Question about Saeco Easy Espresso Machine

1 Answer

Both green lights flashing.

My unit has both light flashing, just like when the unit is warming up, but two of them are flashing green. The last expresso did not complete, and the water did not come through.

Posted by on

  • 1 more comment 
  • jim1740 Feb 16, 2009

    Found out from Saeco that it had overheated. Let off steam and it works again. If it happens again, will check thermostat and water heater. Thanks for help

  • Anonymous Mar 17, 2014

    The green light keeps flashing and coffee Luke warm

  • Anonymous Mar 19, 2014

    THE BREWER ON THE UNIT FIRST STUCK AND WONT DO ANYTHING FURTHER

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 121 Answers

Check thermostat,water heater.

Posted on Feb 16, 2009

  • glennteeter1 Apr 20, 2011

    Usually when both green lights are flashing the user has switched from steaming mode back to espresso mode. Protocol would be to open the steam valve fully and release excess water out of the frothing wand. After a moment the left (espresso) light will light steadily. Machine is now set for espresso.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a bunn cwtf twin,I put new ready lights on both side work for about a week and the they wont light up. and the side the the faucet only brews warm coffee. but the other side does find. HELP


The green ready lights do not last that long. We never replace them on units we service. They are cheaply made. Each side of this coffee maker has its own thermostat. Check to make sure the thermostat is on all the way. If it is check the voltage on the warm side. Make sure it is in the 208v area. This warm problem is 85% the thermostat not set right and or needs replacing.

Apr 28, 2014 | Bunn CWTF Twin TC Coffee Maker

1 Answer

New rancilio epoca s tank I turn on the switch 1, the boiler is filled and is activated. ok once the boiler is filled i turn resistance switch 2 ...but it doesnt work.


It should take about a 1/2 hour to warm up, are any lights flashing? Is the light on the second switch green? If not you might want to take off the left panel and find the thermal reset. Its mounted to the top side and has a little red button facing you. Press that to reset the unit.
Goodluck!
Mikey@espressomachineexperts.com

Feb 24, 2011 | Rancilio Epoca ST-1 Espresso Machine

1 Answer

PURCHASED B44 TODAY. CAN'T DO SET UP. PLUG IN, POWER UP, BOTH CUP AND MUG LIGHTS LIGHT UP (NOT FLASH) HEAT LIGHT FLASHES GOES OFF-TOP OF UNIT WARM. WATER DOES NOT TRANSFER TO UNIT. REALLY LOOKED FORWARD TO...


We just had the same problem with ours, and solved it by lifting up the grey handle to open the coffee maker, and closing it again. Not sure what the issue was, but this got the single cup light flashing the way the instructions said it should.

Dec 24, 2010 | Keurig Elite B40 Coffee Maker

1 Answer

! light flashing... machine won't brew coffee - when i press the button to make espresso nothing happens.. I've tried all the troubleshooting options - nothing works.


The machine is sensing one of the following is not properly fitted in.
Check bean lid, brewing unit is properly latch in, dreg drawer and tray is in, and water tank. And make sure the knob is in off position. If all those are properly in ..the green light will start flashing and warming up. When it reaches the working temperature it will start rinsing and it's ready to use.

Oct 11, 2010 | Saeco Odea Giro Plus Coffee Maker

1 Answer

The central unit LED blinks green and the machine does not turn on


Hi
The LED should be blinking red not green on a magic delux. The only green light is the boiler light for warming up or ready. If its the brew unit light it means its missing.
Open the door on the right. The brew unit is the thing with the handle that has the “press” on it. You need to push on the upper left side of the brew unit until it clicks. There is an outlet spout on the opposite side of where you are pushing. It goes into an intake port that needs to be lubed, so the outlet spout will slide in without pushing back. That should take care of the missing brew unit.

Apr 09, 2010 | Saeco Magic De Luxe Espresso Machine

3 Answers

Gaggia Syncrony won't heat up.


I switch the machine on and the green light (number 24) flashes to indicate it is warming up but it never gets there it just keeps flashing for at least half an hour.

Dec 31, 2009 | Gaggia Syncrony Logic 74884 Espresso...

1 Answer

Load the circuit


Hi
It means you need to prime the lines. Push the button for water, then open the knob on the right. When water starts to flow the red light should disappear, and start to warm up. If the red light doesn't disappear, you may have a restriction in the flow meter, or intake line.

Nov 08, 2009 | Saeco Incanto Classic Espresso Machine

1 Answer

Does not warm up


HI
If you don't have any other lights on, it could be 1 of 2 things. Your boiler is bad or your power board is bad. Can you get steam or hot water?

Oct 25, 2009 | Solis Palazzo Espresso Machine

5 Answers

Saeco Italia SUP021 YR green lights and red water light flashing


You can't manually reset. The machine will have to do it. I had the same problem, two green flashing lights with one red (water) all 3 would just keep flashing and not turn solid. No coffee can be made or hot water. I could not pump prime. The problem was the steam wand was blocked with old milk residue. It needs unblocking or you will never pump prime. I could not unscrew the steam wand...so I let it sink in a glass full of hot water for a few minutes and then turned the water knob counter clockwise to push out the softened residue. After that, everything was good. When water started flowing out of the steam wand, the red light turned off and the green lights turned solid. The obvious answer to why you can't pump prime is there is a blockage somewhere and best to start with the steam wand. --Mabada

Sep 14, 2009 | Starbucks Saeco Italia Digital Barista...

Not finding what you are looking for?
Saeco Easy Espresso Machine Logo

Related Topics:

593 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saeco Coffee Makers & Espresso Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

eyecam

Level 2 Expert

86 Answers

Ray Murphy

Level 2 Expert

67 Answers

Are you a Saeco Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...