Question about Back to Basics Popcorn Popper (PC6) Popcorn Maker

3 Answers

Broken plastic window

I have a Back to Basics stainless popcorn popper. We love it but the plastic window on the top is broken. Does anyone know where I can find a replacement?

Posted by on

  • 6 more comments 
  • kirbybj Feb 18, 2009

    I have the same popper and the plastic windows is cracked also. I need a replacement window or new top.

  • Mike Mar 02, 2009

    Broken plastic wndow. Where can I get parts?

  • hulbe002 Mar 12, 2009

    My window just broke after owning the back to basics popper for 5 years. am heart broken. Can anyone help me find company to call for parts?

  • Anonymous Apr 20, 2009

    I have the same popper and recently the window broke as well. I've had no luck finding parts and just broke down and bought a new popper.

  • Anonymous Apr 21, 2009

    would also love a replacement window!! Have had this popper for a long time :(

  • Anonymous May 21, 2009

    I have a popper with a broken window also. Is there any where we can get a replacement for the lid?

  • Anonymous Mar 17, 2014

    I am looking for the plastic shield for the lid of my back to the basics popcorn popper is broken replacement

  • Steve Cunningham
    Steve Cunningham Dec 26, 2015

    Where can I get the gears

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have found the plastic window online at the Back to Basic Company web site.
http://www.focuselectrics.com
I ordered two. They were $2.00 each plus shipping.
I navigated to the parts area, to the popcorn. Here is the link. http://www.focuselectrics.com/catalog.cfm?dest=itempg&itemid=3678&secid=53&linkon=category&linkid=90
Hope this helps.

Posted on Aug 10, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I just bought mine at Goodwill. You might check there for one, there were several of them in stock.

Posted on May 20, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

NO you can't get a replacement window for B2B popper. The current models they make don't even have one at all, and the manufacturer is in denail they ever made it. I know because mine's broken too and they blew me off a couple years ago when i tried. Made me mad

Posted on Feb 05, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi does anyone know anything about the frutina slush machine. Ive just bought a preowned one. Im not sure its working right and it didnt come with instructions. Thankyou


Well I live in Southampton, and Ice Frutina are based here. The liquids come in great big containers that you just pour in ready mixed I think (or perhaps its from concentrate, I'm not sure) but either way the mixing instructions should be on most slushie mix containers. For the machine to make slushie you basically need two things to happen...
1) the powerful refrigerator within the unit should function and chill/freeze the liquid in the hopper
2) The agitator should be constantly turning inside the hopper to break up the ice crystals as they form turning the liquid into slush rather than just a block of solid ice.

If the refrigeration is working, you should notice a pretty quick drop in temperature of the liquid in the hopper... It may be worth checking any fans are working properly and not seized up. Check the refrigerant compressor is humming.

That's about as much as I can help you I'm afraid. Hope it ends up working for you :)

Good luck!

Jan 07, 2017 | The Kitchen Appliances - Others

1 Answer

How do i change nozzel on oil burner


Turn power off and isolate the fuel line/lines. Disconnect flare fitting on fuel line to the burner assembly. Open burner assembly...either the primary controller or ignition transformer should hinge open with a few screws on the other side. Should be a locking nut on the fuel line to the burner and electrodes...loosen and pull burner/nozzle/electrodes. I Don't recommend removing the electrodes if you don't know how to space them correctly, so unless you have a nozzle removal socket/ratchet, then use a deep well socket & back it up with a large pair of channel locks. Thread pattern is normal...LLRT. When replacing nozzle, Make sure you have the same gallon rated, spray pattern (hollow, semi, solid etc) , & degree (angle).

Jan 19, 2015 | Kitchen Appliances - Others

1 Answer

Popcorn maker bc-2970cr not heating


Check the overheat sensor is working. Then check the heating element of the kettle. Or may rusted surface on the connecting terminals.

Mar 14, 2014 | Kitchen Appliances - Others

1 Answer

I purchased a Model CCP-509 popcorn popper from a friend and it has no removable collection tray. Can you advise me how to buy one?


use any or all of these internet search engines: google.com ,ask.com,yahoo.com,bing.com and type in:parts for (name of the brand) and model ccp-509 popcorn popper.

Oct 02, 2013 | Kitchen Appliances - Others

1 Answer

Frutina slush machine what button dose what


Hi sorry i know this a old post. Im just wondering if you found out what the buttons do as i dont have an indtruction manual and need to know myself :)

Thanks
kate

Jun 19, 2013 | Kitchen Appliances - Others

2 Answers

Need to replace the heat stripe tape on my tilla foodsaver vaccum sealer


concerning my food sealer: the strip under the heating wire came loose & would not stay in place. i almost threw the unit away but its at least $40 to buy another. i decided to buy a roll of PTFE Coated Fiberglass Fabric With Silicone Adhesive Tape. PTFE is Teflon but u cant use Teflon as a search term because of the copyright. i found a roll on ebay for $3 (free ship) from China (how do they do that!). it took about 2 weeks for the roll to arrive. I cut a strip to fit under the wire. The wire had burned & partially buried itself in the unprotected plastic. Be gentle when nudging it out & clean off any material that has attached itself to the wire. Seals & works like new!
would you like to buy the rest of the roll? the roll has about 28 feet left.
need-replace-heat-stripe-tape-tilla-eozdydolbm4tnefq4rajkivb-4-0.jpg

Dec 27, 2012 | Kitchen Appliances - Others

3 Answers

Tell me list of recovery software that you peoples experienced that working fine.i need software to recover data after formatting the hard disk.


Hey, you can use Card Data Recovery. It can help you recover data from formatted hard disk.
Itfeatures an extremely easy interface and powerful functions that allows usersto recover deleted and lost photos, music and video files. The software workswith Microsoft Windows® 2000/XP/2003/Vista and Windows 7, and it's very easy touse.

Dec 20, 2010 | Keating Instant Recovery 20AA (NG) Deep...

Not finding what you are looking for?
Back to Basics Popcorn Popper (PC6) Popcorn Maker Logo

1,676 people viewed this question

Ask a Question

Usually answered in minutes!

Top Back to Basics Kitchen Appliances - Others Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

EugenesDIYDen
EugenesDIYDen

Level 3 Expert

479 Answers

Pierre Legault

Level 3 Expert

380 Answers

Are you a Back to Basics Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...