How do you UNinstall a GE Above the Cooktop MICROWAVE?

Typical of a control microchip failure caused by a power surge. With a microwave as old as yours, it is safest to simply replace the entire oven rather than attempt to fix it, as older magnetrons are likely to fail.

I used stacked books because I had no help.

No, not with the same mounting hardware. You have to replace everything. I recommend Panasonic first if you can find it in a hanging hood model, Whirlpool second. Make sure you also install a 2000 joule or larger surge protector. Good Luck, Appliance Specialists

You should be able to contact GE and see if they have a "drop-in" replacement for your model.

GE Customer Service is here.

Quite often, microwaves are pretty easy for the DIYer to fix. Feel free to contact me with your full model and symptoms for free help.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller, AS-EET
[email protected]
http://www.microwavedisplay.com
Microwave Oven Control Panel Repair Nationwide

Check the fuse in the bottom of the oven ... near where the power cord enters.

Disconnect from electricity. Remove screws holding outer casing and you will see the inline fuse. Make sure there is nothing that will cause the fuse to blow again. Always replace the outer cover before testing.

You can download GE owner's manuals and installation instructions here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Here a few site can help you:
http://www.partselect.com/
http://www.repairclinic.com/

I’m happy to help further over the phone at https://www.6ya.com/expert/vitaliy_f406165329c75ede

You can download GE owner's manuals and installation instructions here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

I would check the area around the ceiling of the microwave. There may be grease of other food buildup on the waveguide cover. Or the stirrer may be sticking or arcing, which would need to be replaced. This unit may be subject to post-manufacturing modifications, requiring a few new parts. You might check on this with GE Customer Relations at 1-800-386-1215 (8-6 ET). If they cover the cost of parts, great. If not, you can get them cheaper here: http://tinyurl.com/gv383 Feel free to see my site for my safety & disassembly files.