Question about Samsung LE32R74BDX 32 in. HD-Ready LCD Television

1 Answer

NO DTV CHANNELS

FOR SOME REASON MY TV HAS LOST ITS DIGITAL CHANNELS AND I CANT GET THEM BACK. I HAVE NORMAL CHANNELS BBC - ITV ETC BUT THATS ALL.IN SETUP - SYSTEM - SIGNAL INFORMATION - SIGNAL STRENGTH READS 0 BUT BIT ERROR LEVEL READS 10 - CAN ANYONE PLEASE ADVISE

Posted by on

  • 2 more comments 
  • audial1 Feb 16, 2009

    Thanks for your suggestion it is much appreciated but sadly there is no input button on the tv. I have had this tv for about 8 months with no problem and the channels were tuned in at one stage but rather bizare we just switched the tv on and the dtv channels had gone. Also my model is stated wrong it is an LE32R87BD. Once again thanks for your help.

  • Anonymous Mar 23, 2009

    DTV died on me - Analogue works, Sky comes in OK but Digital is frozen

  • Anonymous May 01, 2009

    i cant find any channells....and the button n remot control..d meniu doesnt work....

  • Anonymous Mar 13, 2014

    I can get BBC channels but all ITV channels saying no signal

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,214 Answers

There may be an input button on the remote, or on the TV, that allows you to switch from the standard ATSC tuner to the DTV tuner.

Let me know if you can't find it and I will dig for an owner manual. But the above should allow you to switch tuners and input sources.

Posted on Feb 16, 2009

  • Mark Egan Feb 16, 2009

    You've got a couple of buttons on your remote that may have inadvertently been pressed.

    First, there is a TV/DTV button which switches the TV between the two tuners (standard ATSC tuner and the DTV tuner).

    Second, is the MeNu button near the button circle at the bottom end of the remote. By pressing this, you have a number of signal sources to select from. Once you have selected the correct source, you press the EnTeR/OK button.

    I found a copy of the manual at www.samsung.com. Much of the info I am looking at is on page 31 of the English manual.

    Let me know what you find. And keep in mind, your antenna needs to be a good quality antenna, and the cabling good in order to receive digital transmissions. As opposed to the old way of broadcasting, with digital, it's either all or none. No snowy pictures.


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I HAVE AN AKAI HD TV DVB-T32W. When I started out first time, it autoscans but found no channel. press DTV or ATV, it,says "No channel. need to rescan". But nothing happens, thanks


Main system control memory IC fault. This is a very small IC; have 8 solder terminals, and can be located very near to the main system control-chroma IC. Check and replace it. Be sure to replace it with the same number printed on it; in all respect. Otherwise, it won't go. http://electronicshelponline.blogspot.com/ Before replacing it, try a reset to this set, and then check.
There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here.

Jan 09, 2017 | Akai Televison & Video

1 Answer

One for all universal remote i am trying to program my seiki television. I lost the original remote and the power button on the television is broken so I cant turn the television on


Always better to buy a genuine replacement. The problem is that if I remember correctly, Seiki don't actually make the television, which is why it never features in the Remote Code Lists. I have just checked three sites.

http://codesforuniversalremotes.com/3-digit-universal-remote-codes-for-tv/

http://removeandreplace.com/2013/11/10/universal-remote-control-codes-list/


Brand new original SEIKI seiki TV Remote control work for almost all ...

https://www.amazon.ca/original-SEIKI-Remote-control-almost/dp/B00BJ2MC0E
I gave my mother a sieki television for Christmas my two little girls are always using the remote and letting it drop so I needed to find a replacement remote asap.

SEIKI TV Remote Controls ' SEIKI Replacement Remotes for TV, DVD ...

https://www.replacementremotes.com/SEIKI/Remote-Controls/ ReplacementRemotes.com offers SEIKI remote controls for sale online including remote controls for TV and many more.
Google seiki remote control codes

Jan 09, 2017 | One For All Televison & Video

1 Answer

My lg plasma tv is cutting off the edges of the shows we are watching. I cant find a setting that will take care of it. Can you help


hmm normally these settings are found in the picture settings of the set top box or just a setting in the tv's picture settings now there might be an option to say fill screen that may work best for some or leave the tv in 16:9 some broadcasts may only be in 4:3 at times this is normal broadcasting and not much can be done unless the setting on the picture option is set to fill screen

Jan 08, 2017 | LG Televison & Video

3 Answers

LG 26LH2000 television. Last 2 days when I turned my TV on there was only sound, and black screen.


back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.
26359174-wxmxxsggneevie4j1gyznoid-1-0.jpg

Nov 16, 2016 | LG 26LH2000 26 in. HDTV LED TV

1 Answer

I have a 39 inch element tv i cant program the cable channels


Typically you can access the menu, select "tuner" or something similar, make sure you're selected either on CATV or ANT (or similar), then do a channel scan. Should be pretty straightforward. Oh, and make sure you actually HAVE cable. If it's digital cable, you may need an external converter box for it to work.

Feb 23, 2014 | Televison & Video

1 Answer

Would like to know the codes for a LG tv, Sony tv, and a TOSHIBA DVD ?


How to Program


Remotes With SET Button
1. Choose and press a device key i.e TV. LED will flash once.
2. Press "SET" Hold until the LED Lights up.
3. Enter the 4-digit Device code (refer code list).
4. The LED will flash once as each number is programmed at the end of the 4 digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process. If the first code does not work then repeat the process with the next.
5. Important - Some brands use other manufacturers to make their devices if the codes available do not work the try the MAGIC search function.


Remotes Without SET Button
1. Choose and press a device key i.e TV. LED will flash once.
2. Press and hold BOTH the CHANNEL UP AND VOLUME DOWN button until the LED Lights up.
3. Enter the 4-digit Device code (refer code list).
4. The LED will flash once as each number is programmed, at the end of the 4th digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process. If the first code does not work then repeat the process with the next.
5. Important - Some brands use other manufacturers to make their devices if the codes available do not work the try the MAGIC search function.


MAGIC SEARCH FUNCTION
1. The magic search function enables you to scroll through the entire code list one by one by pushing the on/off button. Each time you push the on/off button the remote automatically switches to the next code in the list and sends a signal to the device you have chosen.
2. Choose and press a device key i.e TV. LED will flash once.
3. Press and hold the SET button or if no SET button then hold BOTH the CHANNEL UP AND VOLUME DOWN button until the LED Lights up.
4. Enter the 4-digit Device code (refer MAGIC list) i.e TV is 0001.
5. The LED will flash once as each number is programmed at the end of the 4 digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process.
6. Start scrolling by pushing the ON/OFF button as soon as your TV or Chosen device turns OFF lock the code in by pushing the DEVICE key again.

Mar 27, 2013 | Televison & Video

1 Answer

My panasonic DMR-EZ45V will not auto -setup restart the dvb freeview channels it goes through the channel numbers but they do not download only the anologue channels download. it is connected to a...


I have one of these with the same problem. I couldn't find any others with answers but there are people giving answers about the DMR-EX75 showing the same problem due to power supply decoupling capacitor failure.
I just ordered a manual for mine from manualzone.com to try to locate the culprits. - Wish me luck!

Jul 25, 2011 | Televison & Video

2 Answers

Akai PDP4206EA lost tuner and video inputs


Mine died after a brown out. It turned out to be the main board. They're pretty hard to find.

JE

Aug 14, 2009 | Akai PDP4206EA Television

3 Answers

Need instructions to add TV button to AKB36157102


1. While pressing and holding down the TV POWER button, press the CHANNEL UP or CHANNEL DOWN repeatedly until your TV is turned on (or turned off if you had it on). 2. Release TV POWER button when the TV turns on or off. The remote's TV POWER button will now control the TV.

Jul 19, 2009 | Televison & Video

Not finding what you are looking for?
Samsung LE32R74BDX 32 in. HD-Ready LCD Television Logo

1,858 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69654 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

cce772000

Level 1 Expert

7 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...