Question about RCA RCR311B Remote Control
We have tried the Direct Code Entry as well as the Manual Code Search. We do understand the directions, however, entry will not connect. We think that possibly it is not compatible.
Try these codes for Magnavox..
002, 009, 109, 118, 309, 402, 408, 502, 508, 510, 807, 917
Hope this will help you.
Posted on Feb 16, 2009
Tips for a great answer:
Aug 23, 2013 | RCA RCRN04GR Remote Control
Feb 24, 2013 | RCA RCR450 Remote Control
Oct 15, 2011 | Remote Controls
1* Press and hold the CODE SEARCH button until the
red indicator stays on, then release the CODE
2* Press and release the desired mode button (TV,
VCR, etc.). The red indicator blinks, then stays lit.
3* Enter the 4 digit code from the code tables (on
separate sheet). Note: after a valid code entry, the
red indicator turns off. For an invalid code, the red
4* With your device on, press CHANNEL UP. If the
device responds, no further programming is required.
Note: If some buttons do not operate your equipment,
try one of the other codes for your brand
Jul 02, 2011 | Philips Remote Controls
Mar 05, 2011 | One For All URC-3021 Remote Control
1 Download or view the user's manual from the Magnavox website (see Resources). You will need the list of codes included in the manual. The website will direct you to the closest remote control manual available similar to the REM 350 Universal Remote. This manual is compatible with the REM 350 Universal Remote.
Press and hold the "Code Search" button until the red indicator light stays on. Release the "Code Search" button.
Press and release the "Mode" button for the product you wish to program (TV, VCR, DVD or satellite). The red indicator light will blink, then stay lit.
Enter the four-digit code from the code tables listed in the user's manual. You can also search for the code online at the Philips Universal Code Finder page (see Resources). You might have to try several or all codes listed in the manual until you find the correct one. After a valid code entry, the red indicator will turn off. With an invalid code, the red indicator flashes.
Press the "Channel Up" button with your device on (TV, DVD, VCR, or satellite). If the device responds, you have completed the programming. Once are certain you have found the valid code, make a note of it somewhere so you will not have to search for the code again.
Jan 14, 2011 | Philips Magnavox REM-350 Remote Control
Aug 24, 2009 | Philips SRT9320/10 Prestigo 20-in-1...
Oct 24, 2007 | RCA Universal Remote 3 Device Remote...
83 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: