Question about Mitsubishi WD-62525 62" Rear Projection HDTV

1 Answer

We have sound but no picture i have sound but no picture. when you change inputs the word input is doubled up and distorted

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 846 Answers

There were not much info in the manual but it did suggest trying this.
1st- Unplug for a few minutes and then plug it back in. Or use the reset button look it up in the manual. MANUAL

2nd- Blank screen troubleshooting

• If you're trying to watch TV, change channels or press the ANTENNA button to switch tuners.
• If you're trying to watch something that's playing on a component connected to the TV (like a DVD or a VCR tape), press the TV
button on the remote, then press INPUT until you get to the correct video input channel.
• If you're trying to watch a component (like your DVD player or VCR), make sure the component connected to the TV is turned on.
• If you're trying to watch a component (like your DVD player or VCR), make sure the component is connected correctly.

Post back if non of these ideas work and explain if there are any lights flashing or changing colors on the front where the green light usually is. A fixya rating would be appreciated, thank you for stopping by Fixya!

Posted on Feb 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Peavey 16 fx


are you going from the board to a 'mic' input, or a 'line input' on the Mac? you will need to attenuate the signal to a mic input. try reducing output from the board by 50% and reduce the input level on the Mac by 50%, and see if the distortion is lessened or eliminated. From there balance board output to Mac Input until you find what sounds good outta the Mac.

Oct 16, 2013 | Music

1 Answer

My polaroid fxm-1911c picture is distorted, sound distorted with loud buzzing when I try to utilize the tv signal input jack, also the dvd player doesn't work


Looks like there are some partial defects in the TV and might need attention of a qualified service technician. Anyhow, make sure that the input cable, RC jacks and sockets all do not have any loose contacts. Go through settings and ensure that every set up is as it should be.

Aug 02, 2012 | Polaroid FXM-1911C 19 in. LCD Television

1 Answer

Tv went black, no picture, no sound, a buzzing noise.


I believe you just have to change your input settings by:
1. Grab the remote control of your TV.
2. Press the "Input, or Source" button on the remote control.
3. Toggle all the option you see under input option so that you can double check the correct input on your TV.

Jun 23, 2011 | Televison & Video

1 Answer

I dont get a clear sound even though the picture is clear


First of all take the Audio output from the LINE OUTPUT and connect to an external amplifier. If the sound is still not clear then it is possible that the fault is in the SIF section provided this is the sound distortion from a Tv program/cable program. If this is a DVD or DTH input then the distortion can be from these input units. So please confirm on them.
If the sound does not have distortion then the fault is in the OUTPUT of the audio amplifier in the TV, Possible the output IC or the coupling capacitor are defective.

Jan 21, 2011 | Televison & Video

1 Answer

Distorted picture.


Is the menu text clear on the screen, when it's focused correctly. Or is that also distorted.
If the menu text is OK then the picture signal is dodgy. could be due to a bad earth lead on the video cable.
Is it distorted on all signal inputs

Oct 30, 2009 | Panasonic PT-LB20U Multimedia Projector

1 Answer

Dvd plyer picture is distorted and no sound


Just go into the setting on the tv and change the video input,It maybe set to hdmi and you may need it on analog.(you can look at the manual for the settings

Let me know if you still need assistance




Please rate this a fixya

Jan 31, 2009 | Televison & Video

1 Answer

TV input from dvd player.


i have connect a phillips dvd hard drive to my plasma by the componet cables and i get the sound but no picture can anyone tell what i am doing wrong

Apr 02, 2008 | Televison & Video

1 Answer

DIstorted picture for 480p input only


Many set have two differant convergance settings one for 480 and one for1080 this is because when it changes mode the set runns a differant frequencys, what may have happened is you have a cold solder joint somewhere that takes this fifteen minutes to corect itself, might want to start by resoldering the convergance and high voltage curcuits

Jan 02, 2008 | Toshiba 57H81 57" Rear Projection...

2 Answers

Poor picture with hdtv Hitachi 37HDL52 plasma


What EXACTLY is wrong with the picture? Is it black and white? Green? not there? distorted? need info...

Sep 20, 2007 | Televison & Video

Not finding what you are looking for?
Mitsubishi WD-62525 62" Rear Projection HDTV Logo

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1207 Answers

The Knight
The Knight

Level 3 Expert

73086 Answers

Jaime Hernandez

Level 3 Expert

2307 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...