Is your PC dragging? Does your broadband
network creep along at dial-up speeds? Do Web pages take forever to
load on your smart phone? Don't wait! These fixes will get you back
into the fast lane.
your PC lost its pep? How about your network connection, your printer
or even your phone? Here's our guide to giving your gear new life.
Follow our tips and you can fire up your system and your other tech
Supercharge your PC's hardware
get top performance from your PC, use high-performance hardware. No
amount of tweaking inside Windows can give you the same kind of speed
boost that a few judicious hardware upgrades can. The most effective
way to soup up any computer is to start by updating the components
inside. Here we'll explain how to upgrade the two most vital
components: the RAM and the graphics card.
Before you attempt any of these upgrades, take precautions against
static electricity by moving your PC to a clean, uncarpeted workspace
and using an anti-static wrist strap to discharge any static
electricity from your body.
Upgrade your RAM
RAM is often the most cost-effective upgrade you can make to speed up a
sluggish computer. When a system runs short of RAM, it must swap the
overflow data to the hard drive, which can significantly slow
performance. Here's how to add memory to your desktop, laptop or
RAM comes in many flavors, such as DDR2 and DDR3. Newer
technologies offer faster performance, but most motherboards accept
only one type of RAM. Check your PC's manual to find out what type of
RAM modules you need and how you have to install them. RAM dealers such
offer handy online tools that identify the appropriate RAM for many PCs
and motherboards. Also, to take advantage of more than 4GB of RAM, your
PC needs to run a 64-bit operating system; Windows 7
is available in a 64-bit version and we highly recommend it.
begin, open your PC's case and look for the memory slots. In laptops
and netbooks the RAM slots are usually under a removable panel on the
bottom of the machine. To remove existing RAM, release the clips at
each end of the module so that it pops loose. With the slots clear,
gently but firmly insert the new module.On
a desktop machine, it's often best to seat one corner of the module
first and then press the other end into place. Once you've fully
inserted the module, the clips should close to hold the memory
securely. On a laptop or netbook, press the end with the metal leads
into place first and then press down until the clips snap tightly
around the ends.
For a complete guide, see "How to Upgrade Your PC's RAM
Replace your graphics board
Even if you're not a gamer, upgrading your graphics board can give your
PC a serious boost, since Windows 7 and Windows Vista both feature
fancy effects in their user interface. Though you can upgrade the graphics on some laptops
, in this article we'll focus on desktop PCs.
shopping for a new graphics board, select one that fits the slot on
your PC. In most newer systems, it will be a PCI-Express slot; some
older systems may have only PCI or AGP slots. Fortunately, graphics
card makers still sell products to fit older slots, so an outdated
motherboard need not be a total obstacle.With
your new board at the ready, open the PC's case and locate the existing
graphics card. Before attempting to pull it loose, remove the screw
holding it down and release any plastic clips on the motherboard that
may be securing it. Once the old card is out of the way, slide the new
board straight down into the slot until it is firmly seated and the
plastic clip on the motherboard has snapped tightly around it.Newer
PCI-Express graphics boards often use so much juice that they require a
special PCI-E power line from the computer's power supply. If you've
installed such a card, connect this power line (the board may have two)
before closing up the case. Then boot the PC and install the drivers
from the disc the manufacturer provided.
For more advice on choosing a graphics board, check out "Geek 101: A Graphics Card Primer
you run Windows XP, Vista or 7, you have a few really good ways to cut
out the fluff and make your operating system run more smoothly, quickly
and efficiently. By turning off unnecessary features and disabling
unwanted startup programs, you can get an instant speed boost.
Knock out the fat
-- yes, even Windows XP -- is loaded with effects that take up system
resources without delivering meaningful user benefits. If you turn some
of these items off, Windows can divert the resources to more useful
activities, such as running your programs.
In Windows XP, open the System control panel and click the Advanced
tab. Click Settings
and then select the radio button marked Adjust for best performance
. This will turn off some of the frilly effects, such as drop shadows under your menus, and make Windows a little snappier.
Vista, start by disabling the resource hog known as the Sidebar. In
both Vista and Windows 7, turn off the Aero environment to reclaim some
of your PC's lost memory and processor power. To do this, right-click
the desktop and choose Personalize
from the context menu. In Vista, click Window color and appearance
and then uncheck the box for Enable Transparency
. In Windows 7, select the theme labeled Windows 7 Basic
Shut down memory-hogging apps
you've installed a fair amount of programs on your PC -- your "core
base" of apps, as it were -- you'll want to check that you don't have
any unwanted applications running in the background that could slow
down your PC. Such programs may be designed to launch when Windows
starts up so that you can load their corresponding applications faster.
The problem is that they run all the time, regardless of whether you
intend to use the parent application.
In Windows 7 or Vista, click Start
and type msconfig
in the "Search programs and files" field. Press Enter
. In the System Configuration window, select the Startup
tab. In the Command column, look for any programs that you don't want
to wait for at boot-up time. For example, take iTunes: If you've
installed this application, you'll find both iTunesHelper.exe and
QTTask.exe. They're unnecessary additions -- the former launches when
you start iTunes anyway and the latter merely places a QuickTime icon
in the corner of your screen for easy program launching. Uncheck both.
Once you've checked all of the programs you want to launch at startup
and unchecked the programs you don't, click OK
In addition to startup programs, you can find services on your PC; Microsoft recommends trimming them as well. Click Start
, type services.msc
into the search field and press Enter
. Up pops the Services window, a list of options and executables that's even more confusing than the Startup window.
To identify which services to turn off (and which to leave on), check out Black Viper's exhaustive list of Windows 7's services
across all of its various editions, along with a list of which services
you should modify and how you should set their parameters. Armed with
this advice, just double-click on any listed service. You need concern
yourself only with the "Startup type" listing in the screen that
appears next. By switching among the Automatic, Manual and Disabled
modes, depending on Black Viper's recommendations, you'll be able to
control exactly how services launch -- if at all -- during the Windows
startup process and during your general use of the operating system.
Every little bit helps.