Question about Vehicle Parts & Accessories

1 Answer

I have a car fitted with a Clifford GS 470 alarm but I cant get the alarm to stop. The car that this alarm was fitted in has not been started in 5 months and so the battery ran flat. I replaced the battery and once I did the alarm started and would not stop. I have tried both remote controls (I think the batteries on the remotes are working ok as the blue light on the remote works). I also keyed in the valet code (I think it is the correct one) but the alarm will not stop.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 95 Answers

You might have to replace the batteries in the remotes. The reason why the alarm is going off because once you plug power back to the alarm brain it sets the alarm off and the only way to make it stop is to hit the unlock button the remote. Make sure all connections on the alarm brain are good and try changing the batteries in the remotes. also might have to reprogram the remotes to the brain if it has been sitting for awhile.

Posted on Feb 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

GTI. How can I get my Clifford alarm to operate the central locking?


My best advice is to contact clifford direct and explain your problem normally very helpful.

Mar 02, 2016 | Seat Ibiza Cars & Trucks

2 Answers

Clifford g5 alarm how do i reset it after i was checking fuses it wont let me start the car


The car won't start because the Clifford alarm has a starter interrupt wire where the start wire runs through the alarm system module/relay. The unit then must still be active for the car not to start. If pressing the disarm/unlock button on your Clifford key FOB does not turn the system off, you will after to do it manually. You will need to locate the manual override button installed somewhere in the car that is connected to the alarm system. Turn the ignition switch to "on" or "run" and within 10 seconds press the manual override switch. That will turn the alarm system off and allow the car to be driven normally. I would then take the vehicle to an authorized Clifford or other DEI (Viper) install shop and have them diagnose your apparent problem.

Jul 31, 2014 | G5 IntelliGuard 770 P/N 919621 Car Alarm

1 Answer

I have a 1995 audi coupe thats fitted with a clifford alsrm and immobiliser. is it possible to disable it?


You could go under the dash and try and find any aftermarket wires connecting to the ignition harness that may be able to be disconnected. I would try the heavy gauge red wires first. (make sure car starts afterwards). But to have a draw that strong there is more than likely another issue.

Nov 04, 2013 | Vehicle Parts & Accessories

1 Answer

Lost key to alarm


You will need to contact Clifford and provide the alarm unit serial number and some other details, they should then be able to send you a new key. Failing that, call a car recovery service (AAA, RAC ADAC or AA) they can usually help.

Jul 21, 2013 | Clifford 507X Security alarm + Remote...

1 Answer

Clifford alarm


check the internal battery of the alarm as it may be getting low on charge.

May 30, 2013 | Vehicle Parts & Accessories

1 Answer

I need a Clifford 50.7x installation manual


go to www. fitnessmanualsonline.com and download for freeGod bless youcreateLink

Dec 14, 2012 | Clifford Matrix 50.7X - Car Alarm with...

1 Answer

What causes electrical components to stop with car running


Interference with frequencies,Khz, Mhz, Ghz.etc,such electric motor, Noise, and other devices,sensors.
You must go to the repair shop for Scanner , and diagnostic devices

God bless you

Sep 06, 2012 | Clifford 925.2X - 5-Channel Car Alarm...

1 Answer

Clifford alarm 7000 how to fix troubleshoot


snap , they are **** , cant even start my nissan , it just keeps locking and unlocking the car ....and nothing ggrrrrrrr

Dec 13, 2009 | Vehicle Parts & Accessories

1 Answer

Car alarm wont turn off


Try changing the batterys in the remotes mate

Feb 16, 2009 | OEM Systems Vehicle Parts & Accessories

Not finding what you are looking for?
Vehicle Parts & Accessories Logo

Related Topics:

306 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vehicle Parts & Accessories Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13571 Answers

Brad Brown

Level 3 Expert

15133 Answers

Are you a Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...