Question about Kenmore 24032\24036 Top Load Washer

1 Answer

Tub is of balance and broken

I have a Kenmore stacking washer and dryer. The tub on the washer is totally out of balance and I'm sure the seals and bearing? are broken. Is it possible to repair this myself?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 640 Answers

It wont be worth it by the time you buy ,,special tools and parts,,and labor will take a lot of time...its just better to get a tech on the bearing job...onthejob

Posted on Feb 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On a stacked 417 Kenmore,what is the best way to get to the seal-tub


Here is a service manual for the stacked set. The model may be a little different but the repairs will be the same.

Oct 22, 2012 | Kenmore 98702 Stacked Washer/Dryer

2 Answers

The washer made a horrible noise and the tub seems to be loose from the machine. Can I fix it? The tub in my Frigidaire stacked washer all of a sudden with a fairly heavy load of jeans started making a...


you need to remove the agitator and check the bolts that hold the trunion to the shaft and make sure they are not broken.if one is just replace them make sure that the bracket is in the flat key way on the tub hope fully the tub seal is still good.

Oct 15, 2010 | Frigidaire FEX831CS Top Load Stacked...

1 Answer

Drum seems broen and off balance


if it is washer, most likely need spring kit they look like shocks that the tub sets on

Apr 18, 2010 | Kenmore 98702 Stacked Washer/Dryer

1 Answer

I have a top load stacked washer/dryer. my washer is out of balance and the tub is lose also starting to make a seaking noise.


you need to remove the agitator and look at the bolts that hold the tub to the shaft it sounds like you have one broken or loose.there is a slot on the sied of the shaft that the braket fits in and gets tightend to make sure it is seated properly.

Feb 12, 2010 | Frigidaire FEX831CS Top Load Stacked...

1 Answer

Kenmore stacked washer and dryer was washer spins but out of balance


Check the Vibration damper rods to be sure that...
1. They are there and mount is solid.
2. If they are broken in 1/2.
3. The plastic knuckle mounts are not missing/broken.
4. There is oil in the shock absorber/spring section of the rods.

Also - there are suspension springs on the bottom of the tub that could be broken and/or missing.

Replace/repair as necessary.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Apr 21, 2009 | Kenmore 94802 Front Load Stacked Washer /...

1 Answer

Kenmore laundry center stacked washer/dryer washer tub shakes almost violently on spin cycle.I may have changed setting during spin cycle.Tub is off balance.The appliance cabinet is balanced and on a solid...


Head over to the manufacturer's website.

www.SEARSPARTSDIRECT.com and enter your full model number for an expanded parts diagram and ordering information.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Apr 11, 2009 | Kenmore Washing Machines

1 Answer

Washer


Check the Vibration damper rods to be sure that...
1. They are there and mount is solid.
2. If they are broken in 1/2.
3. The plastic knuckle mounts are not missing/broken.
4. There is oil in the shock absorber/spring section of the rods.

Also - there are suspension springs on the bottom of the tub that could be broken and/or missing.

Replace/repair as necessary.

IF THIS IS A BRAND NEW INSTALLATION - be sure you hav removed the basket shipping pins (4) that secure the tub during shipping.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Mar 27, 2009 | Kenmore 98702 Stacked Washer/Dryer

2 Answers

Kenmore stack washer/dryer model#11098752790


Check your lid switch ,if its not engaging replace it.

Jun 03, 2008 | Kenmore 98702 Stacked Washer/Dryer

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...