LOCKED UP ROUTER

The router doesn't send signals to a printer. The Linksys transmits a radio signal recieved by the wireless adapters on other devices, if your printer has wireless compatibility it must be setup on the printer, in the wireless settings. I don't think it's a Linksys issue. It a computer software issue. If you post the Computer Make, Model, and your OS, the Printer Make, mode,l I will try to help you. Is this the first time using the Printer?

To connect to your wireless router, the router's wireless settings needs to be configured with the SSID, encryption etc. and also the wireless cards in all the laptops/computers needs to be configured with these router's wireless settings. Then the laptops/desktop computers can communicate with your wireless router.
Connect a LAN cable from the Linksys to the LAN port on your computer.
Open a browser and enter the Linksys configuration URL
http://192.168.1.1
The default login = admin
The default PW = admin
You can protect your router by changing the default admin PW (write it down and put it in a safe place)
Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption to protect your wireless network and Internet from unauthorized access.
Now apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

1 If you don't have a switch connected to the router or if your other devices are not on the Wireless allowed list in the router whoever has priority on the connection will knock the others device off that is xbox, laptops etc. Because bandwidth is being decreased and the connection is giving first come first serve priority.
You will need a switch or setup each wireless device in the router .
Instructions:
. power router off
2.connect all three computer you want to connect.
3. start computers one at a time completely
4. check router for status light per computer to see if device is seen by router.
5. open web page to see if each computer is online.
7. do ipconfig / release/renew if not connected

1.Log into router
2. Verify wireless router name( on the computer) >>> ( on/off)
3.Note router name you are connecting to.
4.. Check the laptop do ipconfig /all to see current IP addresses.
5. Set the laptop up in the router by WEP KEY or MAC address.
6.Note router name you are connecting to.
7. Move the laptop about 20ft away and try to log on to the internet.
This is for all routers to set up wirelessly.

Hi. There is nothing you can do there that to reset the wireless router to its factory defaults and setup everything again. i have provided you a link on how to reset your router to factory default settings. Please click here.

Sometimes this problem occures when you install a later model wireless router.
Try installing the latest Wireless card driver on the XP computer and the LAN card drivers on the other computers except the MAC.

Hi,

For isolation purposes, you may want to test the printer through the Linksys router via Ethernet cable and see if you can print if it is wired to the router. From there, configure the wireless printer to match the settings on your Linksys router. Once done, try printing again wirelessly.

Tips:
1. Make sure that they are on the same LAN segment. By default the IP address of the Linksys router is 192.168.1.1. so you may want to configure your printer using 192.168.1.2 for them to communicate.
2. Make sure that the wireless settings on the Linksys router match the wireless settings on your wireless printer. Check the SSID/Wireless Network Name and Wireless Security. All wireless settings should be the same for them to communicate wirelessly.

Try deleting the printer from the PC then browse for network printers and set it up again....

If the first solution did not help, try calling Linksys Tech support or try this http://technicalsupport.blog.friendster.com

You bought a router for your printer? Or you have other computers you need to connect to the internet.

If you have more than one computer than you hookup (or connect wirelessly) your computers and then network yor printer so that document can be printed from any machine on your network. If this is not what you are looking for feel free to fill me in on more infomation.


http://compnetworking.about.com/od/homenetworking/a/routernetworks.htm


Try this link for help with networking your printer.

Connection should be from LAN port of Speedstream going to Internet port of Linksys router. That should be it.