Question about Washing Machines

1 Answer

My Candy washing machine has stopped working, I select the wash does not matter which, press the start button. The washing machine begins to fill then stops and wont go into the spin cycle a couple of times the 90minute wash light & the stain vanish light flashes when it decides to stop working. Help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

It appears your timer has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Candy washing machine gc4 2d washes for about 15" then stops for 30" (the screen goes black) then on again for about 10" and then stops again.


sounds like overload protection is disabling the machine. it could be caused by a lot of reasons, the only advice I have is to check for a jammed drum, empty machine and see if drum turns freely. best luck to you.

Dec 06, 2014 | Hoover Genuine Candy Zerowatt Washing...

1 Answer

How to reset candy go482


Try unplugging it for 10 minutes and press the start button while it is unplugged and that usually resets the system. If that does not work then you have a board or drain problem.

Aug 02, 2014 | Candy Washing Machines

1 Answer

Lg tromm manual


Problem is too much soap. Wrong soap. Press and hold: SPIN SPEED & SOIL LEVEL buttons--then press POWER button.
Wait for door to lock.

Press the START button (6) times--this will fill the tub with hot water to the maximum setting when it stops filling.

Press the START button two more times--this will enable the tub to tumble.
After 3 hours--turn "off" the washer.
Turn the washer back "on".
Select the shortest wash cycle (usually "quick wash") and press "START". This will rinse out the tub.

Jan 17, 2014 | Washing Machines

1 Answer

How do I clean my washing machine? My clothes and the washer have a mildew odor.


Add the entire packet of "TIDE WASHING MACHINE CLEANER" directly into the tub (no laundry) and close the door.

Press and hold: SPIN SPEED & SOIL LEVEL buttons--then press POWER button.
Wait for door to lock.

Press the START button (6) times--this will fill the tub with hot water to the maximum setting when it stops filling.

Press the START button two more times--this will enable the tub to tumble.
After 3 hours--turn "off" the washer.
Turn the washer back "on".
Select the shortest wash cycle (usually "quick wash") and press "START". This will rinse out the tub.
This method of "TUB CLEAN" is *not* from a service manual but has been the best method for cleaning out LG washers more than a year into incorrect detergent usage.

After this--use the correct amount of "HE" detergent & perform a "TUB CLEAN" cycle every (4) months using the *tub clean* option on the control panel.



themobilian_2839.jpg

Aug 18, 2011 | LG WM-2277HW Front Load Washer

1 Answer

My washing machine is Candy C435 T model.when i am filling the water it goes out directly without filling..Why?


Possibly the drain outlet is too low.
Try raising the outlet hose to a higher level, this will stop it syphoning out as it is filling.

Jun 06, 2010 | Candy AQW130 Front Load Washer / Dryer

2 Answers

Candy GrandO 8kg Erratic Cycle Selection and Flashing Lights


I can't solve this problem but have exactly same problem with erratic lights. I 'm starting to worry about possible explosion.

Mar 12, 2010 | Candy Washing Machines

3 Answers

Door lock , wont light up , therefor wont start washing.


Click on "Candy" (below FIXYA) on this website, type in your model No & search. You will get a shortlist; click on your model,below the page u will get Manual/Guides. Click on the blue, you have your manual on line.
You can also go to "troubleshooting" above, you are sure to find some solutions. And dont forget to rate me on this great site.

Jan 07, 2008 | Candy CNW136 Front Load Washer/Dryer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...