Question about Maytag MAH21PDD Commercial Front-Load Washer

1 Answer

Is the maytag MAH21PDD commercial wash worth buying ?

I have older toploader commercial maytags about 15 y old and had a opportunity to buy a group of used MAh 21 about 7y old. I have heard that the neptune was a disaster for consumers but the commercial was actually a reliable/efficient machine. Is the coommectial model actually any different and is it a reliable machine. Any laundrymat owners have a track record or comment?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

I would have a look at the machines and give them a spin by hand to see if there is any noise in the main bearings or if possible get the owner to run a load through the machines and listen to the noise they make they should not sqeal or make a grinding noise.Also check the boot seals for mold or for any tearing.

Posted on Jun 17, 2009

  • maytagfixya Jun 17, 2009

    they are worth buying if they do not have any bearing noise.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Maytag Coin Washer can't select Cycle after putting in coins


check the coin mech
If it is turning on properly
check the selector itself.possibly the switch

Mar 18, 2015 | Maytag MAH21PDD Commercial Front-Load...

1 Answer

How to change digital amount on older maytag topload drop coinop


open service door,move switch and display will read 6-- (6 and the # of coins set for) use the buttons top and bottom to go up or down to desired amount

Feb 26, 2013 | Maytag MAT12CS Top Load Washer

1 Answer

MAH22PD


No water detected entering machine or pessure switch trip not detected.

Nov 24, 2012 | Maytag MAH21PDD Commercial Front-Load...

1 Answer

I need a correct Maytag part number or the Whirlpool part number for the pump. Anyone?


maytag is owned by whirlpool since like 2004 the part number i came up with for the model number listed is 25001052

Aug 11, 2011 | Maytag MAH21PDD Commercial Front-Load...

1 Answer

We have a Maytag toploading washer (SAV4655AWW). The stem holding the knob for the water level broke off. I think I need to replace the entire switch. Is this something I can do myself?


Yes you can do it.
For now just turn it with a plier until you buy a new knob or get one from another washer machine go to the lockal repair shoppe or the salvage place to get a replacement.
Vitally

Sep 09, 2009 | Maytag SAV4655A Top Load Washer

1 Answer

How can we troubleshhot a Maytag toploader that


You probably have something stuck in the drain pump. You will have to remove the hoses from the pump to extract it.
I can not be more help without a model number. Maytag builds several styles of top load washers. They all access differently.

Aug 30, 2009 | Maytag Washing Machines

1 Answer

Fuse blew on my Maytag washing machine. 1 amp only and others blow. Time to buy new or service?


yes.you can buy the switch assembly unit. it gets short and the fuse blows out.

May 04, 2009 | Washing Machines

2 Answers

Won't spin in final spin cycle.


transmission shot if it does everything else but spin,not worth fixing for the price of a transmission plus labor,just junk it and buy a kenmore,whirlpool top load-mike

Apr 28, 2009 | Washing Machines

Not finding what you are looking for?
Maytag MAH21PDD Commercial Front-Load Washer Logo

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Al Clark

Level 2 Expert

290 Answers

Todd Marr
Todd Marr

Level 2 Expert

77 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...