Question about Toshiba 26AV502U 26 in. LCD HDTV

1 Answer

Remote Control wont open manue on new tv

Bought a new tv Toshiba 26av502u 720p pluged it in hooked it to the satlite cable brought up the manu to set it up the remote control wont open the manu tv says not receving signal from cable old tv works
help Randell Marsh

Posted by on

  • Anonymous Mar 31, 2014

    no remote and tv on cable 73andthe butons some times don k well I can use the menu How c I get to chanl 3 fr our new cble staion

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 360 Answers

Ensure the satellite receiver is turned on and the output from the satellite receiver is connected to the ant. in on the tv. on the remote control, press the tv button, then the menu button. from the menu, select settings, set input to ant. .

do this and let me know what happens so we can get this working

I will be available till 2:00am CST

clarkco

Posted on Feb 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have managed to switch my LCD Philips TV from analog mode into digital mode. As I pressed the menu button it has gone into start up mode. Does anyone know how to get it back into analog mode without a...


You need a remote with the i+ button. Go into the service mode by pressing 062596i+ and put the set into factory mode and then select STORE. After a reset of the power the tv will be in the normal analog mode.
Do NOT change anything else in the servcie manu, it ruins your television!!

Feb 26, 2015 | Philips Flat Panel Televisions

2 Answers

Toshiba 26AV600T When turn off by remote control ( stand by lamp still illuminate) I can not turn on by remote ( ON/OFF in the same button ) Q: TV set OR remote is bad. Thank you /// Thongsuk. My Mail:...


Tries the tv manual control power button pushes a couple of times on/off,if tv it turn on and off with no problems.Yes.Than the tv remote have problems.Try Remotes.com to buy the original remote.

Jul 13, 2011 | Toshiba 26AV502U 26 in. LCD HDTV

1 Answer

Just opened up a panasonic TC-L32C3 from its box, pluged it in and the remote (with brand new batteries) wont turn it on. I am able to turn it on manually and went through the initial on-screen set up...


Yes,the tv manual controls board infered signal light from the LED diode,to the tv have problems.Take the tv back where u bought it and exchangce it for another new tv.

May 21, 2011 | Flat Panel Televisions

1 Answer

I own a Toshiba 26AV502U and the TV volume automatically lowers as if I was holding the respective button. Last night I had no issues but today this problem first surfaced. I checked to see if it was a...


hi
first is your tv hooked on some converter cable hd device if so this unit could cause the problem if not you will have to replace the main module. This kind of problem is very rare on this type

Sep 28, 2010 | Toshiba 26AV502U 26 in. LCD HDTV

1 Answer

Cannot get to manu


must have original remote. try remotes.com. if not you can always try a harmony or hometheater master remote.

Jul 02, 2009 | Sharp Aquos LC-37GD6U 37 in. LCD HDTV

1 Answer

I WANT TO CHANGE MY SONY TV IN THE SERVICE MODE FROM PAL I TO BG. WHAT DO I DO?


Hi,
    The method you are talking about is present in MAIN MANU . PAL,NTSC etc are video singnals system and BG,DK,I etc are audio signals system and both are in manu of the set.

     As far as concern you require the method of entring service mode. It is given below :

ENTERING SERVICE MODE:

In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below:

DISPLAY---> CHANNEL 5----> VOL (-)--->POWER

Note that this differs from entering the service mode (volume [+]).

Thanks for using fixya.

May 13, 2009 | JVC GM-V42 42 in. Plasma Television

1 Answer

LC32SH20U Please wait screen


I have had many problems with these unit with internal cables being loose or not seated properly. This is most likely the case, or the unit has a bad main. BD. If is new you can probably exchange the unit where you bought it, or contact Sharp and they will set you up with an auth. service center to correct the problem.

Jan 13, 2008 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

Not finding what you are looking for?
Toshiba 26AV502U 26 in. LCD HDTV Logo

200 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68197 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Toshiba Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...