 Answer

I downloaded the disk for my scanner and now I dont know what to do so I can ues it.


Not sure what kind of scanner you have, but on my Lexmark, I have to push the scan button on the printer to scan. It then downloads the application list to the scanner, and scans. After it scans, then the Lexmark Imaging Studio (the downloaded program on the computer) comes up on the computer screen, and received the scan. Not knowing what kind of scanner you have, I can only explain in generalities. Good luck, and hope this helps.

Jun 16, 2010 | Scanners

2 Answers

Who can program my scanner in the Columbus, Ohio area?


http://www.police-scanner.info/police-scanner-frequencies.htm make sure you have the right frequency first. If so frequency # has a . in the # make sure that you put it in or it well not go.

Jun 22, 2009 | Uniden TRUNKTRACKER III

1 Answer

Download Project with MCL-Link or MCL-Designer


Hello Jim,
the device has a special mode for downloading the project. You would need to go to the menu on the P360, activate the mode and put it to the cradle.
You can also scan a special barcode Load New MCL-Designer Application to activate the mode, please find it at the page 1-4 at http://support.symbol.com/support/search.do?cmd=displayKC&docType=kc&externalId=3769004apdf
Please make sure that your program in the MCL project is not larger then 4K. MCL has a limit of 4K for any program in a project including the main program.

Dec 09, 2008 | Symbol Batch Barcode Scanner P360/460...

1 Answer

My Nikon Coolscan 8000 Ed will not start


Make sure that the computer you are using meets the criteria for the program with both the operating system and hardware. If so, try un-installing the camera software and then re-installing it. Beyond this, the problem can become a little complicated and require you to call the tech support from Nikon. They should know what it required to make their program function properly.

Jerry G.

Oct 22, 2008 | Nikon Super Coolscan 8000 ED Film Scanner

1 Answer

Scanner command invalid in current state


I have not used CapturePerfect 3.0. Hope the scanner is just fine. Try count only mode to check if it is okay.

Uninstall Captureperfect. Run chkdsk/scandisk to check if OS is ok. Reinstall Captureperfect again and it should work.

S. Mohan

Jan 31, 2008 | Canon DR-9080C Path-Through Scanner

2 Answers

UNIDEN BEARCAT BCT 15


go to menu -hit yes look for new channel and add freq email me a ghe518@yahoo.com

Jan 17, 2008 | Scanners

5 Answers

Programming bc147xlt uniden scanner


to program the uniden bc147xlt use the manual button to select channel you want to program. punch in the desired 6 digit frequency then press E, press review to check that frequency was input correctly then use the manual button to go to next channel for programming.MAKE SURE WHEN ENTERING FREQUENCY YOU INPUT THE (.) AFTER THE FIRST 3 DIGITS FOR EXAMPLE GO TO CHANNEL 1 PRESS 149.220 E AND YOU should have no problem programming . hope this is helpful

Dec 11, 2007 | Scanners

Not finding what you are looking for?
Scanners Logo

224 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Scanners Experts

buzz flewhart
buzz flewhart

Level 3 Expert

655 Answers

Mohan Sriraman
Mohan Sriraman

Level 2 Expert

490 Answers

Robert McClure

Level 2 Expert

160 Answers

Are you an Uniden Scanner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...