Question about Zenith Z52SZ80 TV

3 Answers

Zenith dlp projection t.v. model#z52sz80 t.v. turns off randomly

Iur t.v. has begun to turn off randomly for no reason in the last week or so. Sometimes it will turn on and stay on for a few hours and sometimes it turns off in ten minutes. We are frustrated and would like to know if you know what it might me. The lamp light will blink red when it turns off and then as soon as the red light stops blinking you can turn it right back on and it runs perfect again but you never know when it is going to turn off.
Please Help
Shuler's ya please e-mail me at xR1Bulletx@aol.com if you fig out how to fix this, or maybe you want to buy mine and change some parts? haha ill sell it ot ya cheap.

Posted by on

  • 1 more comment 
  • pcambell225 Feb 23, 2009

    I am having the same problem with my Z52sz80 TV. It will randomly shut itself off, after the red light starts blinking? Do I need a new bulb, or a new module or both?



    HELP!!!

  • pcambell225 Feb 23, 2009

    tv keeps turning off. red light blinks, then turns off.

  • apub374v1 Mar 30, 2009

    zenith z52sz80, shuts off randomly, red light blinks 7 times then stops, then i am able to turn the tv back on. i have already reset the lamp timer and cleaned off the fan, but am still having the problem. Called Zenith tech support and all they said is for me to have a professional come out and service the unit. any input would be greatly appreciated. apub374v1@hotmail.com

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

This solution is for the zenith 56" DLP. Unplug the tv, either from the wall socket or the TV. While the TV is unplugged hold the power button on the TV for 40 seconds. This lets the excessive power drain from the TV. If this does not work call 1-800-243-0000. This is the number for their help line. This is the fix the tech gave me and it worked right away. Hope this helps and have a great day.

Posted on Feb 05, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Zenith Master
  • 5,138 Answers

The Fan could be going out CK it for alot of dirt or dust.

Posted on Feb 16, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Same problem, TV runs fine anywhere from 10 Mins to 30 then cuts itself off. After the first shut down the time between shut downs consistently speeds up. Power button hold and fan cleaning techniques didn't work for mine and would love to fix this problem. HELP PLEASE

Posted on Feb 10, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Our power was out for over twelve hours last night and I don't know how to reset it. It tells me to refer to manual but I can't find the answer. SM272


If you can find a pdf of the manual, most pdf readers have search functions that may make it easier to find what you're looking for. Search for "clock" or "time." Try to find a manufacturer's website for the pdf, rather than some random site that may have pdf's with embedded malware. That said, you can test your downloaded pdf by going to virustotal.com

Jan 09, 2017 | Televison & Video

1 Answer

I have a Emerson model LF391EM4 flat screen that when turned ON shut itself off after apx 10 seconds. It has never done this before, what can I try to do?


REBOOT IT BUT HOLDING DOWN ON THE POWER AND TURN IT BACK BUT HOLFD IT DOWN FOR ABOUT TEN SECONDS AND THEN TURN IT BACK ON

Jan 09, 2017 | Emerson Televison & Video

1 Answer

How do I bring the menu up on a zenith VCR combo without the remote


Without a remote control you can't. To select a suitable replacement remote control, you should be aware about the set up codes for your device brand. To know more about it, visit the sites linked here. http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/ Being there is no menu button at the front panel of your TV, without a remote control you can't select it's inputs. Universal remote controls are available by some online shopping centers too. Visit some of them.
Good luck

Jan 09, 2017 | Zenith Televison & Video

1 Answer

Problem I can't intall my product many times its turn off itself all my installation are well install with my blu-ray ARC tv to ARC Blu-ray are well install I don't understand why its turn off itself


The blue ray turns off or the TV? and what models?
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Jan 07, 2017 | Televison & Video

1 Answer

Zenith dvd5201 tray won't open. How do you remove case to release tray? I have unplugged and replugged and then held open/close for 5 seconds without success. I don't have local repair.


It sounds like the drive belt is slipping or a disc stuck.
Open the lid and send us pictures
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Jan 02, 2017 | Zenith DVD5201 Multi-disc DVD Player

3 Answers

LG 26LH2000 television. Last 2 days when I turned my TV on there was only sound, and black screen.


back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.
26359174-wxmxxsggneevie4j1gyznoid-1-0.jpg

Nov 16, 2016 | LG 26LH2000 26 in. HDTV LED TV

1 Answer

Samsung DLP HLS4266W


Check the fittings of the color wheel. Refer this site for more details.
http://electronicshelponline.blogspot.com/

May 17, 2013 | Televison & Video

3 Answers

Need instructions to add TV button to AKB36157102


1. While pressing and holding down the TV POWER button, press the CHANNEL UP or CHANNEL DOWN repeatedly until your TV is turned on (or turned off if you had it on). 2. Release TV POWER button when the TV turns on or off. The remote's TV POWER button will now control the TV.

Jul 19, 2009 | Televison & Video

Not finding what you are looking for?
Zenith Z52SZ80 TV Logo

2,185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71006 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Jaime Hernandez

Level 3 Expert

2271 Answers

Are you a Zenith Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...