Question about GE WSXH208A Front Load Washer

1 Answer

Water left in washer

I have a new GE Adora front end load washer and at the end of the wash cycle there is still water left in the machine. If you open the door water will pore out. It is only about a year and a half old. Has anybody else had this problem or know what it might be.

Posted by on

  • puma03 Feb 16, 2009

    Actually it was as easy has taking the front off of the machine at the bottom and unscrewing a cap, which is the filter, and cleaning it out. Now things are working O.K. Thanks for your help.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 121 Answers

You must change new pump.

Posted on Feb 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

GE Adora front load washer turns until water is added then won't turn or spin


You should contact GE or qualified appliance repair center to be looked at professionally.

May 06, 2012 | GE Wh12x10309 Heater for Adora Front Load...

2 Answers

GE Adora Front Load Washing Machine Problem


Hi,

Have you tried a full hard reset? This is simply unplugging the unit from the mains for a couple of hours.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Apr 10, 2008 | GE WSXH208A Front Load Washer

1 Answer

My washer will not start. I press the start/pause button and it just beeps twice and does not lock door or start wash. ge adora model wcvh6260


clean the drain filter located behind the front lower panell, its prob. holding excess h2o and wont let the water fill cycle activate. this happened to mine.

Aug 11, 2009 | GE Energy Star WCVH6260F Front Load Washer

2 Answers

Front load ge washer does not finish cycle


This model does not have a drain filter. There are filter screens inside the inlet valve where the hoses attach onto the machine. Take hoses off and look inside where the water goes into machine to see screens. Also, take the other end off hoses to make sure there are not screened hose washers in either end of the hose which may need to be cleaned or replaced.

Oct 18, 2008 | GE WSXH208A Front Load Washer

1 Answer

Ge front load washer model WSXH208A Will not spin


Mine kept stopping mid cycle also, pouring water on the floor, then the start/pause button flashed and the door unlocked. I found the solution to clean the lint filter on the GE Adora. Go to http://www.instructables.com/id/GE-Adora-Lint-Filter-Cleanout/?download=pdf

I just did this and my washer is now running instead of the flashing start/pause and door unlocking. It was fairly easy. Make sure you have towels and a flat pan to catch the water if you don't have the machine on a riser. There may be water inside so a wet vac may be helpful too. Once my washer finishes what was in it, I have these funky towels to clean. You'll be very surprised what you find in the filter! Best of luck!

Oct 13, 2008 | GE WSXH208A Front Load Washer

1 Answer

GE Adora Front Load Washer


I went to the home depot site and they have various videos that explain about the washer and how it works. This made my understanding more clear as to how the washer works. Thanks!

Jul 25, 2008 | GE WSXH208A Front Load Washer

2 Answers

GE Adora front load washer overloaded now won't start


Washers - Resetting Electronic Controls on a Washer

If there is a pause in the washer cycle, the controls will lock up. The pause can occur because of a power failure or it was put in the test mode at the factory.

Also, if the washer was stopped before the cycle was complete or the consumer has pushed the stop/pause button to temporarily stop the cycle and the cycle is not reset. Over a period of 24 hours, the washer will pump out and spin, but will stay in the final spin.

To correct the situation, shut off the circuit breaker for 30 seconds or unplug the washer, then turn the timer knob around and back to any position other than final spin. Verify the water is turned on and restore power. This should resolve the issue.

Apr 23, 2008 | GE WSXH208A Front Load Washer

3 Answers

GE ADORA model WHDVH626FWW


you have to clean out the filter on the bottom by removing the lower panel and twisting the cap... careful lots of water comes out but will work great after

Nov 24, 2007 | GE WSXH208A Front Load Washer

Not finding what you are looking for?
GE WSXH208A Front Load Washer Logo

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Tim Whalen

Level 3 Expert

3069 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...