Question about Sony FD Trinitron WEGA KV-32FS120 32" TV

5 Answers

Blinking stand by light

Light on timer/standby blinking. tv picture turns on and off slowly. tried to unplug tv and and tivo and vcr and redo but nothing has helped. I have the same problem, the blinking stand by light blinks, I can turn on the TV, I can hear the sound and then the TV turns itself off after a few seconds. Do I need a repairman to fix this???

Posted by on

  • bharvey678 Feb 17, 2009

    Do you need to unplug the power cord from the back of the set to the powerstrip i have or just unplug the cord from the power unit

×

5 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 126 Answers

Ofcourse it no doubts about it that you need a repairman. Pls for godsake dont try to repair it yourself.
I will suggest you only one thing to try to repair it. turn on the tv and press its power button which is on TV for about 1min without leaving it and then suddenly unplug the power chord and then try to start it
have a nice day
pls rate me
thankyou

Posted on Feb 16, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 153 Answers

U must reset the tv by pressing the button u must unplug it and then do it

Posted on Feb 16, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,614 Answers

Hi there,

my i know the model of the tv.?

at the moment it is better to get a repairman. if you have no idea how to fix.

Posted on Feb 16, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sony Master
  • 6,487 Answers

For this type of problem its strongly recommended you ask a professional to fix this problem for your safety also...

Posted on Feb 16, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 848 Answers

Hard reset - Just unplug the power cord leave the unit disconnected for 30 minutes and plug the power chord to the unit and it resets the unit ......

Posted on Feb 16, 2009

  • gopinath pasupathy Feb 17, 2009

    yes you need to unplug the unit from power chord......then check the fuses around the power supply board is proper.....if it is burnt replace it .......

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No picture just sound


GO SETTING TAB AND FIND OPTION SET DEFAULT MANUFACTURING SETTING AND TRY

May 18, 2012 | Sony KV-35S42 35" TV

1 Answer

No Picture Stand By Timer Light is blinking


Have to try switching on the the channel through your remote control? Sleep timer maybe On

Mar 01, 2008 | Sony FD Trinitron WEGA KV-24FS120 24" TV

1 Answer

Tv will not stay on standby timer light flashing


On Sony the standby or red is for shutdown---

If you unplug the set and plug it back and turn it on and it repeats this look to see if the light is either constantly blinking or blinking a specific number of blinks---specific number would be an error code.

Apr 29, 2012 | Standard (CRT) Televisions

1 Answer

My Sony Trinitron TV 1999 (KV-32V42) made a strange popping sound and I lost both the sound & picture. When I turn it back on, the two red lights on the front of the TV(standby/Timer light & Stereo...


Hi,

The Standby/Power light of the TV blinks when there is any internal malfunction in the TV. The self-diagnostic function of the TV will cause the STANDBY light to blink or flash when the television detects an issue. The number of times the STANDBY light flashes corresponds to a specific issue.

Few examples are given below; some of the issues may be resolved without the need for service.
1 blink / 2 blinks / 5 blinks: - This indicates that there may be a power-related problem with your set.
3 blinks: - This indicates that there may be a power-related problem with your set. The set will need to be serviced to allow a technician to determine the specific issue that needs to be repaired. If the power light flashes three times in sequence in a Lamp TV, the lamp cover is not securely attached. Reattach the lamp cover to resolve this issue.
4 blinks: - This indicates that there may be a back light or lamp power problem.
6 blinks: - This indicates that there is some kind of audio problem with your set.
7 blinks: - This indicates that there is a temperature problem with your set. Please check to make sure that the air vents on the sides and back of the set are not blocked or clogged and there is adequate ventilation around the television. We recommend that you check and clean the vents periodically to make sure the set receives adequate air flow. If the problem continues, the set will need to be serviced.
8 blinks: - This indicates that there may be a video-related problem with your set. If the flash sequence is not listed above or the light continues to flash, follow the steps below to perform a power reset:
Try the following steps to check if the issue can be resolved.
Turn off the television.
Unplug the television power cord from the electrical outlet.
Let the television remain without power for 60 seconds.
Plug the power cord back into the electrical outlet.

If the television is plugged into a power strip or surge protector, remove it from the power strip or surge protector and plug it directly into the wall outlet. If the issue is resolved, the problem is with the power strip or surge protector and not the television.

If the issue continues to occur, service may be required.


Thanks for using Fixya.

Feb 04, 2011 | Sony FD Trinitron WEGA KV-32FS100 32" TV

1 Answer

Stand by\timer blinks,picture go out everytime it blink .


Blinking codes meaning:

  • Five blinks - AKB circuit (automatic kine bias), the timer/standby indicator blinks for about 30 seconds then goes to the self-diagnosis function. Something is wrong with the video. Check video out, Q705, 732, 761 and other components on the C board, also check Q218, 219, 220 on the A board. In addition, unit could be in IK blanking, try turning up screen slightly.
Good luck:

Dont forget to rate:

Jun 30, 2009 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Sony Trinitron Color TV KV-35V65 - No Picture, red light stand/by timer flashing


A reset won't fix this. The standby light should be blinking a repeated count with a 3 second pause inbetween. Post that count here. That will indicate the circuit/condition that is preventing the set from turning on.

Thanks,
Dan

Jul 18, 2008 | Sony KV-35V65 TV

3 Answers

On timer light blinks on/off tv does not turn on jvc av-32d502


Well, it sounds like the TV is in timer standby mode and thus preventing the TV to turn on or off.
  • Very simple thing you can try to reset the TV is to unplug it from the wall and leave it unplugged for about 5 minutes or so.
  • Next, replug in the power for the TV and see if the timer mode has been cancelled out.
Regards,

Feb 16, 2008 | Standard (CRT) Televisions

3 Answers

Timer/Standby light blinks but no picture or sound when power button is pressed.


I'm having the same problem. My stand-by light blinks 3 times though. The tv clicks as if it is going to turn on, but it never does. Is there a simple solution to this problem?

Dec 22, 2007 | Sony FD Trinitron KD-34XBR960 34" TV

2 Answers

Blinking stand by light


the cause of your problem is in the crt socket your tube may be weak.try to adjust the g2

Jun 19, 2007 | Sony FD Trinitron WEGA KV-32FS120 32" TV

Not finding what you are looking for?
Sony FD Trinitron WEGA KV-32FS120 32" TV Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68301 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Are you a Sony Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...