Question about Frigidaire 24 in. PLD2560LCC Energy Star® Built-in Dishwasher

2 Answers

Frigidaire Dishwasher Energy Star blinking lights.

When I go to run the dishwasher I push the settings button and when I hit start all the lights just blink and the dishwasher doesn't start running. Any idea why this is?

Posted by on

  • nedarnold Mar 23, 2009

    How do you determine if the controls are locked?

  • cierrasmommy Apr 17, 2009

    I'm having the same problem. Load the dishwasher, go to start and the lights start blinking...

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hmmm...don't know why this worked, but it did. When the lights were flashing when I tried to start my Frigidaire dishwasher model#FDB1500LF, nothing would happen...just blinking lights, so I went to the house electrical panel, found the switch for the dishwasher, turned off & on again, and now the dishwasher works.
Go figure.

Posted on Oct 21, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 130 Answers

Check to make sure that the contrls are not locked.sounds crazy but i see it alot

Posted on Feb 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Find manual for DW80F600uts


Contact Samsung directly to request a manual.

Jan 12, 2015 | Samsung DW80F600UTS 24" Stainless Steel...

1 Answer

Kitchenaid dishwasher Kudio1il 24'stainless steel. Problem with control panel. Dishwasher will not start. Only NORMAL button, HI-Temp button, Energy Saver Dry button, and cancel button light up when...


I'm having similar problem.I uploaded video of my attempt to reset and problem that I have after.I've already tried replacing my board... but have the same problem. The board was a refurb... so not sure if the board sent was defective - or if the problem is the control panel or something else?? thoughts?https://www.box.com/shared/ef486b70331cd4462ed6

Oct 05, 2011 | KitchenAid 24 in. KUDI01FLSS Stainless...

1 Answer

Frigidaire 24" Built-In Dishwasher (FDB520RH)


Hello, ms

I was trying to help you out here. I was going back to some customers that asked questions in the past and it appeared that no one answered them, so I thought I would take some of my personal time to see if I can help. Here is a link to about everything you want to know about your dishwasher, from repair to trouble shooting it,pictures, video's. Just scroll around and you will see tons of information to almost any question you might have on your dishwasher. If you go to this link and click around, I am sure you will find out so much about your dishwasher, you will know more that the company that made it. Here Is the link for you to click on>>

http://home.howstuffworks.com/dishwasher.htm


Please if this helped you at all, if you can find the time to rate my help and some kind words written would be appreciated for my free help , I would appreciate it. Here is also my direct link to my own pages of other areas of my expertise for other problems you might have in Automotive,Appliance, and Electronics. Drop In anytime for my help. Thanks,Mike

http://beta.fixya.com/users/mc1bean

Sep 19, 2011 | Frigidaire 24 in. PLD2560LCC Energy...

1 Answer

Green light is blinking over "start & resume"


It sounds like he didn't run it completely through try holding the cancel button down for a few secs.

Mar 22, 2011 | Magic Chef DU6500 Dishwasher

1 Answer

Machine won't start


This unit has a safety feature. You must close the door within 3 seconds of pushing start. So push start then immediately close the door wait for a few minutes and it should be running.

Apr 20, 2010 | KitchenAid Architect® KUDC03IT Built-in...

1 Answer

Dishwasher starts randoming blinking ER message


Call an factory Authorized service company in your area.. New house your move in date will be the DOP... and its cover for a year.. .ER error is a touchpad error... check your dishwasher install it must have an 1 inch of space at the top... I know it will not looks as good but this dishwasher MUST have an inch between the top and the counter...let me know if it helps

Oct 04, 2009 | Frigidaire 24 in. PLD2560LCC Energy...

1 Answer

My Trionr XL dishwasher will not run. I push the


It sounds like your dishwasher might be locked. You unlock the dishwasher by pressing the "heated dry" button for three secs. and then releasing it, that should do it.

Jul 04, 2009 | GE Tritonr XL GSD6260JCC Dishwasher

2 Answers

''Clean'' light is blinking, ''Cancel'' does not reset the cycle.


If the clean light flashes 7 times, pauses, then repeats...

When the dishwasher doesn't sense a water temperature increase, it stops working and locks the functions (clean light flashes 7 times, all buttons are non responsive). It does this as a safety in case the element is broken and feeding electrical current into the water.

To resolve this you will have to reset the console. Do this by closing the door and press these buttons in sequence...

-high temp wash
-heated dry
-high temp wash
-heated dry

...all the lights will turn on briefly and the machine will start a diagnostic cycle. You can press cancel or let the diagnostic cyle finish (1-2 minutes).
You should now be able to run the dishwasher as normal.

If the issue returns, you could have a problem with the heating circuit (ie. element, thermostat or wiring).
It rarely happens but it could also be the door switch not engaging properly when the door is closed (slightly bend the door latch down making sure it doesn't hit the door when you close it).

Good luck!

Apr 01, 2009 | Whirlpool 24 in. DU1055XTP Built-in...

1 Answer

The flashing light blinks 7 times on the clean indicator area , but the dishwasher will not function and when you press cancel it starts running but nothing washes through any cycle at all. please help


ok well usually it is not sensing a temperature change in the water or not getting hot enough. so you can reset the dishwasher and try running the hot water in the sink before starting the dishwasher. if it fails again there is a heating element and control board kit that would need to be installed. you can reset the dishwasher by pushing "high temp wash" and "heated dry" back and forth until all the lights light up then you can hit the cancel and drain button twice.. put detergent in and run it.

Mar 04, 2009 | KitchenAid Dishwashers

Not finding what you are looking for?
Frigidaire 24 in. PLD2560LCC Energy Star® Built-in Dishwasher Logo

1,739 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Dishwashers Experts

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Carmen Mikulic

Level 2 Expert

409 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Frigidaire Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...