Question about SansuiS3275 TV

1 Answer

Sansui TVM1300 13 inch TV - Set Auto Channel does not work. I go into the Menu and start Auto Channel and it does not find any channels. Yet I can manually enter the channel number and it will go to that channel. Also, Channel UP/DOWN goes thru a list of favourites. Is there a way to RESET the list to include all channels? I can use a MENU function but that will be tedious to Add EACH channel. This Sansui model is lost without its remote control so don't every lose the remote control.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Sansui Master
  • 74,871 Answers

Sounds like AFT, AGC voltages are not proper. Contact any service technician. The main board of your TV has to be troubleshooted.
If the main system control memory IC is bad, this kind of fault can occur. This is a very small IC; have 8 solder terminals, and can be located very near to the main system control-chroma IC. Check and replace it. Be sure to replace it with the same number printed on it; in all respect. Otherwise, it won't go. http://electronicshelponline.blogspot.com/ Before replacing it, try a reset to this set, and then check.
There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here.

Posted on May 19, 2017

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
snakehead
  • 1074 Answers

SOURCE: Is there a way to access the T.V. menu without a remote?

YES YOU HAVE TO PRESS THE CHANNEL UP AND VOLUME UP TOGETHER OR THE CHANNEL DOWN AND VOLUME TOGETHER.THEN THE MENU WILL APPEAR AND DO WHAT YOU WANT TO AFTER,GOOD LUCK

Posted on Mar 26, 2007

Pookeybrain
  • 51 Answers

SOURCE: 1999 sansui tvm1915 tv

You'll most likely need a Sansui remote made to work with your specific model TV. I have similar problems with my Toshiba TV. Check eBay.

Posted on Nov 10, 2007

  • 1 Answer

SOURCE: manual buttons on set will only accept 3 channels

found solution by holding down both volume buttons at same time which enables on-screen menu allowing to select channel auto program

Posted on Dec 07, 2008

  • 280 Answers

SOURCE: Up and down channel selection is not working.

From the menu select auto tune and scan the channels back into memory.

Posted on Jun 19, 2009

joez47
  • 61 Answers

SOURCE: Have a sansui tvs273 tv. Need to switch it from

If your set does not have a menu button built into the set your out of luck unless you can find a replacement or universal remote.

Posted on Sep 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Connecting a sansui 13 inch to a converter box


1) Connect the converter box to a good digital TV antenna and position the antenna as high and as close to a window as possible.
2) Set the converter box 'output switch' to an unused channel for your area. (Usually 2, 3 or 4.)
3) Connect the output of the converter box to the 'antenna input' on the TV.
4) Turn on both units and set the TV channel to the same output channel selected above.
5) Now select TV channels using the converter box remote only. The TV should receive all converted channels on the preselected channel.
6) Adjust the TV antenna for the best reception for all channels.

May 04, 2014 | Sansui Televison & Video

1 Answer

My TV picture is not coming in and neither is all my channels.


Perhaps you have the TV set to receive analogue TV rather than digital (DBV). Consult the manual about receiving a digital signal.

Jan 21, 2014 | Sansui 19 in. LCD TV

1 Answer

Hdlcd19wb series a - How do I get the channels in digital, rather than analog? I can't even click on the "dtv signal" option in the menu. All the channels listed to add or delete are analog.


Put the HDLCD19WB on a channel. Press menu on remote. Select channel on the sceen. Press enter on remote. Select auto channel memory on the screen. Press enter on the remote. Use the right arrow button on the remote to set the signal type to air for antenna or cable. Select automatic search on the screen. Press enter on the remote. Wait for search to finish. Check channels with the channel up and down buttons on the remote.
If you have any digital channels you should have them now.
The dtv signal option in the channel menu is only available when tv is tuned to a digital channel.

Jan 01, 2011 | Sansui HDLCD-1900 19 in. LCD Television

1 Answer

My sansui tv is hooked up to my cable; it gets channels 4 - 13 beautifully...but nothing else. how do i program it to receive the rest of my cable channels? It's a 2004 tv.


you need to go into the menu section of your tv and find the channel auto program and let it start and finish completely {the menu should go off it self when its done} then you should be good.

Jul 17, 2009 | Sansui DTV2760 27" TV

1 Answer

My TV says "DIGITAL CHANNEL STRENGTH IS LOW" even though it is connected to a RCA ANT1450 antenna.


I just looked at a TV last night for this. I don't know what you've tried yet, but I was getting that message until I went into the menu and selected the automatic channel scan. I forget what it was actually called, but you'll find it. After that, 19 digital stations came in beautifully with a cheap set of rabbit ears. (The scan will also find analog channels, which you can delete later on.) Good Luck.

Jun 12, 2009 | Sansui 27 inch TV

1 Answer

Switching singnal


If you are using an antenna or regular cable without a cable box, put the tv on an analog channel. Go into the menu. Select the middle icon at the top of the screen. Go down to the TV/CABLE line. Select either TV (for antenna) or CABLE (for regular cable) on the right. Go down to AUTO CH MEMORY and press the volume+ (right arrow) button. Wait for the channel search screen to clear. Check all of your channels using the channel up button until you come back to the channel you started on.

Feb 28, 2009 | Sansui 27" TV

1 Answer

Sansui HDLCD1908 not recieveing Digital channels


Go into the menu. Go to CHANNEL and press enter. Go to AUTO CH MEMORY and press enter. Press the right arrow on remote to change the signal type to AIR. Go down to AUTOMATIC SEARCH and press enter. Wait for it to finish on its own. You should have all the analog and digital channels you can get with the antenna setup you have connected to the tv.

Jan 06, 2009 | Sansui 19 in. LCD TV

1 Answer

Manual buttons on set will only accept 3 channels


found solution by holding down both volume buttons at same time which enables on-screen menu allowing to select channel auto program

Dec 07, 2008 | SansuiS3275 TV

1 Answer

Set up a channel ( 2,7,8,9,10,sbs ) on TV sony LCD


If you want to set up tv channels in your tv, connect antenna cable in RF Input at rear of tv, go to tv menu and select preset, then press auto-preset and rest will do tv itself.

Sep 18, 2008 | Sony BRAVIA KLV-40U100M 40 in. HD-Ready...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sansui Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74871 Answers

matt martin
matt martin

Level 3 Expert

1213 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Sansui Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...