Question about Tascam US-122 Sound Card

2 Answers

TASCAM US-122 OUTPUT, WHAT SPEAKERS TO USE?

I've recently got a Tascam US 122 Sound card, But because the output is a red and white connection (rca i believe) I'm not sure how to connect them up to monitors, If anyone knows what cables i'll need to use etc.. then let me know! Thanks

Posted by on

  • lewgoswell Feb 18, 2009

    yes. Okay brilliant, :) Would you be able to link me to the ones i would need? I have a feeling i'll find the wrong ones! haha

  • Roberta Smith
    Roberta Smith May 11, 2010

    monitors as in speakers ? if that is indeed what you mean there are cables you can buy that have rca on one end and 1/8 inch plugs on the other end

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 5,158 Answers
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 285 Answers

You simply need a cable that converts this rca output to a Jack output.

Here's a link I think is right, though to make sure we would need more info about your model of soundcard:

http://www.kabeltje.com/audio-jack-tulp-c-54.html

I hope this helps,
Yannick

Posted on Feb 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you hook up a Tascam 122 cassette deck to a receiver i tried to hook it up to my Nad 7155 receiver and no sound what am i doing wrong please help


cassette decks have line OUTPUTS. If it records there may be line inputs. Connect the OUTPUTS to the appropriate INPUTs on ur amp. Select the correct input on the amp. If it doesn't work u will need to verify the amp inputs work and that the tape outputs r active.
If so chg the cables.

Jun 02, 2016 | Tascam Audio Cards

1 Answer

What's your problem? get tascam us 122 working on windows 7


Hello you can try the vista driver from here:

http://tascam.com/product/us-122/downloads/

It will maybe not run in 64 bit.

Try to install the software in compatibility mode.

Here is a youtube video that shows how you do that:

http://www.youtube.com/watch?v=yI8CSG77gVg

Good luck

Oct 28, 2012 | Tascam US-122 USB Audio/MIDI Interface...

1 Answer

I am only hearing audio out of my left headphone speaker when plugged into the Tascam US-122. how can I play back my tracks and have the audio fill both speakers?


you might be using a mono output jack or input jack.....check the jack end...1 ring = mono / 2 rings = stereo
make sure your sending a stereo signal in, then check the L/R balance.

Jul 06, 2011 | Tascam US122 Audio/MIDI Interface with...

1 Answer

I connected everything for my tascam us-122. I installed ASIO4ALL and it says everything is installed correctly yet It's not picking up anything from my mic?


hi there,
there can be a number of issues here. if its not picking up anything it may be down to your DAW software. what are you using to record? check the preferences of that software program to make sure it is accepting audio from the tascam unit and playing back through the desired output.
also for primarily windows go to the control panel and check that the audio devices are set up to use the tascam rather than the built in audio.
manuals and driver downloads can be found here...
http://tascam.com/product/us-122/downloads/
as asio4all is tempremental and dosnt work for all like it boasts.

Jan 20, 2011 | Tascam US122 Audio/MIDI Interface with...

1 Answer

I have a Tascam TM-D1000 digital mixer that has a TDIF output and want to connect this to my computer. Do I need a PCI 822 card or is there another option to connect?


I have a TMD1000 connected to my computer via the RCA ( Red & White) outputs on the mixer to an M-Audio 2496 Sound card in the computer.
also via the Digital out on the mixer to Digital in connector on the card.
I then edit recordings on the computer with Cubase pro.

Nov 28, 2010 | Tascam PCI822 Digital Audio DTRS Interface...

1 Answer

Can get soundcard to work with my new studio speakers


i have a tascam us 122 and a mac leopard OS I cant find the drivers on tascam.com help me please

Nov 02, 2007 | Tascam US-122 USB Audio/MIDI Interface...

Not finding what you are looking for?
Tascam US-122 Sound Card Logo

Related Topics:

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tascam Audio Cards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Ben Armstrong

Level 2 Expert

332 Answers

Florin

Level 3 Expert

733 Answers

Are you a Tascam Audio Card Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...