Question about Sony PlayStation 2 (PS2) Console

1 Answer

Multi taps do'nt work with my PS2

I have a model SCPH 50001/N. I have had two differrent multitaps and neitherr one will work at all, both are from Game Stop and have no instructions. Please help, this is for my kids.

Posted by on

  • prince baffour Mar 29, 2009

    since i got the ps2,it cannot read any disk,due to no multing!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Ok Turn On Your PS2 Make Sure You Don't have a disk inside. It should show you Browser, System Configuration, and if u press triangle it will take u to the Version menu go to console look at you console code ex. SCPH-77001. Then look at you muti tap to see if they have the same code if it does should work not the same code will not work.

Posted on Feb 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My PS2 multitap has been working fine for years and now suddenly when plug it in the playstation in port 1or 2, the playstation will only read the controller in port A in the multitap so i can still only...


if you already tried to use a working controller on the other port and still it wont work it only means that the other port of your multi tap is already malfunctioning

Oct 03, 2010 | Video Game Consoles

1 Answer

Wrong multi-tap


I allowed my 11 year old to do it and now it works!

Dec 25, 2008 | Sony PlayStation 2 (PS2) Console

1 Answer

Which multitap do I buy?


There were two versions of the multi-tap made; one for the original fat PS2 and a smaller version made for the slim. The two versions are incompatible with the other PS2. If you have the original multi-tap connected to the slim, it should throw out the 'controller disconnected' message when you boot up. The slim version of the multi-tap should have a sticker on the bottom saying 'only works with models SCPH-70000, SCPH-75001, SCPH-75002'.

Other than the sports games, I don't recall any titles that allow more than two players anyway.

Nov 25, 2008 | Sony PlayStation 2 (PS2) Console

2 Answers

PS2 Modded Trouble Reading DVDr's


Your DVD potentiometer pot on the back of the PS2 laser lens needs to be readjusted. Some people will try to tell you it's out of alignment but if that was the case it would not read CD's. Some people will try to tell you the laser lens is bad. If that was the case it would not read CD's. On the back of the laser lens are two potentiometer pots. In english? Two lil screws that are turnable. One controls the power of the DVD laser one controls the power of the CD laser.

http://www.cyber-mag.com/station/laserV9.htm

That link will give you pretty lil pictures of what i'm talking about :)

In a nut shell the story goes like this folks. If your PS2 won't read certain game DVD's that are of a certain color or if it all of a sudden mysteriously fails to read games it once read but will play cd's just fine, the voltage of the laser for DVD's is not set correctly. (this does needs manual tweeking from time to time if you take your ps2 and move it around alot or if you take it over to friends houses etc etc. Basicly alot of movment in general can take this out of alignment. Even keeping the PS2 on it's side could theoreticly (just my opinion) based on gravitational pull, unbalance the potentiometer.

RESOLUTION:

Step 1 identify your PS2 version:


Version 1 - SCPH-30001, 10 screws on bottom of case, serial no. starts with "U1"
Version 2 - SCPH-30001, 10 screws on bottom of case, serial no. starts with "U0"
Version 3 - SCPH-30001, 10 screws on bottom of case, serial no. starts with "U2"
Version 4 - SCPH-30000, 30001, 35001, 30002, 35002, 30003, 35003, 30004, or 35004, 8 screws on bottom of case

NOTE: Version 4 has 2 varieties of motherboard: Gap/No Gap, the difference between v4 "Gap" and v4 "No Gap" is the "Gap" is there's a spot in the center of bios chip where each side lacks solder points.

Version 5 - SCPH-30000R, 30001R, 30002R, 30003R, 30004R, or 30006R. Also, some SCPH-30000, 30001, 30002, 30003, and 30004 models have a V5/V6

NOTE: Version 5 & 6 - the difference between these two versions is one of the connectors in the corner.

Version 7 - SCPH-39000, 39001, 39002, 39003, 39004, 39008 or 37000
Version 8 - Only in Japanese consoles. SCPH-39000, or, SCPH-39006 (GH-022 BIOS 090)
Version 9 - if you have SCPH-50000, 50001, 50002, 50003, 50004, 50006, or 50007 you have a v9 or v10 board.
Version 10 - SCPH-5000x, with date code "3D" to the right and below the serial number on the back of the console. (GH-026 board)

NOTE: To know if its a v9/v10 start up PS2 with no game in it ,press triangle and check dvd driver version dvd ver 3.00 = v9 & dvd ver 3.02 = v10.

If your model # is SCPH-50000, 50001, 50002, 50003 or 50004 AND if you can find a small ''a'' under the SCPH number or have DATECODE "3C" you have a V9 PS2 main board. (GH-026 board).

If your model # is SCPH-50000, 50001, 50002, 50003 or 50004 AND if you can find DATE CODE "3D" as shown below, you have a V10 PS2 main board. (GH-026 board).

Version 12 - The new slimline PS2 consoles are referred to as PSTwo here, but elsewhere they are also known as "v12" units... their numbers are SCPH-70011/SCPH-70012, and also SCPH-70004 CB (Belgium).

Step 2 use either google or the link above. If you're using google your keyword search will be something like "ps2 v12 laser lens adjustment" *replace v12 with your ps2 model.

In either case navigate to the site and follow instructions to set the pots back to their factory default settings.

Oct 11, 2008 | Sony PlayStation 2 (PS2) Console

1 Answer

I can't seem to get my ps2 silver multi tap to work


first of all make sure that the multitap is compatible because some multi tap for the thick console doesn't work on the slimline type

you can always check your console's manual for the compatible model of multitap for your console

Jun 29, 2008 | Sony PlayStation 2 (PS2) Console

1 Answer

I inserted a multitap into my PS2 and it shut the consul off. And my Ps2 displays this screen and says please insert a Ps2 format disk.


I bought the Multi-Tap. I have tried to set it up for 4 players and it doesn't funtion. I have the right game and still it doesn't even respond. I checked the Version and it was a right one. I plugged it into Port 1 and plug 4 controllers into the Multi-tap and a memory card into Multi-tap's Slot A. What should I do? All I am guessing is that the product was deffective. Am I missing something?

May 03, 2008 | Video Game Consoles

1 Answer

Only one controler works via the Multitap


did u check the right insert? if so, check one more time.

Dec 31, 2007 | Sony PlayStation 2 (PS2) Console

1 Answer

Multiplayer doesn't work


  • loading a different disc to see if the problem continues.
  • Try inserting the controller into either controller ports (1 and 2) to see if the problem continues.
  • Try a different controller and/or memory card to see if the problem continues.
  • In certain games, there are on-screen "controller options" where you can designate which character (or team) you want your controller to control. Make sure that these options have been verified within the game.
  • Make sure there are no obstructions in the controller or memory card ports (i.e., lint, debris, etc.).
  • Make sure the controller cables are in good condition, free of cuts, frays, or other visible damage.
  • Make sure the controller and the memory card is plugged into their respective ports completely.
  • Make sure the analog button in the middle of the controller is pressed. Toggle this button On/Off to see if either mode helps the controller function properly. This can also help troubleshoot the vibration function with the DUALSHOCK®2 analog controller.
  • Make sure all of the controllers and memory cards (or any other peripheral) you own are licensed[1] for use with PlayStation® products. (Licensed products have the official "PS" logo on the product.)

    Sony Computer Entertainment America, Inc. (SCEA) manufactures the following first party peripherals[2]. There may be other third party peripherals that are licensed; please check with the third party manufacturer directly.

    - DUALSHOCK®2 analog controller: Model SCPH-10010
    - DUALSHOCK® analog controller: Model: SCPH-110
    - Memory Card (8MB) (for PlayStation®2): Model: SCPH-10020 or SCPH-10410
    - Memory Card: Model: SCPH-1020
    - Multitap (for PlayStation®2): Model: SCPH-70120 (for 70000 Series only)
    - Multitap (for PlayStation®2): Model: SCPH-10090 (for 30000 - 50000 Series only)
    - Multitap: Model: SCPH-1070 (for PS oneTM or 30000 - 50000 series PlayStation 2 only)
    - DVD remote control[3] (for PlayStation®2)

Dec 17, 2007 | Sony PlayStation 2 (PS2) Console

1 Answer

PS2 DVD version


Hi SDK0013,

I am not sure which version PS2 you have but the only way to realy get there is to change the motherboard from one version to another. 

I know that SCPH-50001 Motherboard will fit in a  SCPH-39000  case.

Oct 25, 2007 | Sony PlayStation 2 (PS2) Console

Not finding what you are looking for?
Sony PlayStation 2 (PS2) Console Logo

447 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Game Consoles Experts

Iron
Iron

Level 3 Expert

3018 Answers

Troy Gorman
Troy Gorman

Level 3 Expert

508 Answers

Marc
Marc

Level 2 Expert

68 Answers

Are you a Sony Video Game Console Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...