Question about Linksys Wireless-G WRT54GS Router (e125894)

2 Answers

Linksys WRT54GS I have a Linksys WRT54GS version 7 that is no longer working and I bought a new router from NetGear. Do I need to uninstall anything before I set up NetGear router?

Posted by on

  • hollkey1 Feb 15, 2009

    Thank you. I am not sure how to get to my Linksys' admin page. My router was working fine until I tried to add a wireless printer.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 159 Answers

No you really dont need to uninstall anything before you set up. You can if you like tho.

Posted on Feb 15, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 77 Answers

No, you should however, log into your Linksys's admin page and copy your settings down. Put those back into your Netgear and you should be good to go.

Posted on Feb 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Where can I find Linksys wrt54gs ver. 6 driver download?


you dont need cd installation to configure linksys router

goto ip addrees default ip is 192.168.1.1
is going to take you to configure setup screen

i can give you suport i work for linksys and verizon internet

Apr 29, 2010 | Linksys Wireless-G WRT54GS Router...

2 Answers

My Linksys WRT54GS ver. 6 Router continuously blinks


Try un-plugging all the cables from the router for 30 seconds, then re-connect them.

Hope this helps!

Feb 04, 2010 | Linksys : WRT54GS Wireless-G Router W/...

1 Answer

So I really need help. I have a Linksys (WRT54GS) wireless router upstairs connected to the internet, printers, etc. and a Netgear (WGT624) downstairs connected to a desktop, xbox and laptop. I don't want...


More information is needed.
Is the 'WAN' port on the Netgear router connected to anything?
(cable-modem? DSL-modem?)

How many friends will come over at the same time?
How many 'LAN' ports are on the Linksys? How many ports are "free" ?
How many 'LAN' ports are on the Netgaear? How many ports are "free" ?
How many "spare" Ethernet cables do you have?

Is your goal to provide computer-to-computer connectivity,
or are you just trying to provide Internet access for everybody?

If you are "downstairs", is the wireless signal from the "upstairs" router strong-enough to provide wireless coverage "downstairs"?

If you are "upstairs", is the wireless signal from the "downstairs" router strong-enough to provide wireless coverage "upstairs"?


Jan 04, 2010 | NetGear WGT624 Wireless Router

1 Answer

I have a netgear ds116 hub and i want to set up a linksys router


Here's what you can do. Don't connect the Linksys router yet to the hub. Connect 1 computer directly to the Linksys router. Access the router's setup page of the Linksys router thru http://192.168.1.1

It will prompt you for username and password. No username and password is admin.

Look for Local IP Address or LAN IP Address. Change the LAN or Local IP Address of the Linksys router to 192.168.5.1 then click on Save Settings at the bottom. Right after saving the settings, unplug the power of the Linksys router, connect it to the hub and it should be good to go.

Oct 06, 2009 | Linksys Wireless-G WRT54GS Router...

4 Answers

Need lynksys installation cd, do you know where I can find it?


You download the software needed to configure your Linksys wireless router from Linksys website.

If you have version 7.2 click below
http://downloads.linksysbycisco.com/downloads/WRT54G-v7.2_Setup_Wizard,0.zip

If you have version 7.0 click below
http://downloads.linksysbycisco.com/downloads/WRT54Gv7-EU_v7_00_4,0.zip

Take your pick.

Sep 22, 2009 | Linksys Wireless-G WRT54GS Router...

1 Answer

My WRT54GS Linksys router has all lights green -but will not allow any computer access off of any of my 6 computers. If i hook the computers up to the modem everything works. I checked the cords, the power...


do one thing just download the firmware from the website i give you link go for it for latest version then download it after that you upload to the router then you try it you got it this is a link


http://www-in.linksys.com/servlet/Satellite?c=L_CASupport_C2&childpagename=IN%2FLayout&cid=1166859839192&packedargs=sku%3D1139845557375&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=3919257375B07&displaypage=download#versiondetail



May 05, 2009 | Linksys (WRT54GC) Router

1 Answer

I lost my install disk and cust service is no help at linksys


http://www.linksysbycisco.com/US/en/support/WRT54GS/download

Rate fixya if helped

May 03, 2009 | Linksys : WRT54GS Wireless-G Router W/...

1 Answer

Linksys router not connecting


Very hard to say without getting into more technical details. Sounds like you may have a bad router, but more likely there is something wrong with the setup. You probably need someone with technical expertise to walk you through all the steps.

Have you tried calling Linksys tech support? They may be able to help. Also, you might try buying a different router just to give it a try. I've had good success with Netgear in addition to Linksys. I generally stay away from DLink.

Dec 12, 2008 | Linksys Wireless-G WRT54GS Router...

1 Answer

Linksys WRT54GS router needs to be rebooted frequently


Try to leave of air for an hour, untill its cold, then reconect it, if the time untill it quit conecting is consitrly longer, your Linksys is dying.
/Teis

Dec 07, 2008 | Linksys Wireless-G WRT54G Router

5 Answers

Linksys wrt54gs cant connect..


hi try this before you hit the reset botton. Check if Windows XP firewall or 3rd party firewall are blocking the pings, and temporarily disable them just to be sure. The WRT54GS has a feature called "AP Isolation", It's on the "Wireless -> Advanced Settings" page. You won't need it for home use so turn it off as well. Last thing, do a firmware upgrade. Hope it's helps Good luck.

Mar 20, 2006 | Linksys Wireless-G WRT54GS Router...

Not finding what you are looking for?
Linksys Wireless-G WRT54GS Router (e125894) Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Mike

Level 3 Expert

4331 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Linksys Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...