Question about Teac Legacy DR-L700 DVD Player

2 Answers

Teac DVD L700 Power Supply

I have just moved my surround sound system and now the power light is just flashing. Any one any ideas on why I cant switch it on? Seems like it has gone on lock out. Thanks

Posted by on

  • Claire Littler Aug 03, 2007

    Thanks for the above advice but have tried the power cable and have also tried a different socket.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 944 Answers

Unfortunately there is no information available online about this model and this fault. The flashing power light will almost certainly indicate clearly what the problem is - the only way to get a manual to find out the error appears to be to contact TEAC direct on; http://www.teac.com/consumer_electronics/CustomerService.html If you need help once you have the manual, please ask again :)

Posted on Sep 06, 2007

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 100 Answers

The only thing I can tell you is to check the cable if its plugged in correctly... wierd! might be electricity problem to where you moved it. Did you hit it while you were moving it?

Posted on Aug 03, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My pioneer surround sound system has stopped working cannot turn it on and the hdmi light just flashes


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
http://electro-medical.blogspot.com/

Dec 15, 2015 | Pioneer Audio Players & Recorders

1 Answer

Flashing Power Light


your surround sound system seem like having dry solder joint at PCB . one thing you can do is to open up the back cover first looks for dry solder joint ( if you can find ).if not just re-solder those solder looks very thin.it may help.

Aug 02, 2007 | Teac Legacy DR-L700 DVD Player

1 Answer

Problem with my xenta surround system


Check that your speakers are still plugged in correctly. I am guessing by what you are saying the high end speaker is blown but the bass is probable still coming through. If you can, remove one speaker at a time and check on another source. If the speakers check out fine then you have a bad channel on the system. A short will also disrupt the sound...just jiggling the wires at the connectors can usually lead you to the right area.

Jan 11, 2014 | Audio Players & Recorders

1 Answer

No power in surround sound system(DVD/subwoofer)


The key could be the word "move".
Electrical items can get knocked moving and something might have become loose or damaged inside the sub. So check it out. Inside too!

Feb 28, 2018 | JVC TH-C3 System

4 Answers

No sound from back surround speakers


We just hooked ours up and had the same problem, we switched around the s-air cards and that solved the sound problem immediatly.

Jan 11, 2009 | Sony BRAVIA® DAV-HDX576WF Theater System...

1 Answer

LG Surround Sound Troubleshooting


I have a lg dvd/surruond sound and the remote suddenly stopped working. I bought a new lg riginal remote but still nothing, any thoughts?

Jan 02, 2009 | LG LH-T754 Theater System

2 Answers

My 2001 Olds Integre will not start, but later does start.


This may be a problem with the ignition switch. The ignition switch feeds power to many of the different systems- including the starting system and the dash.A low voltage output of the switch will not allow the starter relay to engergize, along with many other odd problems. A way to check this is that when it is acting up, turn the ignition key back and forth very quickly many several times, or tap and the head of the key with a small hammer. These things will normally cause a faulty ign switch to correct itself for the time being.
http://www.greatautohelp.com/more_oldsmobile_questions.html

Oct 22, 2008 | 2001 Oldsmobile Intrigue

1 Answer

No signal on subwoofer out in Onkyo TX-SR703(E) - similar to TX-SR803


Hey Tad, I have the same problem and perhaps a solution. I just moved to the other SW "pre-out" and it seems to be working..the green light is on . Whatever works i guess.

Jan 24, 2008 | Onkyo TX-SR703 Receiver

1 Answer

Surround sound playback problem


1. do a hard reset to factory settings.
2. do a surround sound test to make sure all sounds are coming to all speakers properly
3. check the cable from the main unit to the sub for any obvious problems. ie. plugged in securely etc etc.

it sounds like the cable from the main unit to the sub is faulty

good luck

smeags.

Dec 31, 2007 | Zenith DVT312 System

1 Answer

580 ex speedlite


Turn on flash while pressing some of those buttons with good batteries

Try switching from Meter to Standard Mode and move head around.

Try move the flash head(flash tube) in Manual mode.

It's in electronic locked up because you're moving that flash tube zoom too much. 98% of photographers use that mode:-(

Alexander
atdlee@netzero.com

Dec 07, 2007 | Nikon Speedlight SB-800 TTL Flash

Not finding what you are looking for?
Teac Legacy DR-L700 DVD Player Logo

Related Topics:

218 people viewed this question

Ask a Question

Usually answered in minutes!

Top Teac Televison & Video Experts

JOHN TOPLISS

Level 2 Expert

166 Answers

Cindy Wells

Level 3 Expert

5528 Answers

Alun Cox

Level 3 Expert

2678 Answers

Are you a Teac Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...