Question about Kodak Easyshare C813 Digital Camera

1 Answer

Computer does not recognize camera

When I purchased the camer and downloaded pictures at first it was ok but now nothing happens just that computer states does not recognize camera/software.

Posted by on

  • Anonymous Mar 21, 2009

    i have a kodak C813, when i first got the camera and uploaded photos to the computer it worked. Now i have one problem. When i plug the usb cable to the side of the camera, and to the back of the monitor in the usb plug. the camera turns black. then when i pull up the kodak easyshare gallery it says. CANNOT FIND DEVICE!!!!

    SOMEONE PLEASE HELP MEE. :(

  • jdthefixer May 11, 2010

    Try these:



    Try plugging the camera USB cord into a different USB port - plug the other end into the camera and THEN turn the camera on and see what happens. You may have incorrectly disconnected the camera from the PC before you used the "Safely remove hardware" method. I am assuming the camera itself functions ok.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Kodak Master
  • 96,372 Answers

Consider NOT connecting your camera to your computer.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.

Posted on Oct 11, 2012

6 Suggested Answers

IrishDruid
  • 2712 Answers

SOURCE: Trying to get pictures off of my camera w/ a USB cord

You will need software for the camera to be installed on the computer first. You should be able to find it by going to the manufacturer's website, where they will be able for download.

If you have difficulty finding it, please reply with make and model of camera, and your operating system details.

Cheers!
ID

Posted on Nov 27, 2008

rajak2009
  • 527 Answers

SOURCE: Cannot download pictures from camera to computer

Sir,
First uninstall the software and try to reinstall the software with by manual follow instructions. 
Link 1
Thanks Good Luck
Appreciate to rate as "Fixya"

Posted on Mar 07, 2009

calif-jones
  • 15 Answers

SOURCE: pictures not loading to computer

It sounds like you don't have software on your PC that will recognize the camera when connected. I am going to recommend that you do not use the camera to upload photos. It is better practice to use external (SD) memory cards and remove them from the camera to upload. You can use a USB SD reader or purchase SD cards with a built-in USB interface. You should be able to see a new drive when connecting the SD card to your computer; then all you need to do is copy over the images. One advantage is that you will save camera battery while uploading because you dont need the camera at all. It also allows you to take images with you without taking the camera, i.e. school or work. I hope this helps...californiajones7889e54.jpg67432f4.jpg4db3d64.jpg

Posted on Mar 09, 2009

kevlarr33
  • 31 Answers

SOURCE: Cannot download pictures from camera to computer

What system Are You Using? Im Using windows Seven And Vista, It Will Not Work . Just Use Sd card Reader Or Flash Usb Sd reader.

Posted on Jun 25, 2009

  • 24 Answers

SOURCE: I cannot download pictures from camera to my

Hello, I not sure if this well help, but this is the information that came with my Z1275.

Minimum System Req:

Windows OS XP or later, Internet Explorer 6.0 or higher
600 MHz processor or higher
Macintosh OS X 10.3 or higher

Minimum Hardware:
128 MB ram
200 MB available disk space
CD-Rom drive
USB port

I have vista on my computer and I looked on kodak help site and I did not find any updated or conversion software for the Z1275 camera.

I use a SD card and then put the SD card in my computer to transfer pictures.

Posted on Aug 03, 2009

  • 97 Answers

SOURCE: My computer (Windows XP) doesn't recognize my

perhaps the download cable is bad or the plug is dirty and just not making contact. try cleaning the metal contacts on camera and cable somehow small flat toothpicks and a little rubbing alcohol

Posted on Jun 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I've been using my camera, and downloading pictures to my computer, without problems for a few years. Now, when I plug the camera to my computer, I get a message on the camera that says 'communication...


Sounds like you forgot to use the "safely remove hardware" function once before and now the camera can't be recognized by computers. That's ok....happens to all of us. Just get a card reader and use it for downloads. It's far easier than the camera/USB system anyway. typrice_137.jpg

Feb 19, 2011 | Canon PowerShot A560 Digital Camera

1 Answer

When I connect my camera to the PC and select PC on the camera monitor then ok, the camera displays "one moment" and nothing happens. My PC does not recognize the camera


Consider NOT connecting your camera to your computer.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive. Or you can use any photo cataloging program.

Jan 14, 2011 | Olympus FE-170 Digital Camera

1 Answer

I am unable to transfer pictures from my camera to my computer. when i connect the camer and computer to the USB port and turn the camera on nothing happens. In the past a window would pop up and you could...


Consider NOT connecting your camera to your computer.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use Canon ZoomBrowser or any other photo cataloging program.

Aug 14, 2010 | Canon Powershot A1000IS Digital Camera

1 Answer

Have a Canon A720 IS won't download.


Blame Microsoft updates. Try using a separate card reader instead of your camera.

Jan 04, 2010 | Digital Cameras

2 Answers

Cannot download pic.s from camers to pc.


I would remove the memory card and use that to transfer the media to your pc.... I can't tell you why it is not showing up on any of the pc's. The only thing I can think of is possibly the usb cord is bad or that vivicam has special software you need to download. But you can definately get the media onto to your pc by bypassing the usb cord and remove the media from the card and place it in a folder on your pc .. hope this helps... good luck

Oct 19, 2009 | Digital Cameras

1 Answer

Computer will not recognize canon A70 Camera


Try NOT connecting your camera to your computer.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.

Sep 02, 2009 | Canon PowerShot A70 Digital Camera

1 Answer

Got svp hddv-2880 digital camera and video no software


I worked with the camera until I tried every possible combination of settings. Once I set the camera back to video instead of camera function and plugged it into the computer then it gave me a reading of Mass Storage and downloaded the 64 pictures I had taken and offered me the chance to save to a folder!
Stella

Jan 10, 2009 | SVP Digital Cameras

3 Answers

Says camera is not connected to computer


I found this on another site. You have to set the camera itself to Mass Storage mode in order to work with Windows 2000. The steps are below. As soon as I did and plugged the camera back into the USB cable, Picture Project recognized the camera as connected, installed the mass storage driver for it and requested a restart of the PC. Able to access the memory card and download pictures.

On the camera itself, unplug the USB, turn it on and...

Press MENU....
Press ▲▼to choose SETUP...press OK...
Press ▲▼to choose INTERFACE...press OK...
Press ▲▼ to choose USB...press OK...
Press ▲▼to choose MASS STORAGE...press Ok..
Press MENU to exit...
Then plug it back into the USB cable.

Good Luck

Dec 20, 2007 | Nikon Coolpix L11 Digital Camera

2 Answers

Says camera is not connected to computer


I'm assuming that you are using a Windows based machine? If so, try another computer. If the camera is recognized when you plug it in, you have a software / driver issue and it's not in the camera. Just plug the computer into any other computer and don't bother with the software.

Oct 05, 2007 | Nikon Coolpix S1 Digital Camera

Not finding what you are looking for?
Kodak Easyshare C813 Digital Camera Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Digital Cameras Experts

kakima

Level 3 Expert

96372 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Tony

Level 3 Expert

2598 Answers

Are you a Kodak Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...