Question about Panasonic PT-47WX49 47" Rear Projection Television

1 Answer

Convergence problem on a panasonic 47wx49e

My wife's friend called me stating that her mother's panasonic 47wx49e is no longer in convergence, after it was moved on a 20 mile trip from one location to another.
What are the initial steps to reconvergence, if any and should I order a service manual for it before starting the trip over to the set's location?
I am not real familiar with the model and don't know if there are remote adjustments. I also don't know how rough of a trip it was for the move to assume bad IC's or make any assumption yet.

Posted by on

  • mkmullett Feb 16, 2009

    You totally missed the question. I have a degree in electronics, an owner of an audio/video company that builds large pro systems, and have replaced and repaired various electronics down to a component level. I have converged Barco, panasonic and various other pro projectors running into the $100.000 and up range for major venues that you might have visited.

    I can order a service manual, I am just trying to get pointed in the right direction before I drive all the way over there.

    I am wondering what convergence settings are on the remote.

  • yurem_20 Feb 19, 2009

    how can I fix the convergence on my tv the red is crook



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

I would send a repairman out just to be on the safe side. if you arent sure what you are doing you can only make it worse than it already is and i dont think you want to do that. if you arent familiar with the tv then call a repaiman

Posted on Feb 16, 2009

  • Ronnie Houston Feb 17, 2009

    if you know so much why would you have to ask a question like that on here? if youve done so much you should be able to fix the set with your eyes closed. i wasnt inappropriate in my answer to you but it appears that you think i missed the question and i went only by what you typed and answered it or what i thought your question was;...good luck on trying to fix her tv



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Panasonic PT-47WX49E blue convergence problem.

if convergence does not adjust in menu mode could be a defective convergenceic or fuse

Nov 11, 2009 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

Mt pt-47wx49e is showing a blurry picture that bounces and waves. ive tried adjusting the convergence on the set but dont have a remote and its tricky to do on the set top controls but i dont think its...

Convergence chip could be lose as in solder joints bad sometimes a good slap on the TV side will straighten this out temporarily but not recommended. A service call is the best fix unless your handy at taking it apart and resoldering the chip you can find convergence kits online if you are the handy type :)

Sep 29, 2009 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

Red horizontal convergence PT-47WX49E

converge outputs getting tired or limiting resistors opening up. adjusting this incorrectly will make the situation worse keep in mind that overdriving these chips will cause a fold over of your image when you see this carefully adjust in the opisite direction as you may be overheating the outputs

Oct 08, 2008 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

Panasonic pt-47wx49e the green line color his curved in the middle of the screen can not converge

You need to replace both convergence Ics and the six 2.2 ohm 2watt resistors. The Convergence ICs are STK392-110 you can get replacement ICs and resistors at the following link with free instalation instructions. Here is the link.

Aug 09, 2008 | Televison & Video

1 Answer

Green rainbow streak on bottom of TV PT-47Wx49E

If Convergence on setup dosen't work, And you think its not STK Convergence chips!, Then "Yes" It more then likely will have a few open Resistors!... (Near STK chips)

Jun 24, 2008 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

Blue ghosting on Panasonic PT-47WX49E

your convergence IVs need to be replaced. Its an easy repair if you can solder. you can get the two ICs you need at the following link. they also provide free installation instructions and free on line tech support while youre doing the repair. You need two ICs they are numbers STK392-110. Let me know if I can be of further assistance. I am one of servicemanuals support techs and board rebuilder.

Apr 11, 2008 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

Panasonic PT-47wx49E

you have to go into service menu to reset convergence after changing ics.I never posted this because if you do not know how you can shut set down.which chassis do you have ? There is 3 diffenert ways to enter into service mode for convergence.

Apr 05, 2008 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

Panasonic Projection TV PT-47WX49E convergence ...

may not be convergence may be a bad stk for convergence if that style if so try stk

Oct 28, 2007 | Panasonic PT-47WX49 47" Rear Projection...

47 Answers

PT-47WX49E Service Manuals

scott iam in need of one too would you PLEASE add me to your list Thanks so much

Apr 11, 2007 | Panasonic PT-47WX49 47" Rear Projection...

Not finding what you are looking for?
Panasonic PT-47WX49 47" Rear Projection Television Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts


Level 3 Expert

5342 Answers


Level 3 Expert

508 Answers

The Knight
The Knight

Level 3 Expert

75169 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides