Biz Hub 250 Setting up Scan Button & Resetting password
How is the Biz Hub password created? I know how to get to it on the internet to change the scan button but I don't remember the password that I originally choose. Is it the login to my computer and would I have to create a whole new scan button to change it?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I have 5 biz hub 654s. There is no "utility" hardware button. Instead, open the front cover (marked "biz hub 654") - switch off the main power - white switch in an orange rectangle. Wait 30 secs. Flip back on- then QUICKLY close the door while holding down the yellow RESET button. "Trouble reset" appears - tap it - OK appears below it. Use main power to power down. Wait 30 seconds. Power back up. Works every time.
the email server address may have changed
touch the utility counter button the the administrator button
touch network setting
touch email setting
touch fwd button
check to see if the host address is correct for email server
or check the email one touch button settings To edit a one-touch E-mail address: 1. Press utility/counter. 2. One touch user box registration. 3. Create one-touch destination. 4. Address book. 5. Email. 6. Select the E-mail address. 7. Edit. 8. Then edit the address
Hi I am former Konica Tech Support for 26 years. I do some network problem. Y may need to upgrade the copier memory. or this just simple setting. on the printing side I can assure you no problem. there is a setting on the operation panel choosing if you prepared pdf when ever you to e-mail, scan to box or scan to SMB. You can delete the old print driver and the control panel delete your even the printer Icon at the printer and fax folder. Re install the printer and the printer driver. And make sure send a test print. If so happened that you don't have the print driver you can go to Konica web site and download the print driver. There are many kind of print driver. postscript driver and etc. I hope this info will help you and if not you may contact me again.